Turnigy 1300mAh 2S 20C Lipo Pack

 Jan 18 points

Hi turgut, if "totaly empty" as you said is below 6V, just say them good bye, it will not keep capacity any more :o( (let´*s measure them)

 turgut 12 points

thank you Jan, i have measure the voltage both of cells, one of about 4 v but the other one is 0,3 v.

 Jan 18 points

so if they are 4,3V total,they are K.O.forever, it is a garbage :o( Thanks for credit and have a nice day :o)

 Kalana Mihiranga 75 points

You can try nimh charging

 sonspit 1 points

this is a great and reliable charger and balancer. balancing plays a major part in lipo IMAX B6-AC Charger/Discharger 1-6 Cells (GENUINE)

 Luis Felipe Nunes 1 points

Please give us the correct webpage, because we didn´t find this specific truck.

 Jerry 7 points

yes, hobbyking sells adapters for almost any type of connection. you have deans plugs. you can buy an adapter to go from deans to XT60 which is the yellow plus that came on this battery.

 Sofia 12 points

if you have several adapters that

 charlieshobbies 11 points

it's best to change them all to one standard sit. Dont click on alltec goias he didnt even answer the question.

 mick au1404 4 points

there are many plugs available but i would recommend the yellow tx60 plug set or the red deans plug set.Make sure the female plug goes on battery and male on the esc and your charger.Both plug types are available from hobby king. Oh also solder wires onto plugs one at a time and the right polarity.

 rizka 90 points

***if you are happy with the answer please give the customer a credit***

 p3tras 240 points

Hi, the bigger plug is for discharging (connection to ESC). The smaller plugs is used to balance cells. Computerized chargers charges through both plugs, but cheaper ones only through balance port. If the big connector doesn't fit to ESC, either change it on ESC or battery (if you'll change it on battery - be careful not to short red and black cables)

 Volodymyr 4 points

And are there any cables available to connect different plugs on esc and battery?

 p3tras 240 points

Yes there are, but it would be much easier just to re-solder them. What connector does your ESC has?

 Volodymyr 4 points

'L' shaped, two rectangles like |_ and battery- two rounded holes... Thanks in advance!

 p3tras 240 points

Search for "Nylon T-Connectors 10 Pairs (20pc)" on hobbyking. Are these the same connectors?

 Volodymyr 4 points

Hi p3tras, yes, looks-like those are the same (or very similar ).. maybe you know any adapter I could purchase ? I'm not sure I know how to change the plug.. and what plug I need to change to ? thanks in advance!

 p3tras 240 points

Hey, here is the adapter you could use "Male XT60 <-> Female T-Connector (1pc/bag)". But it is back-ordered at the moment. However, I strongly recommend to change plug on the battery by yourself. You would need to re solder it. Search for videos on youtube about soldering. You can find required T plug at almost every hobby store.

 Volodymyr 4 points

so I should change it on the battery, or it's better to do on esc side ?

 p3tras 240 points

It is safer to change it on the ESC side and if you would buy more batteries from HK then you wouldn't need to change connectors at all. But if you have other batteries you use with your plane, you have to change them on the other batteries too...

 Volodymyr 4 points

p3tras, thank you very much for your assistance! 2 more questions: 1) most batteries from hk have discharge plug: "XT60" ? 2) So, in case if I use this batteries, - I'll require male plugs for ESC side, right ? 3) there's black and red wires. Does not metter how to solder them to connector ? 4) when I'll connect battery to esc ** red<->red, black<->black ? many thanks!

 p3tras 240 points

You're welcome Volodymyr! 1) Yes, most batteries from HK comes with XT60 plugs. 2) Yep, you need male on ESC side. 3) Black wire always connects to black ESC wire (just as red to red). If you would connect it otherwise you would see some magic smoke :). And remember - black and red wires on the battery can't touch each other or you can damage the battery and see some sparks

 Sofia 12 points

the white connector is for connecting to a charger with balancer, the cable thick red and black goes to the esc, you can also charge the battery for the cable but unbalanced.

 alchemy 10 points

but if you are using a good charger like the IMAX B6-AC Charger/Discharger 1-6 Cells (GENUINE).The balance white plug and the ex60 plug must both be used.I also have charged my turigy nano tec 2200 3 cell at 4400mah ,in other words double the power quick but please keep a eye on your battery if it gets to hot stop immediate but so far allmy turnigy batteries including my 2 cell 4000amh nano tec 65c can handle double charge hope i could help you Sharon South Africa

 Francisco 42 points

Si, usted puede emplear esta bateria en cualquier avion, si cuenta con un ESC de maximo 20mAh.

 antonlavicka 11 points

Velmi dobra baterka. Mam ich viac a vsetko slape

 Sofia 12 points

claro que puedes, como dijo la respuesta anterior hasta 20 amp

 charlieshobbies 11 points

si pick me!

 charlieshobbies 11 points

click me so I can get the discount.

 rizka 90 points

***if you are happy with the answer please give the customer credit***

 Joe_rus 74 points

Yes you can.

 secoz 79 points

Yes It can be used without problem

 NickyV 18 points

sure can....... but if your esc doesn't have lipo cut off, you'll prob need an external buzzer or indicator

 __CSR 3 points

Yes he can be used

 Krakker 10 points

Yes they can. I've used 2s and 3s batteries on brushed crawler motors. The sizes I use are 850-1500mah and around 25-30C. The larger the mah, the longer the run time, the higher the "C" rating, the more power you will see.
Some ESC's have a limit on cell count so check and see what you can use.

 Etto_S. 55 points

yes, just play attention in voltage...

 Daniel2000 54 points

of course, but its the ESC that need to be lipo compatible, if there is no low charge fail safe, you're going to kill your lipo since if it loose to much charge, the batterie will be dead for good

 JERRY 9 points

Yes you can use a lipo to power brushed motors

 Mroek 16 points

Hi. Of course. I use with my 280 brushed motor 2S battery.

 Ghost Plane 13 points

Yes you can.

 kevin 14 points

yes but they wont last long

 Josiah 7 points

Brushed motors aren't really designed to be used with lipos because of the huge amount of power lipos put out.

 Freddy 5 points

Absolutely!!

 Straight Up 754 points

Yes, no problem. You must use a brushed controller, but the lipos will work great!

 ausjj 10 points

No problem, but you will need to use a lipo monitor.To avoid over discharge.

 Danilo 3 points

Yes they can. But you should be sure that the motor already did the checkout before using it with this high discharge battery.

 Christopher 8 points

Yes they can! I use them in my SuperCub, my Rock crawler and my Slash!

 kdawgdinner 263 points

uuh yesss..

 jjranger 8 points

Yes they can run on brushed motors. Just keep in mind you have to use a speed controler that has the proper voltage cuttoff for lipo's

 lucriz 15 points

yes, there is no problem, i use them on a flying wing with a speed400 brushed motor. All you need is proper setup the cutoff voltage on the ESC.

 james 6 points

definitely

 integyjato3.3 8 points

used them on my mini lst2 and used a low voltage buzzer that warned me when th ebattery was low. They are very cheap.

 LHM74 18 points

****

 Brandon 28 points

yes you can, as long as your amp rating on your battery is higher than the the draw rating on your bec you should be fine, you might want to look at a little bigger of a battery, maybe like a 1500mah li-po, especially if your racing or bashing for long periods of time

 cesch01 40 points

yo se las coloque a un Bec switching marca Pulso de 3 Amper en un canary 40 y funciona bien

 papatt74 16 points

I use the same sbec on my tigermoth with a 1000 mAh 2s and an easymodel receiver, i can fly 45 minutes without changing the lipo.

 Christopher 8 points

NO, you would need a BEC that will go as low as 6V. Castle Creations BEC will work.

 lchelis 31 points

The better and cheaper imax b6

 Daniel 14 points

No, it will be enough. Just don't forget to plug in the balancer plug too!

 minirider42 41 points

you' ll need to find an adapter or change the main plug if you dont have the same type on your charger, i use nylon t-connectors on these packs and it ' s perfect, with a lot of chargers,

 Danilo 3 points

You have to find an adapter from your charger to JST-XH charging plug.

 rdscholz 40 points

it should i use it in my mini losi buggy

 minirider42 41 points

i think yes, but it 's small capacity an discharge for the mini revo you have zippy 2200mah who are perfect size (no or minor adjustements) for longer run time a lot of persons use them in mini revos and their satisfied

 minirider42 41 points

i missed the link for the 2200' he's www.link