Please confirm your location:

Arkansas warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the Arkansas warehouse even better value!
  Item found in the following categories;
> Electric Motors > TURNIGY Motors
> Electric Motors > Heli Motors
> Electric Motors > Outrunners by size > 28 to 34mm


Turnigy 450 Series 3800KV Brushless Outrunner Helicopter Motor

Turnigy 450 Series 3800KV Brushless Outrunner Helicopter Motor
Turnigy 450 Series 3800KV Brushless Outrunner Helicopter Motor

Turnigy Heli series outrunner motors are an excellent upgrade for your helicopter. Built with high quality components, tight windings and genuine NMB ball bearings, these motors provide excellent performance and efficiency at a price that can't be beat!

These motors are a perfect fit for any of the HK450 series helicopters.

Operating Voltage: 7.4~14.8V (2~4S lipoly)
RPM: 3800kv
Max Current: 35A
Max Power: 365W
Idle Current: 3.5A
Resistance: 0.018ohms
Shaft: 3.175mm
Connector: 3.5mm bullet
Bolt Hole Spacing: 16mm
Weight: 80g

PRODUCT ID: 9155000135

Kv(rpm/v) 3800
Weight (g) 80
Max Current(A) 35
Resistance(mh) 0
Max Voltage(V) 15
Power(W) 365
Shaft A (mm) 3.175
Length B (mm) 34
Diameter C (mm) 29
Can Length (mm) 27
Total Length E (mm) 50
Update/Add my own data
Customer Data

Shipped from:
International Warehouse



  • HobbyKing 40A BlueSeries Brushless Speed Controller

    Combo Price: $18.81   IN STOCK
    Add to Cart

Further discounts available for registered & logged-in customers.
 Customer rated
Total of 11 discussions.
Eric  2 points - 10/10/2015
How many poles has this motor? The ESC must be on 12khz or 24khz? Thanks
nghia  1 points - 7/30/2015
can it work with a 5 *5 prop ?
kelkarsir  11 points - 7/15/2014
......................Faqcya................ this motor is designed for 450 size helis, use it with pinion of 11/12 teeth,,,,,,lesser pinion more rpm is Recommended for beginners......go for it
faqcya  8 points - 6/7/2014
will this work on a blade 450x. If so what tooth pinion do I need.
kelkarsir  11 points - 3/18/2014
basically this motor is for 450 size heli wich weighs about 600 grams, for ur 1.5 kg heli you need low kv motor wich can give u lots of torque results into high thrust...........
Customer Reviews
Create an account
Overall Rating

Like it?
montagem de Helicopteros eletricos, rapido seguro e barato, valeu hobbyking, sempre fazendo a galera feliz... valeu

No comments. Reply..

Overall Rating
Like it?
Bad body Balancing, bad sound when rotated by hand, not enough power but consume more amps. but looks good shape with horizontal line, come with complete connectors and screw, good cooling, come with NMB Bearing (Not too sure) for me, enough buy 2 units and will not buy again. will test on 4S with 10T pinion and see the power

No comments. Reply..

Create an account
Overall Rating
Like it?
Decent motor. Spins a little rough compared to an Align, but for the price this is pretty good. I've used the 250 and 450 Assault motors and they are good enough for the casual flyer. No added vibrations and no shaft play.

No comments. Reply.. here to see all reviews
Aff. Link