Please confirm your location:

USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Cars & Parts > Car Radios > Transmitters
> Radios & Receivers > Car Radio > Transmitters


Turnigy GTX3 AFHDS 2.4ghz 3 Channel Radio System

Turnigy GTX3 AFHDS 2.4ghz 3 Channel Radio System
Turnigy GTX3 AFHDS 2.4ghz 3 Channel Radio System

 The much-anticipated and exclusive Turnigy GTX3 AFHDS 2.4ghz 3 Channel radio system is here! This great looking Transmitter uses proven channel hopping technology to provide a solid, reliable link for RC Cars & Boats.

The Turnigy GTX3 features a large Back-lit LCD, A quick access jog wheel for function selection and programming, 10 Model memory, Steering wheel extension as standard, a host of programming features and compatibility with the already proven HK-GT2R 3 Channel receiver. The GTX3 can also connect with the free to download VRC Race Simulator when used with the optional USB cable (not included, see related items below). The combination of great features and solid reliability means the Turnigy GTX3 could very well be the last radio you will ever need!

RF Type: 2.4Ghz  AFHDS
Bandwidth: 500Hz
RF power: less than 20DB
Sensitivity: 1024
Low Voltage Warning: Yes (less than 9V)
Fail Safe: Yes
DSC Port: Yes (3.5mm PPM)
Charging Port: Yes
Power: 12V DC (1.5AA x 8)
Weight: 395g
CE & FCC certified
3.9" Blue Back-lit LCD

Programing Options:
Model Memory (10 Models)
Servos NOR/REV
Steering Trim
Throttle Trim
Dual Rate
End Point Adjustment
ABS Settings
EXP Settings

Turnigy GTX3 Transmitter
Turnigy GTX3R 3 Channel receiver
RX Antenna Tube
Bind Plug
User Manual


PRODUCT ID: 9114000003

This product available from a warehouse near you!

Weight: 800g Quantity: 
International Warehouse
USA West Warehouse In Stock View Item
Price $38.86

  • USB Simulator Lead for Turnigy GTX3 Transmitter - VRC Sim Compatible

    Combo Price: $4.95   IN STOCK

  • Turnigy AA LSD 2400mAh Low Self Discharge (ready to use)

    Combo Price: $1.55   IN STOCK

  • HobbyKing® ™ GT-2 2.4Ghz Receiver 3Ch

    Combo Price: $5.96   IN STOCK

Further discounts available for registered & logged-in customers.
 Customer rated
Total of 480 discussions.
Ross  29 points - 9/18/2014
What is wrong with my ESC/Radio? I am running a 2 cell 2200 mah nano tech. A 3000 KV HK outrunner. Two turnigy 9 gram metal geared servos The radio system is turnigy GTX3. I have the throttle on reverse setting and hold it hard forward to stop the motor. Why can I not have the trigger at its center position where is belongs? The ESC is programmed with a soft braking system. I find that it works on my HK-T4A V2 transmittor. Does any one know what I need to change? Cheers
Jonas  3 points - 9/16/2014
Does this have a 3 position switch?
G2loq  392 points - 9/4/2014
How can I remove the fail safe on this as it is not safe at all ! If by mistake you shut down your transmitter or you go out of range, the motor start a 100% forward during 30 seconds. It happened to me with a boat today.....
 G2loq 392 points
Ok, I find out the explanation in the manual. Programming of the integrated FailSafe unit. 1. Function Description The built-in FailSafe unit is mainly for the use on boats and cars. It is used to prevent loss of the model in case of signal loss and returns the servo to the position which was set before. 2. Setting a. Turn on the transmitter b. Turn on the receiver. The signal LED will flash continuously and indicates that the receiver is ready. c. Move the throttle lever on the transmitter in the braking or outlet position. Hold the throttle lever in this position. d. Press the Setup button on the receiver. The signal LED flashes for 3 seconds (see left). e. The setting is saved and you can bring back the throttle into neutral position. 3. Testing the settings a. Turn on the transmitter. b. Turn on the receiver. c. Turn off the transmitter. d. The receiver will now lose the signal and drives the servo or the speed control on the gas channel to the previously programmed position. e. If these steps work, you have set the FailSafe.
Christian  8 points - 9/4/2014
I'm considering buying this but i'm wondering if anyone has tried putting lipo in it? The reason is that i hate having to put 8 AA batteries inside a remote. thanks
 G2loq 392 points
Yes the PRODUCT ID: T1450-TX-3 fit perfectly ! I already have 2 *) The T1450TX-3 lipo pack is an excellent replacement in radio's which used 8 x AA cells in flat formation, such as many Futaba or Sanwa models.
Akexander  2811 points - 8/29/2014
Quick unboxing
 G2loq 392 points
This is just the 6th time this guy post the same video on this discussion and I still do not understand what he is saying *)
 Dolfie 45 points
Sounds like Russian
Customer Reviews
Overall Rating
1 thumbs up!
I bought that Transmitter and it is pretty good! BUT! Where is the delay for Steering and missing parts from the the first Version GTX3 from Fly Sky??? That GTX3 - HERE - is the Version GTX3B. Also is a NEW Version on the market called GTX3C !!! But the problem is also that the DSC connector from that Turnigy version does not LONGER work. The old version GTX3 works from Fly Sky. I sell it in the hope to get a better one with new releases and more features. What I get is a half version of the GTX3 from Fly Sky which does not work with simulator now! So again Turnigy - what do you think how long you can do that with your customers! I am very depressed.

1 comment. Reply..

Overall Rating
1 thumbs up!
Nice RX!
There are so much buttons! That is why it's a little bit hard to understand how to use them.
But it is so cheap and it works great!
Also it is compatible with hobbyking (HK) and turnigy (X9) receivers.
I give "A " for it!

4 comments. Reply..

Overall Rating
Like it?
The feel of the tx is quite nice, better then i expected. The selection wheel/button feels very cheap. (but it was $36.00 which is cheap) I binds fine with GT2 rx's. The screen looks really nice, backlight is bright, and it is very easy to read. This is my first programable tx, so I can not compare it. 2 things I was disappointed in is the limited 3 character model naming, and the fact that the "10 models" is nothing more then saved pre sets. If you are on model #3, it will still pair to any rx it has been bound with. So if you have a rescue boat, it can not use this tx along with whatever boat you just got stuck. overall I am very satisfied with the tx.

5 comments. Reply..

Overall Rating
Like it?
Très bonne radio.toujours super fiable.portée a perte de vue.
qualité prix toujours le top du top .
merci hobby

2 comments. Reply..

Create an account
Overall Rating
Like it?
O rádio tem um acabamento bonito e é muito funcional estou usando ele no meu fazer 1/10.

6 comments. Reply.. here to see all reviews
Aff. Link