H-king High Performance Racer Series

Location: UNITED STATES

TOTAL $0.00 QTY 0

Planes & Parts

Helicopters & Parts

Multi-Rotors & Parts

Cars & Parts

Boats & Parts

Bikes & Parts

Scale R/C Tanks

FPV & Telemetry

Batteries & Accessories

Chargers & Accessories

Electric Motors

Speed Controllers

Robotics & DIY

Servos & Parts

Radios & Receivers

Gas/Glow Engines & parts

UBEC & Regulator

Power Systems

Hardware & accessories.

Tools

Clothing, Gift & Acc.

Sale/Liquidation


Language
Currency

	USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!

Item found in the following categories;
> Planes & Parts > All Models
> Planes & Parts > Sport, Aerobatic & 3D

RATED:


	H-king High Performance Racer Series - MXSR Kit w/Servo

H-king High Performance Racer Series - MXSR Kit w/Servo

The unique and quite brilliant Hobbyking Racer series has been developed with two things in mind....high performance and massive amounts of fun!

The good looking airframe is made from super tough EPO foam and is heavily re-inforced with CF rods, each version is nicely finished in an authentic color scheme. One of the first things you notice with this series is the nicely designed modular construction, the wings and horizontal stabilizer literally snap together making assembly and parts replacement simple and fast. No glue is required for assembly, the vertical stabilizer and tough under-carriage simply screw on and the servo's have been pre-installed. When you look around these brilliant models, you can see that they have been built for performance, both in terms of speed and aerobatic capability, the control surfaces are all fully hinged and the wing/empenage mount are heavy duty to cope with High G maneuvers. This great priced ARF version allows you to use the power train of your choice, offering huge potential for all you speed freaks!

Features:
Tough EPO Construction
Nicely Finished, Authentic Scale Scheme
High Performance Model, both Fast and Aerobatic
Fast and Simple to Assemble Courtesy of Modular Design
All Servo's Pre-Installed
Fully Hinged Control Surfaces
ARF version is Perfect for Those Wanting to Build an Ultra High Performance Version
Extensive use Of CF Rods in all Flying Surfaces and Fuselage
Heavy Duty Undercarriage with Rubber Tyres capable of handling the roughest of strips
Can be Hand Launched

Includes:
Instructions
Tools
Hook & Loop Tape
Y-Lead
Spinner
7x6 Prop

Specs:
Wingspan: 800mm
Length: 720mm
Flying Weight: 640g
Wing Area: 10.5dm2
Servo: 9g x 4

Requires:
Your own 4 Channel TX/RX
1800mAh 4s Lipoly
28mm Brushless Outrunner 4s Capable
30A~40A ESC w/BEC

PRODUCT ID: 9087000006

This product available from a warehouse near you!



2 1:IC/2:Elec	4 Channel	800mm (31.50in)	720mm (28.35in)	640g (1.408lb)

1558g

4

$55.00

esc

Turnigy AE-45A Brushless ESC
Combo Price: $20.42 IN STOCK
H-KING 35A Fixed Wing Brushless Speed Controller
Combo Price: $12.86 IN STOCK
HobbyKing 40A BlueSeries Brushless Speed Controller
Combo Price: $17.30 IN STOCK

motor

battery

acc.

Further discounts available for registered & logged-in customers.

Customer rated

4 crowns

Total of 7 discussions.

Wanderlei

1 points - 5/19/2013

Por favor, Algué*m já* comprou direto da hobbyking atravé*s do Paypall? o produto chega mesmo e as taxas na alfandega? att Wanderlei.

Peter

3 points - 4/2/2013

I put a Nano-Tech 3S 2200 and it is still WAY tail heavy. The motor is a Turnigy 2836 2200kv. and I put a 6x4 prop on it. Anyone else witness this thing's hunger for nose weight?

Peter

3 points

...it took 40g (8 US nickels) placed as far forward as possible to balance on CG.

Bugsmasher

72 points

I have basically the same set up as you and mine seems balanced. I have a solid aluminum spinner and a 6 inch prop on it. I have the esc as far forward as possible. I still haven't flown mine yet but the balance seems good.

OzBlueDragon

37 points

Peter I've run a 1600mAh NanoTech in mine and it was perfectly balanced. Flew like a scolded cat too! Have you flown yours yet?

Peter

3 points - 2/28/2013

I am a "pretty good" beginner. If you tame the throws, is this thing "easy" enough to fly? How slow will it fly? How susceptible to wind? How are the stall characteristics? Anyone try using "flaperons" to slow it down for landing?

Bugsmasher

72 points

I built mine but I haven't flown it yet. With tame throws I don't expect it to be too difficult. I set mine up with flaperons. The servos wires were long enough I didn't even need to put extensions on them. If you have the extra channel I would recommend it.

Peter

3 points

cool, thanks for the response. Let us know how she flies.

OzBlueDragon

37 points

This is an advanced pilot's plane only mate. Not for even a good beginner. It's super twitchy and likes speed not slow flying. I would recommend trying a T28 Trojan warbird for a good low wing starter or even the DuraFly Monocoupe for a sports high wing. Better you get some air time and practice rather than crash my friend. Hope this helps *)

Shaun

1 points - 10/8/2012

What motor for some great speed you recommend guys using 3 and 4s batts thanks

Gary

2995 points

You could try the Turnigy Park 480-1320 with a 3 cell pack or possibly the Turnigy D2836-9-950 with a 4cell pack.

OzBlueDragon

37 points

Shaun this thing is fast out of the box! No need for a motor change just run a 4cell Li-Po!

fernanbs

11 points - 6/30/2012

what about this model with 3s batteries??

sfactor1

947 points

it will still give unlimited vertical on 3s!

carl

1 points - 6/26/2012

What *PRODUCT ID I'd that??

thomas

13 points

carl the product id is 9087000006

carl

1 points

Hi I ment what is the product Id is it for the motor mount, so I can buy. That what I need to fly this plane. But thank you

thomas

13 points

carl here go to this link www.link

carl

1 points - 6/25/2012

What motor mount do I get for this plane??

justice

579 points

carl,stand offs like the type gas engines use are best,just measure the distance you need and order your stand offs to suit,sometimes you cant get the exact size you need, so get the ones closest you need,(usally shorter)and pack with washers till desired distance is reached.

H-KING_SCOTT

5161 points

Motor mount is a standard firewall type ready to accept an X-Mount motor.

Customer Reviews

Overall Rating		3/2/2013 Bugsmasher 64 likes
Value
Quality

Like it?

I just finished building my MSX-R. My set up is a 2200mah 3S Nano-Tech battery, a NTM Prop Drive 28-36 2200KV / 696W motor, and a HobbyKing 40A BlueSeries ESC. I used the stock prop which may be a bit too much for it but I really can't see having wide open throttle for more than 2-3 seconds at at time. Some people say it needs a 4S battery but with my 3S set up the power is incredible. I haven't flown it yet but I think once I have a feel for the plane I will be able to hand launch it vertically with the power it has. I bought the MSX-R over the Edge and S-Bach because I liked the look of it and it was cheaper and had a slightly lighter shipping weight. As for assembly, it all snapped/screwed together in just a few minutes. I'm not sure I like the joining of wing to the fuselage though. It has two screws at the front of the wing but only one at the rear. It's probably strong enough but I did have thoughts of the wing separating from the fuselage during high negative G's. The motor fit perfectly on the firewall mount with the NTM accessory pack and no modifications were needed. I used the spinner with the accessory pack rather than the plastic one that came with it and the prop lined up perfectly with the front of the cowl. My plane came in at 730 grams which is about 90 grams heavier than advertised. I think the wing loading is a bit high but I've more than made up

No comments. Reply..

Overall Rating		3/2/2013 Bugsmasher 64 likes
Value
Quality

Like it?

for it with power. I would have preferred it came without servos so I could have installed my own but all it all I'm pleased with it. I'll post a flight reviewed eventually.

No comments. Reply..

.....click here to see all reviews

Aff. Link

Home Account News Careers Sponsorship Map RSS Contact

H-king High Performance Racer Series - MXSR Kit w/Servo

Turnigy AE-45A Brushless ESC

H-KING 35A Fixed Wing Brushless Speed Controller

HobbyKing 40A BlueSeries Brushless Speed Controller

Turnigy2836 brushless Outrunner 1200kv

NTM Prop Drive 28-36 1800KV / 438W

NTM Prop Drive 28 Series Accessory Pack

Turnigy nano-tech 1800mah 4S 25~50C Lipo Pack

Turnigy 1800mAh 4S 40C Lipo Pack

Turnigy 1800mAh 4S 30C Lipo Pack

ZIPPY Flightmax 1800mAh 4S1P 40C

Turnigy nano-tech 1800mah 4S 65~130C Lipo Pack

H-king Racer MXSR 800mm - Replacement Rudder

H-king Racer MXSR 800mm - Replacement Fuselage

OrangeRx R620 Spektrum/JR DSM2 Compatible Full Range 6Ch 2.4Ghz Receiver w/Failsafe

Turnigy 9X 2.4GHz 8Ch Receiver (V2)

H-king Racer MXSR 800mm - Replacement Elevator

H-king Racer MXSR 800mm - Replacement Main wing Set

H-King Racer MXSR 800mm - Replacement Landing Gear

H-King Racer MXSR 800mm - Replacement Spinner

OrangeRx R615 Spektrum/JR DSM2 Compatible 6Ch 2.4Ghz Receiver

OrangeRx Futaba FASST Compatible 8Ch 2.4Ghz Receiver

TGS Sport 7x6E Precision propeller

H-king Racer MXSR 800mm - Replacement Canopy