USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
With v2 firmware update, correcting many flaws of the previous 9X, plus inbuilt 2.4Ghz (no daggy second antenna) this is a quality, reliable 2.4Ghz system suitable for beginners and pro pilots alike. Get that locked-in feeling that only 2.4Ghz glitch free technology can provide. Ultra fast reaction times and interference free control of your model is only achievable with this 2.4Ghz technology.
Without a doubt, the best value 9Ch system available!
Number of Channnel: 8ch ppm/9ch pcm Display: 128*64LCD Support Type: Heli/Acro/Glid Support user: 8 Stick model: 4 Encoder type: ppm/pcm Subtrim: Yes Simulator Interface: Yes Buzzer: Yes Low Voltage Show: Yes
Important. The TURNIGY 9X has been reflashed with the new v2 firmware, fixing previous menu and mixing issues. This firmware flash is only available from our TURNIGY 9X system as we flash each unit in our office before it is shipped. Purchases of any other rebranded version of the TURNIGY 9X will not have the latest firmware and patches (even the OEM factory does not have these updates).
NOTE: "SWITCH ERROR" means you have one of the switches in the wrong position when you turn the radio on. It is not a fault.
Modified my 9X radio to add a full size joystick for ail, elv, rud control with stick. Been wanting to try this for a while. Used a Logitech joystick. Have switch mounted to use radio gimbals or switch to joystick control. Will be fun to see how well it works. Put a picture of it in the files section.
Hola... Le cambian el modulo RF por otro de mayor alcance... Frysky, JR,etc... el compañ*ero que pasó* del km lo hizo con el transmisor y mó*dulo original que viene con la 9x....Saludos!
Osea que le cambian lo que viene siendo el mó*dulo de potencia no? por asi decirlo este mando está* dividido en dos, la parte de control y tal y de usuario y luego la parte de potencia, que es la que se pone por detras, que se puede quitar y poner otra de mas mW, te refieres a eso no?.
Entonces como podria conseguir un alcance de 3Km por ejemplo? no me serviria con un mando de estos no? tendria que usar uno de los que se les despliega la antena, que entiendo que tendrá*n má*s alcance...
La antena está* bien como está*, corta, piensa que es 2.4ghz.... No se mucho de fpv, pero con estos modulos y receptores especiales, sensores,etc para fpv tienes que llegar a los 3km!...Saludos
Is it possible to have this radio control (mode 2) delivered in Australia (Sydney) in one week if I buy it from the international warehouse? I´*m staying there for work only for 10 days. Thanks!
A better thought on this would be to use the OrangeRX V2 flight stabilizer, which is what I am using in my Funfighter. This will work with most any receiver.
If you mean for the battery to power this tx, you can 2S to 3S battery of any discharge rate. As long as it fits the battery compartment and battery plug.
Actually, it is much better to use a transmitter pack (below 2s) for this TX. If the regulator goes into a thermal runaway condition, it can damage the circuitry, whic a 2s discharge rate would prevent. You can use a higher discharge battery temporarily though.
I didn't noticed any bearings in gimbals,
when replaced gimbal potentiometer.
On one side gimbal hangs directly on potentiometer
on other side... just a plastic axis in plastic hole.
roger,,thankyou, kaya lng on process na yung 9x mode 2 koh,,,,
try ko muna it with basic,,,first time klng kasi din magfpv kaya im tracking how long the range this transmitter can take,, im mostly involve in speed plane,,,
It will work, but the discharge plug for that lipo is a JST, there's a chance that you might reverse the polarity. remember to insert the side with the red (positive) wire to the center. I wouldn't to prove if the safety protected feature really works.
You can use any 3S LIPO pack which will fit 32x30x110 battery compartment size.
The most mAH with "Rhino 2620mAh 3S 11.1v Low-Discharge Transmitter Lipoly Pack" (ID:R2620-TX-3)
But you would need to adopt pack connector.
Here we go again sorry for the caps. THE 9XR BATTERY DOES NOT FIT THE 9X, WITHOUT MODS TO THE BATTERY COMPARTMENT! I am saying this because so many people have been stuck thinking it will fit. Use a LiFe battery, Hermit is right on this. The 9x voltage regulator was not designed for a 3s LiPo either, and there are reports of the radio burning out over time.
FrSky DF 2.4Ghz Combo Pack for JR w/ Module & RX...eto yung sinasabi roger, 52 usd FrSky Telemetry Reciever upgrade USB/Serial lead interface,,,quite complicated upon upgrade, never done this,,,can u help me for that....one thing yung module sa likod nitong turnigy 9x, diba when you pull it out, is there any connection with the radio itself?
Yan nga, yung FrSky Telemetry Reciever upgrade USB/Serial lead interface, di mo na kailangan, naka version 2.0 na ang frsky receiver and tx. For the 9X, me wire na lumulusot from tx module to the tx itself. The module is not completely removable. If you are considering to buy the frsky module as well, better go with 9XR, wala ka nang gagawing mod masyado. Di gaya ng 9X. google mo turnigy 9x mods, halos lahat yan ginawa ko.
Yes, yun nga. Kunin mo yung product ID: DJT, telemetry capable na ang kasamang receiver nun. You will get beep alarms when the receiver is going out of range.
Yes frsky tx module will fit, choose the one that says JR compatible. Some modding is required to fully fit the DJT module. It won't snuggly fit with the turnigy 9X module bay, kailngan konting bawas sa plastic na nakaharang sa pins ng frsky module.
I have burned the alim board, is it possible to replace the alim board, I am interested to receive an URL providing replacement board to buy for the old Turnigy 9x. thx for your help - Thierry
It work perfect. With the original module you should be able to reach probably 1km, but this depends on the environment. With the FrSky module you can reach at least 1,5km. Hope this info helps you.
The Range of this thing really sucks ..
sometimes i go up to 900 meters .. sometimes i almost crash my quad from 350 meters only using the stock module ..
got the Dragonlink now :) , worth the price
whom as. who does not like the look of the new transmitter ...who does not like you need to purchase a separate module and receiver. but 9xr have new firmware/ hve more settings. 9x - sales with transmitter module and receiver. 9x will be cheaper than buying 9xr and buying a transmitter module with receiver
see Bruce's (rcmodelreviews) review on youtube. this tx scored the same with the 9xr in terms of ergonomics, firmware and features. This one's even better in terms of switch accessibility than 9xr
Better or worse is only relative to your uses. Me I have big hands, and I have no problems with the switches on the 9xr. For me, the 9xr is better, but maybe not for you. To really know the best thing for you, you should assess your uses or needs. I got the 9xr for parkflyers, but now I am setting it up for FPV. It's all good for it. If you are happy modifying that confounded antenna wire, the 9x can do what you want similar to the 9xr. All in your court, go figure!
Nope, in it's soock configuration, it will not. You need to get the OrangeRX module to do that, and if you do, you might as well get the 9xr, to avoid doing mods to the antenna wire on the 9x.
I am using an ASSAN hacker modulewith the 9X Tx. With no recievers available I hooked up the Hacker as follows: 1- Top Pin signal 2- no connection 3- Red plus 4- Black - 5- no connection.
You can see photo's at www.link only gave it 4 stars as the TX did not work as recieved, one of the wires to the dual rate switch was not connected, an easy fix.
I'd give this radio a 5 star rating but there are a few minor things that subtract points. -One is that putting the batteries is a hassle, the 8 AA cell holder is OK, but the cable gets on the way of the cover and it takes a while to be able to close it, there's a lot of pinching of the cables involved so I shouldn't wonder if the insulation fails sooner or later requiring a replacement of the cables. -Second is the very annoying and loud BEEEEP!!! you get with every-single-click you do on the buttons, seriously stressing to set up the radio at home, not good for conjugal life. To fix that I cut the leg that goes from a transistor to the speaker and added a 220 Ohm resistor in between. -Third, no manual comes with the radio. -Fourth setting up a V-Tail was a mind bending affair, I succeeded but I couldn't grok the logic of the procedure.
Besides those things it's a good product.
25 comments. Reply..
Overall Rating
The1CZ
212 likes
Value
UNRATED
Quality
UNRATED
8 thumbs up!
I have one of those and i have kinda problem with display, there is some cold conract, on mainboard, ans still bordering me all the time( otherwise seems ok the menu and functions.
2 comments. Reply..
Overall Rating
FlyCH
138 likes
Value
UNRATED
Quality
UNRATED
8 thumbs up!
I purchased this transmitter & Assan XJ8 module from HC. First I got around the switch error bug (thanks to that reviewer) For me the Assan XJ8 just flashes red once on start up, but gives no steady red LED & will not go into pairing mode. Assan say they don't know the problem & suggest putting XJ8 in another TX (I don't have one) Anyone know how to test if TGY 9X or Assan is the problem? Thanks
11 comments. Reply..
Overall Rating
soloman572000
57 likes
Value
UNRATED
Quality
UNRATED
7 thumbs up!
Great range - over 3000m, but realy to big receiver. Also dont like to small battery compartment, and antenna linked with wire. You Also can't mix with AUX cahnnels - you can oly mix first 4 cahnells. No manual - It could be at least link at this product to download manual for Turnigy 9x. Also don,t like that this transsmiter in almost never in stock, or that there smaller 6 ch receivers I waiting for more 3 months So from me only 3 stars.
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
.jpg)
.jpg&width=48)
.jpg&width=48)
.jpg&width=48)
.jpg)
