Please confirm your location:


Arkansas warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the Arkansas warehouse even better value!
  Item found in the following categories;
> Hardware & Accessories > Propellers > GWS Style Propellers (Electric)
> Hardware & Accessories > Propellers > All 3 Blade Props (Gas/Electric)
> Hardware & Accessories > Propellers > All 2 Blade Props (Gas/Electric) > 4" to 5" Inch Propellers
> Multi-Rotors, Drones & Parts > Propellers > 5 inches
> Multi-Rotors, Drones & Parts > FPV Racing Drones > Propellers > 3 Blade Props

  RATED:

Hobbyking™ 3-blade Propeller 5x3 Black (CCW) (3pcs)

Hobbyking™ 3-blade Propeller 5x3 Black (CCW) (3pcs)

5030 (black) Three Blade Propeller (ABS) Counterclockwise Rotation



PRODUCT ID: 9329000073

Length (Inch [X]) 5
Pitch (Inch [Y]) 3
Update/Add my own data
Customer Data

Shipped from:
International Warehouse

Price

$2.42

Related Products
Customer Also Bought
Further discounts available for registered & logged-in customers.
 Customer rated
424
crowns
  
 
Total of 16 discussions.
catta  22 points - 7/21/2016
 
One of the worst products I've ever seen... paper thin, pathetically flexible! Just *******!
Ayush  1 points - 5/19/2015
 
I want around 500grams of thrust. So with which motor can i use these propellers.I mean the kv ratings. Waiting for an early reply. :)
 v_max 5601 points
With this 3 blade props, assuming 3S battery Turnigy Multistar 1704-1900Kv 12 Pole Multi-Rotor Outrunner V2 is perfect for 600gramm quad.
 v_max 5601 points
Turnigy Multistar 1704-1900 Thrust test * 3 Cell **po (~12v)
5x3 GF: 235 grams * 54 watt
5x3 Triblade: 235 grams * 55 watt (THIS PROPPELERS)
5x4.5 Triblade: 250 grams * 82 watt*
5x4 GF: 250 grams * 64 watt
4x25: 125 grams * 31 watt
6x3 GF: 300 grams * 75 watt*
 v_max 5601 points
Note also... if you have 500gr quad you need at least 800g trust at max power for good maneuvrabi**ty Better around 1000 - 1200g.
Jake  1 points - 3/29/2015
 
****
RonRC  4425 points - 12/11/2014
 
these 3 blade props can be balanced better and easier than two blade. very important for small multi rotors.
Trevor  1 points - 12/3/2014
 
Am i right in thinking you just turn the blades 180 degrees and they become cw or ccw?
 Hugo 11 points
no, that is not the case.
 Jeroen 58 points
That's never the case, if you turn the prop 180 degrees the prop stays the same, but not as efficient annymore. buy cw and ccw props. same in pusher props
Customer Reviews
Create an account
Overall Rating
Blade Boy
81 likes
Value
Quality
Like it?
pefect little blades and I recomend them. They seem to be balanced right out of the package. you will need a prop holder you can't put them on a prop saver.


No comments. Reply..

Create an account
Overall Rating
Blue Angel
1374 likes
Value
Quality
Like it?
These propellers are from Gemfan.
including prop. adapters for different shafts

weight: 1,5g
max. hole: 4,95mm
thickness: 6mm


3 comments. Reply..

Create an account
Overall Rating
18turbo
200 likes
Value
Quality
Like it?
good props for a micro, a bit high draw for 1811-2000kv on 3s but they have worked fine


3 comments. Reply..

Create an account
Overall Rating
Twimnox
18 likes
Value
Quality
Like it?
perfectly balanced props. I'm using them on my 2000kv C20 brushless motor, maybe a little too much for running it on a 3s. I'll try 'em on a quadcopter.


No comments. Reply..

Create an account
Overall Rating
robbo02
3 likes
Value
Quality
Like it?
not very very well prop ... it's good for micro quad but not good for a serius project


No comments. Reply..

.....click here to see all reviews
Aff. Link