USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Multi-Rotors & Parts > Flight Controller
> Robotics & DIY > Arduino

  RATED:

MultiWii Lite V1.0 Flight Controller w/FTDI

MultiWii Lite V1.0 Flight Controller w/FTDI
MultiWii Lite V1.0 Flight Controller w/FTDI

The Multiwii Lite V1.0 is a gyro/accelerometer based flight controller that is loaded with features. With expandability options and full programmability, this device can control just about any type of aircraft. This is the ideal flight controller for your multi-rotor aircraft.

Features:
 • Small size, 35x35mm mounting holes
 • 6 input channels for standard receiver and PPM SUM receiver
 • Up to 8-axis motor output
 • 2 servos output for PITCH and ROLL gimbal system
 • Can utilize a servo's output to trigger a camera button
 • FTDI/UART TTL socket for debug, upload firmware or LCD display
 • I2C socket for extend sensor, I2C LCD/OLED display or CRIUS I2c-GPS NAV board
 • Separate 3.3V and 5V LDO voltage regulator
 • ATMega 328P Microcontroller
 • MPU6050 6 axis gyro/accelerometer with Motion Processing Unit
 • On board logic level converter

Flight modes:
• Acro
• Self-Level

Specs: 
Dimension: 40x12x40mm
Weight: 9g
Fixing hole spacing: 35mm (It can be changed to 45mm by CRIUS Distribution Board)
Hole diameter: 3mm

Package content:
MultiWii Lite FC x 1
USB program board x 1 (Mini USB cable required but sold separately)
3Pin to 1Pinx3 cable 100mm x 2
3Pin to 3Pin cable 100mm x 1


More information can be found on the Multiwii Website.
http://www.multiwii.com


PRODUCT ID: 381000134

This product available from a warehouse near you!


Weight: 31g Quantity: 
United States Warehouse Out Of Stock
stock
-4
Price$26.29


acc.
  • Turnigy Mounting Box for MultiWii AIO Flight Controllers

    Combo Price: $5.25   IN STOCK



Further discounts available for registered & logged-in customers.
STOCK ARRIVAL ALERT

Enter your email address to get an email the second new stock arrives.
Estimated factory delivery date;
 Customer rated
46
crowns
  
 
Total of 36 discussions.
Joshua  1 points - 3/5/2014
 
love this board on 2.1 firmware, but having a hard time getting 2.3 to flash to it. Anyone have success in putting 2.3 on her?
logic  19 points - 12/9/2013
 
question does anyone have any info on the stock config of this board? i cant seem to find any good info on it.. thanks
McGuyver45  1 points - 11/25/2013
 
NEED HELP WITH MultiWII Lite!! I'm ,hoping someone can help me. I just got this FC and i'm having one hell of a time setting it up. I cannot get the accelerometer to function properly. I updated to 2.0 and have read thru many forums but still cannot get it to register in GUI. I keep getting I2C error codes. Once it registered and went haywire in the GUI screen, but mainly it just doesn't register at all. Also, checked controls and all are correct except the tilt. Front right motor and rear left motor speed up as you pull back on the elevator stick. All other controls are correct. I'd really appreciate any help!! Thanks!
thomas  9 points - 11/22/2013
 
arduino is freezing during the upload. Im trying to flash multiwii 2.3 and have defined #define CRIUS_LITE // Crius MultiWii Lite #define MPU6050 //combo ACC #define FORCE_ACC_ORIENTATION(X, Y, Z) {imu.accADC[ROLL] = Y* imu.accADC[PITCH] = -X* imu.accADC[YAW] = Z*} have tried various board types, programming using ftdi, wish id have stuck with the AIOP! much easier!
John  14 points - 11/2/2013
 
hi, noob question here, apparently hk doesn't call them wires, cables, or leads, receiver wires, controller wires or servo wires. I have been trying the search here with no joy, All I find are F to M servo "extensions." Please, where do you buy those 10cm - 20cm "male to male" bright, plastic coated magic-metal strings with plugs, designed to connect the pins on these boards to the RX? Seriously.. Thanks! **divot (I'm looking for the exact same wires pictured in the last pic above.)
Customer Reviews
Overall Rating
AVRBrasil
33 likes
Value
Quality
Like it?
Esta placa tem o basico, giroscopio e acelerometro, oque jah eh ohtimo, ainda tem a vantagem de poder agregar mais sensores posteriormente, coisa que a KK2 nao tem. Existe um forum em portugues com uma galera ohtima que entende muito sobre Multiwii em www.multirotores.com.br


2 comments. Reply..

Create an account
Overall Rating
iPetePete
4 likes
Value
Quality
Like it?
This is nice. Get your wii on.


No comments. Reply..

Overall Rating
PeterBe
71 likes
Value
Quality
Like it?
Unusable due to lack of even basic instructions , for me anyway . If you don't already know how to set this board up suggest you choose different one .


1 comment. Reply..

Overall Rating
Eduardo
25 likes
Value
Quality
Like it?
Works OK but you need to recompile the firmware since pitch and roll sensors are in wrong direction. Add to def.h: #if defined(HKING) #define MPU6050 #define GYRO_ORIENTATION(X, Y, Z) {gyroADC[ROLL] = Y; gyroADC[PITCH] = -X; gyroADC[YAW] = -Z;} #define ACC_ORIENTATION(X, Y, Z) {accADC[ROLL] = -X; accADC[PITCH] = -Y; accADC[YAW] = Z;} #endif and the define this board in config.h


5 comments. Reply..

Overall Rating
Piermaria
20 likes
Value
Quality
Like it?
Italiano Ottima, come tutte le CRIUS, economica e prestante. Tuttavia se con la versione 2.1 di Multiwii tutto funziona a dovere ho un grosso problema con la versione 2.2. In pratica anzichè spegnersi quando se ne da il comando tutti i motori salgono di giri di colpo fino a sollevare il multirotore col risultato di avere un incidente sicuro specialmente se si è impreparati. Solo dopo vari tentativi di spegnimento i motori si fermano. Quindi sconsiglio caldamente di caricare la ver. 2.2 di Multiwii, a meno di capire qual'è il problema e di averlo risolto. ENGLISH Excellent, like all CRIUS, economic and handsome. However, if with version 2.1 of MultiWii all goes well I had a big problem with version 2.2. In practice, instead of turning, while giving this command, all engine climb speed of shot to lift the multicopter with the result of having an accident, dangerous especially if you are unprepared. Only after several attempts to switch off the motors stop. Therefore strongly advise against loading the ver. 2.2 of MultiWii, unless you understand what the problem and have it fixed.


No comments. Reply..

.....click here to see all reviews
Aff. Link