Compatible with all Spektrum DSM2 Air transmitters.
OrangeRx receivers are built using original components and MCU's and with state of the art SMT automation to ensure a quality product each and every time.
All OrangeRx receivers are QC tested before leaving the factory.
The OrangeRx will work with ANY Aircraft Spektrum DSM2 2.4Ghz transmitter
The OrangeRx 6ch is only 3.7g in weight and 19.5x30x10mm in size. Great for small planes, heli's, parkflyers or even medium sized sport planes.
Super light weight 3.7g / 9.8 grams with case.
Compatible with DSM2 1024/2048 aircraft radio and module systems.
Compact design 19.5mm x 30mm x 10mm, with case 43x22x13mm.
Short 29mm antennas for mounting in almost any location.
Input voltage: 3.7~9.6V.
Satellite port included. (Increased redundancy and link strength)
Two CYP chips used. Making it a true outdoor receiver system.
12 Month replacement guarantee!
OrangeRx R610 DSM2 Compatible receiver
1) Accepted by the MAAA in Australia, see the MAAA MOP58 for guidance.
2) This is not a Spektrum receiver, nor is it a copy of a Spektrum Receiver.
The Spektrum brand is a trademark of Horizon Hobbies USA.
3) Price of this receiver may fluctuate (up or down) due to cost of electronic components.
4) This is not an underground manufactured fake Spektrum receiver. OrangeRx quality is guaranteed.
- Blade Count:
Specs indicate up to 9.6V input, so I decided to cut some weight on my slope soarer and remove the bec and instead power with 2s lipo.
Byebye receiver AND servos :(
I spent several hours sanding each of the 6 servo connectors in order to make them fit in the receiver! The receiver male servo connector slots are not wide enough for a standard female servo! Who designed the row of male servo connectors? You need to allow space BETWEEN connectors & for the wire end of the connector which is typically wider those requiring even more space!
I bought 3 receivers - I have to sand down the connectors for all those servos as well!!!!!
The receiver works perfectly otherwise. The LED has many blinking
patterns when something is wrong in the initial arming. Very helpful.
Perfect and cheap receiver! Know many people who have also no problems
Seems that 615 model replaced this one
I got three of these some time ago. They worked great. They are a great low price alternative to Spectrum receivers.
Fantastic item, I use them all the time. Acceptable quality, nice price, shiny looks - what else can you expect? Got them cheap from HK.
Binds very fast. I use them in my helis and multicopters. No issues so far. I'll stick with them and order some more.
got 4 of them ..works fine
Works well with a JR Orange 2.4 Module. I stripped the case off to reduce weight for a light indoor foamy. Was pleasantly surprised by the quality. Will buy more!
Got the tx and three 610's today and have been busy reading the manual and checking them out for setup in a little foamy delta quick build. The 610's are tiny and very light and seem to be quite robust. All three bound without a hitch and the responce to the setup programing was right on. So far so good- now for a flight test.
pretty small receiver, works much better than excepted!