Please confirm your location:


USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Electric Motors > Motor/ESC/Prop Combo > Car Motor/ESC Combo
> Cars & Parts > Electric Motors > Motor & ESC Combos

  RATED:

Turnigy Brushless 1/8 Scale Car Power System 2000KV/150A

Turnigy Brushless 1/8 Scale Car Power System 2000KV/150A
Turnigy Brushless 1/8 Scale Car Power System 2000KV/150A

An extremely powerful brushless system for any 1/8 scale truck, car or buggy.
Equiped with cooling fan and a large surge ESC, this system will greatly increase the power output of any standard system.

ESC Spec.
Continuous Current: 150A
Burst Current: 1080A
Resistance: 0.0002ohm
Suitable Car: 1/5 or 1/8 on and off road.
Battery: 2-6 cells Lipo (6-18 cells NI-xx)
BEC output: 5.75V/3A switch mode buit-in
Motor type: Sensorless and sensored brushless motors >3.5t
Dimension: 68 x 55 x 45mm
Weight: 150g
 
Motor Spec.
Model: 4074SL V2.0
Kv: 2000
Scale: 1:8
Max Current: 76Amp 
Poles: 4
Weight: 386g
Diameter: 40mm
Length: 74mm
Shaft length: 20mm
Shaft Diameter: 5mm
 
Contents:
ESC: 1 x 150A
Motor: 1 x 4074SL (2000Kv)
Pinion Gear: 21T
Turnigy Programming Card
 
Note: Motor color may vary.


PRODUCT ID: TR36715021PG


This is an archived page. This product is no longer available and has been replaced by a newer product.
CLICK HERE TO VIEW THE NEW PRODUCT


Weight: 899g
Quantity: 
International Warehouse
stock
-4
Price $189.95

Related Products
Customer Also Bought
Further discounts available for registered & logged-in customers.
STOCK ARRIVAL ALERT

Enter your email address to get an email the second new stock arrives.
Estimated factory delivery date;
Stock updated frequently.
No ETA on 1 item. Goods arriving every 14 to 21 days.
 Customer rated
574
crowns
  
 
Total of 136 discussions.
MARCO  1 points - 6/11/2014
 
Hi , why it's no possibe to add this item to the cart??
MARCO  1 points - 6/10/2014
 
DEAR ALL WHY THIS ITEM CANNOT B ADD TO CART??? PLEASE LET ME KNOW
 Joel 10 points
It might be out of stock or you are placing an order from the wrong place
jerry  4 points - 1/12/2014
 
I just bought a traxxas funny car roller I need something that will be better than the castle 2400kv motor that was in it it is a 1/8 scale car the motor that was in it had a 36mm x68mm brushless what do you have in a motor esc combo that will kick ass I want 80 plus mph
 ROGER RAMJET 53 points
THIS SYSTEM WILL RUN UP TO 6 CELL FOR MORE SPEED USE A 22 TOOTH PINION IT SHOULD GET YOU OVER A 100 MPH YA IM NOT KIDDING .
chad  3 points - 1/6/2014
 
would this work on my truggy
 Sam 14 points
I would say yes but it depends on the motor mount on the truggy. The motor is much larger than on my 1/8 truggy.
 ROGER RAMJET 53 points
YES IT WILL YOU CAN RUN 4 TO 6 CELL AND I WOULD GO WITH A 14 TOOTH PINION
Nicholas  1 points - 1/4/2014
 
Would thi combo work in my drifter
 ROGER RAMJET 53 points
NO IT WILL NOT ITS TOO BIG
Customer Reviews
Overall Rating
Proteuz
50 likes
ValueUNRATED
QualityUNRATED
1 thumbs up!
I used this in my TNX5.2r as a replacement for the stock nitro engine. Took a E-Revo tranny and im running 21T pinion on the stock tranny spur gear. I've run this for close to 7 months now and i've not had any problems with it. Running on 4s lipo and the engine has no problems with this lipo setup. Grate ECS with plenty of programming options using the programming card. The only downside i can see is if you run the engine above 4s.


4 comments. Reply..

Overall Rating
Customer
90 likes
ValueUNRATED
QualityUNRATED
1 thumbs up!
I have run a castle creations mamba monster. I'll say right now this setup makes CC it's bitch. and it costs half as much money. I used to be a loyal CC customer until i spent 300$ for a 1/8 scale mamba monster system . I used to buy CC because they advertise heavily MADE IN USA and I try to show some loyalty to the local manufacturers. My mamba system had made in China all over it. Turnigy stuff rocks and works good as any brand I have ever used


21 comments. Reply..

Overall Rating
Customer
90 likes
ValueUNRATED
QualityUNRATED
Like it?
One more thing to add. I am running Turnigy ESC's motors and batteries in aircraft, helis, cars, and boats. Their quality is second to none and nobody touches their price. I have seen people complain about turnigy stuff and usually they under engineered their system. I have no complaints about this company except harshly marked up shipping costs. If they got that straightened out I would use them as my main source.


1 comment. Reply..

Overall Rating
jvgjvg
73 likes
ValueUNRATED
QualityUNRATED
Like it?
i only have this esc from hobbywing it's the same as the turnigy. It's simply the best esc for 1/8 scale cars i have ever had. i had the novak, mgm compro, castle MMM. the construction of this esc is very strong!


2 comments. Reply..

Overall Rating
Johan Engman
12 likes
ValueUNRATED
QualityUNRATED
Like it?
Running this in a stock Traxxas E-Maxx #3905. Excellent power. Running with 2x2S Rhino, for a total of 4S (14,8v). Insane power! No heat issues!

Highly recommended!!


No comments. Reply..

.....click here to see all reviews
Aff. Link