Turnigy Servo 5.5g/0.9kg/.10sec

Item found in the following categories;
> Servos & Parts > All Servos
> Servos & Parts > Turnigy Servo
> Servos & Parts > Micro Servo 5-10g

RATED:


	Turnigy Servo 5.5g/0.9kg/.10sec

Micro analog servo.
Precise, jitter free response for small parkflyers or light 3D.

Model: TGY-1550A
Voltage: 6v
Speed: 0.10sec
Torque: 0.9kg/cm
Weight: 5.5g
Size: 21x19.6x20.1mm

PRODUCT ID: TGY-1550A

This product available from a warehouse near you!

Weight (g)	5.5
Torque (kg)	0.9
Speed (Sec/60deg)	0.1
A(mm)	23
B(mm)	22
C(mm)	20
D(mm)	12
E(mm)	30
F(mm)	15

Update/Add my own data
Customer Data

42g

10+

$3.50

acc.

Futaba/JR Connector caps (5pcs/set)
Combo Price: $0.94 BACKORDER

Further discounts available for registered & logged-in customers.

Customer rated

447
crowns

Total of 5 discussions.

André Lopes

12 points - 6/14/2013

which plug this servo?

phil

2 points - 2/8/2013

what is the stall torque for this servo at 4.8 volts it gives it for 6 volts but not 4.8. tower pro sg 50 is rated 10.2 oz/in 0.7 Kg/cm Can replace tower pro sg 50 with this TGY-1550A, it is going in a light flite bug.

JOHN8

25 points - 12/2/2012

Why is this 5.5g servo 42g to ship ?
Other 9g servo only 37g to ship ?
Ok servo for the price. I have 3 planes with these and no problems, also throttle servo on several combat planes.

eli555

16 points - 6/7/2009

the worse servos ever waste of money crashed plane on first testfly it just went up in loops and looped around 4 times so fast then crashed

APylut

48 points

Better look for other causes, I fly them just fine. This is a perfect example of why everyone should do a 'preflight test' of the controls, just like a full size plane before take off. I just ordered a new batch just to have.

buswayne

14 points

I have used many of these with out any problems. Look like pilot confused on take off

S. A.

85 points

yes it will fit Trex 450.

rcwck

273 points -

21x19.6x20.1mm????? this gotta be the wrong size. Almost a perfect cube??!!

rgmanica

139 points

I think that the corect size are 21 x 9.6 x 20.1mm

CARL

290 points

Hello William And Romulo,the measurements of this servo is*21.27mm Long(without mounting lugs) X 11.63mm Wide X 20.02mm High(to top of servo case) or 22.71mm High(inclusive of servo arm post),the lead is 180mm long inclusive of universal plug,thanks.

Customer Reviews

Overall Rating		Raptenium 43 likes
Value	UNRATED
Quality	UNRATED

28 thumbs up!

I purchaed 5 of these servo's and 4 of them were faulty. One did not work at all the other 3 were jamming. As well as that I feel they have too much slop in the gears, hence poor centering. I'm really surprised with my findings cause all the reviews I read were good. I'm sending them all back for a refund.

No comments. Reply..

Overall Rating		Ofenbauer 32 likes
Value	UNRATED
Quality	UNRATED

19 thumbs up!

Von vier bestellten Servos waren drei defekt. Scheinbar keine so sehr gute Qualität.

Three out of four ordered servos were defective. Apparently, not so very good quality.

No comments. Reply..

Overall Rating		corderbo 29 likes
Value	UNRATED
Quality	UNRATED

15 thumbs up!

I purchased 5 of these servos and 3 are dead on arrival. I will trash can them as it cost more to send them back than they cost. I am not impressed with these servos at all.
Bob

No comments. Reply..

Overall Rating		allanQ 30 likes
Value	UNRATED
Quality	UNRATED

14 thumbs up!

i have used 5-6 of these servos before
only 2 are still working today .. another 2 were faulty out of the box .. 2 more went haywire during flight and cost me a crash
not happy with these servos :(

hxt900s are much much much better !!!

No comments. Reply..

Overall Rating		ehud42 38 likes
Value	UNRATED
Quality	UNRATED

14 thumbs up!

Am concerned. Bought 2. One had problems locking onto the signal - this has gone away. Seem to be very weak, and shudder. Are being used for ailerons on a Lanier Fokker D.VII. Might be too weak.

No comments. Reply..

.....click here to see all reviews

Turnigy Servo 5.5g/0.9kg/.10sec

Micro analog servo.Precise, jitter free response for small parkflyers or light 3D.Model: TGY-1550AVoltage: 6vSpeed: 0.10secTorque: 0.9kg/cmWeight: 5.5gSize: 21x19.6x20.1mm PRODUCT ID: TGY-1550A

Futaba/JR Connector caps (5pcs/set)

Micro analog servo.
Precise, jitter free response for small parkflyers or light 3D.

Model: TGY-1550A
Voltage: 6v
Speed: 0.10sec
Torque: 0.9kg/cm
Weight: 5.5g
Size: 21x19.6x20.1mm

PRODUCT ID: TGY-1550A