Item found in the following categories;
> FPV, Aerial Video & Telemetry > FPV & Accessories > Goggles
> FPV, Aerial Video & Telemetry > FPV & Accessories > LCD Screen
> FPV, Aerial Video & Telemetry > FPV & Accessories > Quanum

  RATED:

Quanum DIY FPV Goggle Set with Monitor (KIT)

Quanum DIY FPV Goggle Set with Monitor (KIT)
Quanum DIY FPV Goggle Set with Monitor (KIT)

Quanum is bringing FPV to the masses with the DIY FPV Goggle kit! It’s time you start flying RC with a birds eye view and a sense of flight. Until now, an immersive FPV experience through goggles was out of reach for some. No longer is a cost a barrier between you and the blue sky above.

The Quanum FPV goggle kit is based around a custom built 4.3in NON-blue screen monitor, providing a clear, bright, non blue image in even the worst of conditions. It contains a custom Fresnel lens, making the monitor crystal clear with a minimal viewing distance.  An ergonomic housing was custom molded to house the monitor and the lens, with adaptability to cater to various face types. The molded housing is made from EPP foam allowing you to carve and adjust the fit just right to your face and finishing it off with foam strips for a light tight seal. The goggles come with adjustable securing side straps and provisions for even a top strap. The top housing has a molded curved top for the option of attaching the goggle to the brim of your favorite ball cap for an even more custom DIY fit.

The monitor uses the common RCA style video in connections for video and audio, and has an included mini JST power adapter as well. The goggles can be switched between 16:9 or 4:3 aspect ratios and comes with 3 lenses included to find the most comfortable FPV viewing experience for you. 

With the Quanum DIY google’s large screen and broad immersive viewing angle, some will even prefer the view to other FPV options. The DIY kit is perfect to get into FPV or if you’re a seasoned FPV pilot who wants to give a bigger screen a try for a new feel in the sky. You could even use them as back up goggles or ride along goggles for spectators!

*Check out the build video by clicking here*

Specs:
Monitor screen: NON-Blue screen custom TFT LCD
Screen size: 4.3in (16:9 or 4:3 switchable)
Format: PAL/NTSC supported
Supply voltage: 7~13V
Resolution: 480px (w)
Fresnel lens: 3X and 4X included
Size: 140x95x120mm
Weight: 195g

*Note: This is the viewing goggles only, and needs to be paired with your favorite Video receiver, transmitter and camera for the full FPV experience.



PRODUCT ID: 9171000444-0

Shipped from:
International Warehouse

Price

$29.99

battery
  • Fatshark FPV - Headset Battery 7.4V 1000mah w/Banana Charge Lead

    Combo Price: $17.96   IN STOCK
    Add to Cart

  • Quanum FPV Headset Battery 7.4V 1500mAh 3C

    Combo Price: $8.95   IN STOCK
    Add to Cart



acc.
  • HobbyKing X-1000 Advanced Head-Movement-Tracker Gyro

    Combo Price: $47.93   IN STOCK
    Add to Cart

  • LawMate RX-1260 1.2GHz 8Ch Wireless A/V Receiver

    Combo Price: $34.15   BACKORDER
    Add to Cart

  • 2.1mm - 5.5mm DC Plug Jack (2pc)

    Combo Price: $0.25   IN STOCK
    Add to Cart

  • Battery Powered Hot Glue Gun

    Combo Price: $2.95   BACKORDER
    Add to Cart

  • RCA Male to RCA Male A/V Coupler Adaptor (3pc)

    Combo Price: $0.50   IN STOCK
    Add to Cart

  • Foam-Cure EPP and EPO Foam Glue 1 oz.

    Combo Price: $2.34   IN STOCK
    Add to Cart

  • SkyZone 5.8Ghz 200mw FPV Wireless AV Tx & Rx Set

    Combo Price: $49.91   IN STOCK
    Add to Cart

  • X-Gyro 500 Single Axis Head Tracking system.

    Combo Price: $35.88   IN STOCK
    Add to Cart

  • Skyzone Plug & Play FPV 200-Set With TS5823 TX, RC832 RX, Sony CCD and Circular Polarized Antennas

    Combo Price: $64.95   IN STOCK
    Add to Cart

  • Skyzone Plug & Play FPV 500-Set With TS58500 TX, RC832 RX, Sony 700CCD and C/P Antennas

    Combo Price: $89.95   IN STOCK
    Add to Cart

  • Quanum DIY FPV Goggle Set with Monitor (KIT)

    Combo Price: $29.95   IN STOCK
    Add to Cart

  • FatShark 250mW V3 5.8GHz Video Transmitter With NexwaveRF

    Combo Price: $54.95   IN STOCK
    Add to Cart

  • ImmersionRC 5.8GHz 25mW Video Transmitter A CE Certified NexwaveRF Powered Video Link (Fatshark)

    Combo Price: $48.96   IN STOCK
    Add to Cart

  • ImmersionRC 5.8Ghz Audio/Video Transmitter - FatShark compatible (600mw)

    Combo Price: $59.91   IN STOCK
    Add to Cart

  • Quanum DIY FPV Goggle V2 w/5 inch LCD Monitor (Kit)

    Combo Price: $51.98   IN STOCK
    Add to Cart



Further discounts available for registered & logged-in customers.
 Customer rated
5110
crowns
  
 
Total of 358 discussions.
Doug  8 points - 1/12/2016
 
https://www.youtube.com/watch?v=zshvRs-Aw6Q <-- Used these goggles with the quanum no drift head tracker and a turnigy 9x for an inexpensive head tracking pan/tilt system. paired it to a dragonlink for long range. Easy and inexpensive!
Doug  1 points - 1/11/2016
 
*******youtu.be/zshvRs-Aw6Q
Doug  1 points - 1/11/2016
 
I combined this with the quanum open source headtracker, a turnigy 9x, and a dragonlink for a long range pan/tilt setup and it works great!
Doug  8 points - 1/8/2016
 
these are great. they work well, are comfortable and customizable, and can easily take the quanum headtracker unit to add to your experience. you can also connect them to any video receiver. I used them recently on this 9 mile flight with my hobbyking Sky eye.
Nick  1 points - 12/31/2015
 
So is this all you need and you can have a FPV System? Or do you need a special transmitter/camera?
 Bernie 4 points
You will also need an FPV receiver and lipo to power goggles and receiver, then on the vehicle(quad or plane) fpv camera,transmitter, andOSD if you want your flight information overlayed on the screen.
 Nutty 11 points
Bernie was correct. If you want a complete kit get this PRODUCT ID: 9171000553-0
Customer Reviews
Create an account
Overall Rating
ljalves
78 likes
Value
Quality
1 thumbs up!
Good stuff! Very very cheap and with amazing usability!


No comments. Reply..

Overall Rating
mpjf01
53 likes
Value
Quality
Like it?
Version 2 could be made more versatile by being wide enough at the face end to accomodate people who wear glasses. Not all eye issues can be dealt with by magnifying lenses. The present version needs to be seriously modified to fit over glasses.


9 comments. Reply..

Overall Rating
QuadFinger
267 likes
Value
Quality
Like it?
Well packaged, simple, quick assembly and is definitely usable. It wont replace my current setup but they sure are a nice INEXPENSIVE way to take people for a "ride" with you. TIP#1 on selecting the lens. Build the goggle completely except for the lens, don't glue it in yet.. Connect the goggle to a video source (Cable box, X Box, etc.) and place it on a flat surface so that the screen is facing the ceiling. Place a lens on the frame and lower your face to the goggle, adjust the lens, rince and repeat.. When you find the one that works best for you, you can attach it. TIP#2 use thin strips of double sided tape on the top and bottom to attach the lens, that way you can easily change it our if you need to. Great product at a great price.


No comments. Reply..

Overall Rating
Ray
4 likes
Value
Quality
Like it?
Great design and fantastic value! Fresnel lens is adjusted thru foam at the edges, and works very well. Light tight, light weight and light on the wallet! Fantastic value with the monitor included, they even slipped a couple of extra lenses in my package, I couldn't be happier......Ray


1 comment. Reply..

Overall Rating
Pavel
15 likes
Value
Quality
Like it?
- The screen is average, but enough to fly. Very noticeable graininess. - Mount lens is not the best. transmits light at the edges, had to glue some foam around. - Helmet shape successful lightly pasted wraparound edges and clipped under his nose. - Very light. 172 grams with wires and connectors (which can be cut off and throw another 20 grams)   In fact, for the price, a great acquisition to understand - what should be the helmet and refine it. As a blank - just shine.   - Buy a new monitor. - Buy a new lens for the entire clearance. - Neatly fit foam spacers for a person to not be reached by light.


No comments. Reply..

.....click here to see all reviews
Aff. Link