Does this thing clog repeatedly? requiring one to cut a bit off the end .. every day! Just Like the other add on tips?
One used to be able to buy lengths of fine Teflon tubing. It almost Never clogged with dried CA
I have on occasion been able to use one repeatedly, I learned that if you store it straight up the CA usually runs out. But most of the time I only get a one time use, no big deal for me. The nice thing about these is that at 1 gram it tops off an order nicely. When I ran out of these I used 2mm heat shrink once, it worked ok but not as fine as these. . . .
Well yes and no. If you use it and then store it as is, it does. However once you are done using it tap the nozzle base with your fingernail/pencil. You will see the level drop off
Once it goes past the thin capillary ...yo u are good. I generally squeeze to let the extra glue out and wipe it off nicely. Never clogs that ways. To be safe try putting a small piece of paper that will stick to the residue
Next time just pierce it as you would for a new one. Or just pull it off using fingernail. It will come off with the dry glue, leaving the nozzle intact
Hiya O teo, these Ex-long CA Tips are back in stock now. I bought a bunch to ensure i will not be waiting years for them :) Get some now bro, quick. They are cheap and sooo light they dont add to your postage :) Good luck my friend.
These are the best way to get the CA just where you want it without wasting glue. The tip is 68.73mm long, the top diameter is 6.5mm, and the bottom where the glue comes out is 0.51mm in diameter. The tip can be cut to adapt to your gluing needs.