Please confirm your location:


USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Batteries & Accessories > Li-Poly (All brands)
> Batteries & Accessories > 25C Discharge
> Batteries & Accessories > Turnigy nano-tech

  RATED:

Turnigy nano-tech 4500mah 3S 25~50C Lipo Pack

Turnigy nano-tech 4500mah 3S 25~50C Lipo Pack

More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo  nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots! Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!Spec.Capacity: 4500mAhVoltage: 3S1P / 3 Cell / 11.1VDischarge: 25C Constant / 50C BurstWeight: 361g (including wire, plug & case)Dimensions: 169x49x23mmBalance Plug: JST-XHDischarge Plug: 4mm bullet-connector  *The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. 1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.Advantages over traditional Lipo batteries.Power density reaches 7.5 kw/kg.Less Voltage sag during high rate discharge, giving more power under load.Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.Greater thermal control, pack usually doesnt exceed 60degCThickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load.Higher capacity during heavy discharge. More than 90% at 100% C rate.Fast charge capable, up to 15C on some batteries.Longer Cycle Life, almost double that of standard lipoly technology.



PRODUCT ID: N4500.3S.25

This product available from a warehouse near you!

Capacity(mAh) 4500
Config (s) 3
Discharge (c) 25
Weight (g) 361
Max Charge Rate (C) 5
Length-A(mm) 169
Height-B(mm) 49
Width-C(mm) 23
Update/Add my own data
Customer Data

Weight: 459g Quantity: 
International Warehouse
stock
10+
USA West Warehouse In Stock View Item
USA East Warehouse In Stock View Item
Price $32.55

Related Products
Customer Also Bought
Further discounts available for registered & logged-in customers.
 Customer rated
525
crowns
  
 
Total of 32 discussions.
Anwar  1 points - 9/24/2014
 
How much flight time I can expect with DJI F 450, E300 Naza V2 GPS, FPV transmitter 1300 AW Nano tech 3S 4500 (suppose to install)
srgpgda  16 points - 5/16/2014
 
what is the regular internal resistance level of this battery fully charged and balanced? my battery is reading 4 ohms, just wanted to know so ik if my battery is good or bad
Jurgen  4 points - 2/2/2014
 
How much flight time could I get using this battery on: ATG-H4-650mm-Alien-FP V-Folding-Aircraft-Quadcopter- Frame-Carbon-Fiber co
mbined
with Tiger T-Motor MN4014-11 330KV Brushless Motor and MayTech DJI 15x5.5 Standard & Reverse Carbon Props? Normally I would use the Turnigy Plush 60amp Speed Controller and a GoPro mount for aerial filming. I would really appreciate some help.
Jurgen  4 points - 2/2/2014
 
How much flight time could I get using this battery on: ***********aliexpress****/item/ATG-H4-650mm-Alien-FP
V-Folding-Aircraft-Quadcopter-Frame-Carbon-Fiber-Lan
ding-Skid-Gear/1608623603.html Combined
with: Tiger T-Motor MN4014-11 330KV Brushless Motor and MayTech DJI 15x5.5 Standard & Reverse Carbon Props?
.tornado  2 points - 1/15/2014
 
****
Customer Reviews
Create an account
Overall Rating
Lucastomio
140 likes
ValueUNRATED
QualityUNRATED
Like it?
Awesome, 25-35min with my epp fpv


No comments. Reply..

Create an account
Overall Rating

40 likes
ValueUNRATED
QualityUNRATED
Like it?
I use a pair of these in series as a 6S pack on my FlyFly F86 Sabre.
I also use "standard" (the blue ones) Turnigy 4000 lipos on this plane.
Nano-tech RI is 2 milliohms vs 3 for the standard ones.
When not in a rush, I usually charge them at 1C in sync mode with a Hyperion EOS Duo charger. But they can take higher charge rate without problem.
Dimensions and weight are similar.
Turnigy nano-tech 3S 4500 (25-50C)= 151x49mm - 343g
Turnigy 3S 4000 (30-40C) = 146x50mm - 341g
But the nano-tech offers 500maH more capacity. So the capacity/weight ratio is obviously better.
The F86 with its Wemotec fan draws about 68 amps on the bench. Under load the nano-tech keeps higher voltage, as I could hear from the screaming sound of the fan. Top speed is clearly faster. A guy arrived last morning at the club and he thought I was flying a real jet :)
So far, I'm happy with these packs. I hope they will deliver similar performance after a few more cycles.


No comments. Reply..

Overall Rating
jomatrar
6 likes
ValueUNRATED
QualityUNRATED
Like it?
llegó a tiempo, excelente presentación, mejor el tamaño y su peso es increiblemente liviano para la capacidad que presenta.


No comments. Reply..

Create an account
Overall Rating
zeeek1
435 likes
ValueUNRATED
QualityUNRATED
Like it?
As always received in perfect balance. I would prefer 5.5mm bullets than the standard 4mm plugs... After all these are much higher O/P right!!??


No comments. Reply..

Overall Rating
Psyho
119 likes
ValueUNRATED
QualityUNRATED
Like it?
Hello, i use this lipo in my e-revo brushless with leopard 4074 motor, 16t pinion, this is a wery powerful. but size is not 169mm at about 150mm Thanks


No comments. Reply..

.....click here to see all reviews
Aff. Link