Please confirm your location:

Arkansas warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the Arkansas warehouse even better value!
  Item found in the following categories;
> Servos & Parts > All Servos
> Servos & Parts > Turnigy Servo
> Servos & Parts > Mini Servo 11-20g


Turnigy™ TGY-375DMG w/ Heat Sink DS/MG 2.3kg / 0.11sec / 11.5g

Turnigy™ TGY-375DMG w/ Heat Sink DS/MG 2.3kg / 0.11sec / 11.5g
Turnigy™ TGY-375DMG w/ Heat Sink DS/MG 2.3kg / 0.11sec / 11.5g

TGY-375DMG Metal gear Digital Servo w/ Heat Sink 2.3kg / 0.11sec / 11.5g

Weight: 11.4 grams / 0.44 oz.
Dimensions: 24.5 x 11.5 x 23 mm / 0.99 x 0.46 x 0.91 inch
Torque @ 4.8V: 1.6 kg/cm , 22 oz/in
Torque @ 6.0V: 2.3 kg/cm , 28 oz/in
Speed @ 4.8V: 0.13 sec / 60° at no load
Speed @ 6.0V: 0.11 sec / 60° at no load
Gear: Metal gear / ball bearing             


Weight (g) 24.5
Torque (kg) 2.3
Speed(Sec/60deg) 0.11
A(mm) 30
B(mm) 23
C(mm) 26
D(mm) 12
E(mm) 32
F(mm) 15
Update/Add my own data
Customer Data

Shipped from:
International Warehouse



  • Futaba/JR Connector caps (5pcs/set)

    Combo Price: $1.00   IN STOCK
    Add to Cart

Further discounts available for registered & logged-in customers.
 Customer rated
Total of 20 discussions.
Tony gliders  1 points - 3/13/2016
Size of Servos. I have a new electric plane, weighs 2.2 kg, that recommends 4 servos that are 28 x 12.7 x 27.4. How do I find such servos? Thanks, Tony.
Christopher  8 points - 10/12/2013
didn't work out of the package. they don't pay to ship it back and only give you 80 percent back of purchase price. I'll start a business like that, sell broke things and then when I get it back give them 80 percent of their money back and then resell it to the next guy. Casinos don't even make that much of their customers.
 NORA- 38 points
need a partner ?
srgpgda  16 points - 10/11/2013
this servo broke the first day on my tri... the problem is that it has 1 plastic gear and the rest metal... get a spektrum or savox servos that have all metal gears... and they are great servos
 Partha 1 points
Did you find a replacement metal gear for this servo?
Arnon  5 points - 7/5/2013
My servo is broken!
 humbertomelo 394 points
what is broken? arm, gears, wire, case, all alternatives?
 Arnon 5 points
Motor of servo..
Paul  23 points - 5/23/2013
Don't get this servo, burnt up before my copter even had props on it
 AllenLin 1097 points
I got same problem too, what's really going on with Blue Bird QC works?? no QC??
Customer Reviews
Overall Rating
Like it?
Hi I'm an Italian modeler and OT enthusiast, I'm serchin' for a real "precision servo" in tiny package...
and this little beast seems to fit the bill ! A so nice and accurate looking usually means robust construction and top performance..I've ordered two just to test ) this is a tread I've opened in RC Group ..some interesting pics and video...all hardware come from HC/HK...)
Ciao, Luca

1 comment. Reply..

Overall Rating
mes helico
Like it?
Ces petits servo sont exceptionnel,rapide, prcis,trs bien pour un 450 . Pour les pilotes qui commence la voltige ou un 3D soft !!! Trs bon rapport qualit prix merci H-K !!!

1 comment. Reply..

Overall Rating
Like it?
I bought 5 of these servos for an EPP plane (Ursus). One is faulty. As it happened it was the first one I tried on my Turnigy servo tester just to see what they were like. It was stopping about at 2/3 of it travel and then would return back again while using the auto sweep test on the tester. It was getting hot while operating for 30 seconds. I tested the current. It rose from 250ma to 1,000ma when stopped/jammed. I opened it up and have diagnosed that there is something wrong with the output gear or the other gear that is shared on the output shaft. If the case is left slightly loose it will work. But, hey, I am not trusting it for use. I will look into warranty???

No comments. Reply..

Create an account
Overall Rating
Like it?
out of this world servo
amazing build qualty extreamly sturdy contruction

and so so smooth to operate

i would highly recomend as these are also made in Taiwan and as far as servos go thats wer u want them coming from.

buy it dont worry and if u dont like it after wards i live in ireland and i will be HAPPY to take them of you

No comments. Reply..

Overall Rating
Like it?
i got it today, 3 pcs and used a servo tester to check! all servo are good, its alittle heavier than similar size servos...
one thing after testing it awhile, zigzag method on the servo tester, it became alittle warm, it must be the heatsink!
its alittle noisy coz of metal gears, have seen glitches yet, good centering... i do another followup review when i have installed it!
one thing it ferfect on HK450gt pro cyclic! fits perfect!

1 comment. Reply.. here to see all reviews
Aff. Link