Please confirm your location:


Arkansas warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the Arkansas warehouse even better value!
  Item found in the following categories;
> Hardware & Accessories > Propellers > Turnigy 3 Blade Sport (Electric)

  RATED:

3 Blade EP Propeller 8x6 / 204x178mm

3 Blade EP Propeller 8x6 / 204x178mm

3 Blade EP Propeller 8x6 / 204x178mm



PRODUCT ID: XYH3B8x6


This is an archived page. This product is no longer available and has been replaced by a newer product.
CLICK HERE TO VIEW THE NEW PRODUCT

Length (Inch [X]) 8
Pitch (Inch [Y]) 6
Update/Add my own data
Customer Data
Related Products
Customer Also Bought
Further discounts available for registered & logged-in customers.
 Customer rated
520
crowns
  
 
Total of 10 discussions.
Kim  2 points - 4/18/2013
 
Whats the mm of the hole??? Thanks
trishan  1 points - 4/4/2013
 
yes it will, just compare the size of this propler with other planes and there engines to see that is this suits to your catalina
Wawwee  1 points - 1/30/2013
 
Hi Will this prop fit the Catalina? , two engine in the wing rotate in the same direction ,
ThePholey  3 points - 2/15/2011
 
Will this prop fit the Freewing F6F Hellcat?
 Napstr 1284 points
Yep it will but it doesn't have the hex fittings so doesn't sit as nicely - also the hub is larger so it doesn't look as nice as the originals - the blades are alot stiffer and larger but it doesn't seem to affect performance.
 ANLUCAS 188 points
Yes and it works very well.
Keep in mind though that after you secure it on the shaft, the F6F's plastic spinner won't fit.
I used a 3mm collet prop adapter after cutting the motor's shaft shorter so the look is nicer.
Gick  1 points - 2/10/2011
 
Is it possible tu use them on a MPX twinstar?
 CharlitoCZ 22 points
with brushless, than yes, only make sure, that you use them with the motors, they need this size
BEST ANSWER CREDIT AWARDED
 AdrenaCo 150 points
Depending on the type of motor you are using yes, but please keep in mind that 2 blade props are more efficient. Normally one would only choose a more than 2 blade prop to increase ground clearance or for scale purposes.
 CrashinDutchman 337 points
Size should fit, if I am correct the MPX TS is using 8*8 propellers (please check). If it will work with your motor and esc is another question.
 pierrehu 37 points
Sure, 10 " propeller fit without any pbm!
 alloba 22 points
If the motor could handled with the extra charge, of course. Regards.
 Shigeki 42 points
no, i'll use other planes.
 foster 402 points
yes but you need to buy the reverse of it to becuse you want the motors to conter rotate
 Wilhelm 282 points
We already used it on a TS2. Runs smooth but ****py depending on power. A 8x5 2-Blade TGY brings more power with less current. Looks good but flys not even avarage. Wilhelm
Customer Reviews
Overall Rating
AlexinOz
252 likes
ValueUNRATED
QualityUNRATED
7 thumbs up!
I'm running this on a Eurostar electric parkflyer from www.parkhobbies.com with a Turnigy 3530C motor and 25A ESC.

I didn't notice any balancing issues and the 3 blades look great.
Only problem here is the packaging - you'll get a "special packaging" box automatically added to the order, my prop certainly did not come inside this and I think it was designed to just jack up my postage fee.

Awesome prop, will buy more.


No comments. Reply..

Overall Rating
Customer
5 likes
ValueUNRATED
QualityUNRATED
2 thumbs up!
I did not give this 5 stars because I spent about 1 hour getting the two props I bought balanced properly. They were WAY OFF balance. Do not run these props on your airplane until you balance these. Prop came with many different sized adapters to fit different shaft sizes.


No comments. Reply..

Create an account
Overall Rating
Takly
153 likes
ValueUNRATED
QualityUNRATED
2 thumbs up!
Ran very well on my Dynam Spitfire on an 1800kv motor (far too powerful for it, I know) until it shook the motor of its mount and I lost a Spitfire )


No comments. Reply..

Create an account
Overall Rating
guipedroso
20 likes
ValueUNRATED
QualityUNRATED
2 thumbs up!
Good product, fits perfectly to my new projects... i bought a lot of this stuffs!.


No comments. Reply..

Overall Rating
AlfredoC
76 likes
ValueUNRATED
QualityUNRATED
1 thumbs up!
Very, very stiff. Rough surface finish. Weight was 22 grams before balancing. I had to work pretty hard to have it properly balanced, trim and tape were necessary. After balancing and adding the 5mm inner ring weight was again 22 grams.

I have replaced a Turnigy 9x3.8" two blade prop, on my Blade Dancer (motor: cf28-22), will fly test it tomorrow. Overall a good initial impression.


No comments. Reply..

.....click here to see all reviews
Aff. Link