Please confirm your location:

USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Servos & Parts > All Servos
> Servos & Parts > Turnigy Servo
> Servos & Parts > Micro Servo 5-10g


Turnigy TG9e 9g / 1.5kg / 0.10sec Eco Micro Servo

Turnigy TG9e 9g / 1.5kg / 0.10sec Eco Micro Servo
Turnigy TG9e 9g / 1.5kg / 0.10sec Eco Micro Servo

The TG9e boasts the same performance as other servo's 10x the price with a .10sec travel time and up to 1.5kg in torque and an ultra narrow dead bandwidth!
The TG9e performance is on par with the famous HXT900, however the TG9e isn't as resistant to crashes or over-loading.
Please always ensure your control surfaces are bind free.
Dimension: 23x12.2x29mm
Torque: 1.5kg/cm (4.8V)
Operating speed: 0.10sec/60 degree 0.09sec/60 degree(6.0V)
Operating voltage: 4.8V
Temperature range: 0-55C
Dead band-width: 7us
Lead Length: 260mm
The TG9e does not have the same strength and longevity as the HXT900.
Please ensure your control surfaces are bind-free and always check servos after a hard landing or crash!


This product available from a warehouse near you!

Weight (g) 9
Torque (kg) 1.5
Speed(Sec/60deg) 0.09
A(mm) 30
B(mm) 23
C(mm) 27
D(mm) 12
E(mm) 33
F(mm) 16
Update/Add my own data
Customer Data

Weight: 15g
International Warehouse
USA West Warehouse In Stock View Item
USA East Warehouse In Stock View Item
Price  $2.34

  • Turingy TG9e Replacement Servo Gear Set

    Combo Price: $0.55   BACKORDER

  • TURNIGY Voltage Booster for Servo & Rx (1S to 5v 1A)

    Combo Price: $2.95   IN STOCK

  • 15CM Servo Lead Extention (JR) with hook 26AWG (5pcs/bag)

    Combo Price: $1.56   IN STOCK

Further discounts available for registered & logged-in customers.
 Customer rated
Total of 229 discussions.
Nightstone  10 points - 6/21/2015
These are Horrible. Worst servo's I have ever purchased. Out of the 8 I purchased every single one has striped out.
Tomasz  1 points - 6/19/2015
It broke second time using. Don't buy this!
Craig  2 points - 2/14/2015
Will this work OK in my HZ supercub? Planning to use 2 of these to add ailerons.
 n-nike 109 points
Yes they will work perfectly.I am using the same at the same place.Just go for it.
 clebercombateseg 42 points
 clebercombateseg 42 points
Trabalha Bem Sim
ray BR  107 points - 2/1/2015
very good this servant! the low price is worth buying it! muito bom esse servo! pelo preç*o baixo vale a pena compra-lo!
 n-nike 109 points
Right.Bang for the buck.
Lenny J  31 points - 1/22/2015
Anyone know the power consumption on these? I'm having trouble running four of these off a 25-30A ESC with a 3A BEC (at least the specs say 3A), model #HK-SS30A. Receiver is orange R615. 3 servos work fine, four do not...receiver quits when I try to run all four at the same time. Thanks!
 Carter 1 points
I haven't tried with four of these, but currently I have six HTX900s on my Bixler 2 and it runs with no problems. I don't know exactly what is wrong, but personally I'd try hooking the servos up with either a different ESC or a stand-alone BEC if you have one. Best of luck!
 n-nike 109 points
maybe the bec on the esc is faulty or is overrated.please check it with the manufacturer.i have tried 4 of them with 3 amp bec with no problems.
 Lenny J 31 points
Still trying to find out the power consumption for these servos before I assume the ESC is rated incorrectly. I have tried the same set up with different ESC's (same model), different RX (same model) and different servos (same model). Same results.
 Carter 1 points
Im still fairly baffled. These are analog servos so if you aren't using them their amp draw should be 0. You could try hooking up different servos... at least you'd know if the servos are the problem.
 Lenny J 31 points
No probs unless moving all four at the same time. Someone else on my post for the 25-30A SS series ESC said these take about 600mA each plus a bit of consumption for the RX. That's getting close to 3A. I'm guessing the ESC is not rated correctly. It probably has a 2A BEC, not 3A as advertised.
 RonRC 4135 points
Hi Lenny J, Can you provide what type of model you are running these on? If the control surfaces are large enough, or stiff enough, it would cause high consumption issues. All the best and Happy flying!
 Lenny J 31 points
I was trying this on a Flite Test FT3D that I built. Receiver browning out even with no horns on the servos so it is not a matter of stiff surfaces. I really believe the 3A BEC is not correct on the HK-SS30A (I have 3 of them, same results with all 3). Tried 3 different RX now too. All the ESC's were bought at the same time, maybe a bad batch. Everything works great off a cheap ebay 40A ESC.
 RonRC 4135 points
I have 4 of the HXT900 servos on my 3D plane. However, I am using the Birdie ESC (no longer available) and it works fine.
 RonRC 4135 points
I had several of those SS 25-30 ESCs and reflashed them with SimonK. I used 4 of them to power my FC 28-12 1534kv motors on my UFO. They works great in that capacity but didn't have to power anything but the FC and the RX (all powered from the M1 ESC). Glad you got yours to work with another ESC. If you can, reflash those SS ESCs and build youself a tricopter (only one servo).
 Lenny J 31 points
Thanks for your replies and the cool videos Ron! I'd like to get into reflashing but don't know the first thing about it. If I started a discussion on the ESC page, would you be willing to comment with a few tips for the newbie and I will award credit? Sorry I can't give any credit on this thread!
Customer Reviews
Overall Rating
57 thumbs up!
It's similar but not the exact same as the HXT900, however I think the gears should be interchangable. I checked the current draws on 5v: idle, about 10ma, freely moving full swing or with a little resistance, about 100-200ma, and stalled, 600ma. Also, dunno why they call it a 9g servo- it's right around 12 grams, but that's no problem, should be listed as that. Fairly precise, nothing special. However, if you need a cheap servo, this is the one.

6 comments. Reply..

Overall Rating
30 thumbs up!
It looks like the HXT900, has the same size but is a clone of the HXT900. The precision is a little bit lower than the HXT900, but still good enough. I like the longer wires. It seems that this servo is a bargain buy, but we still do not know what they'll do after hundrets of flights. I'll give 5 stars for now.

6 comments. Reply..

Overall Rating
21 thumbs up!
This servoe is exactly same as Tower Pro SG90.
The plastic case is exactly same, if remove the stickers, you may not be able to point any different.
I opened them the electronic circuit board is exactly same as well with same motor same cable with same length.
I have replaced the gears and no problem.
Even the QC and test stickers inside and out side are same and in the same area.
The Tower Pro SG90 is very strong and long life servo.

4 comments. Reply..

Overall Rating
12 thumbs up!
Installed in cub, beside the TG9, and this one noticably faster... had to replace the TG9 with another 9e. Not sure if I would put this in a high torque demanding application, but for most planes this is perfect, cheap and fast!

No comments. Reply..

Create an account
Overall Rating
9 thumbs up!
I have used this on a home built rafale eurofighter profile plane made from depron foam. I just noticed comparing it to the HXT900 9g (which I also have), its a tad slower. The specs on this turnigy TG9e does say 0.10 sec while the HXT is .12sec. I bought only 2 of these since this is the cheapest servo I could find at the time of my purchase. I suppose this servo can be an indispensible on or a disposable one depending on how you would use it. For me, it served the purpose as tailerons. Quality wise, it does not look any different with the HXT 900 9g. A millimeter difference based on the tech. specs. and it pulls 1.5kg instead of 1.6kg for the HXT900. If you are looking for a cheap servo, this is it. LHS will offer this at a ridiculous 3 times price. I would like to support my LHS but at the price hobbyking is offering these, makes me think twice. I can order spare parts and even with the shipping costs, it will still be cheaper with hobbyking. They just slam the competition if not all, most of the spare parts/planes/heli on LHS.

No comments. Reply.. here to see all reviews
Aff. Link