USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
The new number one in performance and price! The new Turnigy Lipoly packs deliver full capacity at the said C rate. You wont find a better deal in Lithium Polymer batteries anywhere!
This battery like all TURNIGY's, will discharge at the said rate without voltage sag. Unlike other packs that call themselves 25 or 30C but really drop voltage 10-20% when pushed to the limit.
HobbyKing ECO6-10 200W 10A 6S Bal/Dis/Cyc Charger w/ acc.
I used the above charger with a 218 watt computer power supply converted and affixed with female bullet connector ends. It works great and was able to charge 5 2200mah batteries in about an hour. It helps to buy the 6 lead connector and balance wires when ordering the charger.
I plan on getting 3 of these with 3 of these chargers, http://hobbyking.com/hobbyking/store/uh_viewItem.asp ?idProduct=8247
Is there a better balancing charger that will charge all 3 batteries at the same for around $35?
Have a look at this parallel charging board - Produkt ID: PCB004 Charging 3 of these require a powerful charger like this one: HobbyKing ECO6-10 200W 10A 6S Bal/Dis/Cyc Charger. Costs around 35$
HobbyKing ECO6-10 200W 10A 6S Bal/Dis/Cyc Charger w/ acc. I used the above charger with a 218 watt computer power supply converted and affixed with female bullet connector ends. It works great and was able to charge 5 2200mah batteries in about an hour. It helps to buy the 6 lead connector and balance wires when ordering the charger.
I have been using this battery for a few month now and testing capacity on occasion to track cycle life.at a 15c discharge rate and 1c charge rate. it has lost very little capacity after 50 cycles.and still holds voltage over 11.5 on full charge under load.this is an incredible battery (best that I have tested so far)at an unbelievable price.I tried it in my formosa at a 5c discharge rate and sae no difference in flight performance from the increase weight but much longer flight times.another great product at an incredible cheap price from H.K
lipo com otimo rendimento em minhas asinhas que fabrico elas voam uma hora, e nos aviõ*es com envergadura de um metro dura ate 25 minutos, otima bateria!!
The 25c number, if I us a battery with a 35-70c will that cause any problems?
I ask because everyone seems to be sold out of all the 2200 mAh 3s 25c but I found a 2200 mAh 3s 35-70c battery. I'm unclear on what the 25c means.
The C rating of a LiPo means how much current the battery can delivery at a time. The higher the number the more current draw the LiPo can handle. For further information google for "lipo c rating". In general a higher C rating is never a problem.
Well that depends on what you want to use it for. If you want an 1:1 alternative look for the ZIPPY Flightmax 2200mAh 3S1P 25C. If you want a LiPo with a larger capacity you need to check if your aircraft or heli can carry the additional weight and you need to check if the larger dimensions fit into your model.
This battery is perfect for the AXN after a little trimming inside the Nose area of the plane, the addition of the 30amp ESC with 3amp BEC just calms the mind. The battery charged perfectly with the balance charger, it is a very good quality Li po pack.
Hello
I accidentally managed to not have a product that is not in stock. Turnigy 2200mAh 3S 25C Lipo Pack. The question is, when there will be, or that it can be replaced with others that are in stock? Thanks in advance for the answers.
You can contact customer support and change Turnigy 2200 mAh 3s 25c lipo to Zippy Flightmax 2200mAh 3S1P 25C PRODUCT ID: Z22003S-25. They cost the same and are identical in quality.
BTW the Turnigy battery usually comes back in stock within 2 weeks.
I remember I wanted to do such a thing once, but I had to simply cancel the product and get a refund, or I could also cancel the whole order. Go into Live Support and ask, maybe they'll tell you something different. good luck!
thanks *sharkey9, and how do u connect it to the charger.... black-black & red-red??
and r there any more lipoly in the same price range with better performance??
This is the best performing LiPo you can find in this price range.
Yes the charge wires are connected black to black and red to red. Look for some videos on youtube on how to charge lipos using accucel-6. There are loads of really helpful videos.
I suggest to use the balance charging feature on Accucel-6 to increase the life of your lipo. Atleast balance charge your lipo after 3 to 4 charge cycles.
Connect the battery as stated above and use balance charging if you want maximum safety, maximum capacity and maximum battery lifespan. Balanced charging needs a bit longer but if time is no issue, use it. The balance plug fits directly into the Accucell so no adaptor is needed. This battery is the best-seller in this category, with a reason...
each cell is charged separately with balanced charger, this charger charge black red, the black is used for all cells.
I strongly recommend using standard balance charger , in that case , just plug the charging plug to the corresponding socket.
First ensure that your are in Lipo charging mode (if your charger has other options as well). Next, to charge an 11.1v battery, you must set the input voltage to the proper amount so that the charger knows what the minimum voltage and peak voltage will be. Generally speaking, chargers identify voltage in terms of number of cells, ie 1S is 3.7V, 2S is 7.2V, and 3S is 11.1V. Therefore in order for you to charge the your 11.1V battery, you must set the number of cells on the charge as 3S.
Sorry posted the response under my old account
First ensure that your are in Lipo charging mode (if your charger has other options as well). Next, to charge an 11.1v battery, you must set the input voltage to the proper amount so that the charger knows what the minimum voltage and peak voltage will be. Generally speaking, chargers identify voltage in terms of number of cells, ie 1S is 3.7V, 2S is 7.2V, and 3S is 11.1V. Therefore in order for you to charge the your 11.1V battery, you must set the number of cells on the charge as 3S.
Above answers are misguided. Input Voltage refers to the actual INPUT to the changer, that is your power supply. I think the error is more related to the amperage than the votlage itself, as when you draw more than your power supply can, the voltage sags, giving the error. I have this error all the time when triying to charge 3S from my car battery. I'd recommend checking the power supply or getting a better one, or in any case, try charging at a lower amperage than you intend and see how that goes.
This is a great battery for AXN. It will give you very good flight time, minimum 15 min with high throttle and easily half an hour with a little throttle management.
I used ID: T1800.3S.20 in my AXN floater. Will glide slightly better. Also notice that PNF AXN power connector is T and you need to change it to XT60 ID: 601Ax5 or change battery connector to ID: 606Ax10. Recommend to use XT60 connectors.
It's a good battery for the bixler 2. However, if you want to save a couple of cents you can use the 20C battery. But this is a much better battery and can handle higher load.
I own a Parkzone F4U Corsair and this battery works great. I normally get 8-10 mins of flying without even reaching the battery below voltage level. Remember to take in account the dimensions and weight, try to purchase battery sizes close similiar to those of the original. It will help maintain Center Gravity and avoid cutting out more space.
You can safely charge this battery up to 4C actually, which is 8.8 if you charger allows it. The problem with charging above normal 1C (2.2a) is that your battery life gets reduced which is a give or take.
Ich habe eine Lieferung von 2 LIOPs erhalten.
Beide LIPOS haben einen Spannungsdrift, der nicht zu balancieren ist.
4,07/3,86/4,20 (LIPO 1)
4,17/4,07/4,20 (Lipo2)
irgendeine Idee, wie man das geregelt bekommt?
Hat dein Lader einen storage-charge/-discharge modus? Wenn ja, probier den mal und wenn damit alle Zellen bei 3.85V gelandet sind, lade sie danach voll. Das alles mit 1C natuerlich.
Hallo
Ja, bin gerade dabei den LIPO immer wieder runterzufahren und neu aufzuladen
Mittlerweile ist der eine OK, der andere zickt noch auf demr 2. Zelle bei 4,01 v rum. langsam wird aber besser. Mal sehen ob ich ihn auf 4,2V hochbekomme
Set it at 2.2 amps - 11.1 volts and - if possible plug it in to a battery medic at the same time. If your charger has a balance mode then use that. They are pretty robust batteries,and will last much longer if your charge them this way. The battery medic is one of the best tools I have in my flight box. I fly most of my small EDFs on these batteries and they are great value.
compr 7 baterias y de estas una me sali con una celda inflada y mi cargador no la carga pues solo reconoce como si solo tubiera 2 celdas, las otras 6 baterias salieron bien y hasta el momento no he notado perdida en la capacidad nominal de estas.
Ordered 5 battery's, and only one failed after about the second use. 1/4 the price of others, and 4/5 of them are still plunging away and have massive power punch. I have nothing really bad to say, great deals.
3 comments. Reply..
Overall Rating
elicopterhirobo
21 likes
Value
UNRATED
Quality
UNRATED
7 thumbs up!
Sono perfette per t-rex 450 ,volo benissimo senza aver speso un capitale
1 comment. Reply..
Overall Rating
Pilot013
35 likes
Value
UNRATED
Quality
UNRATED
7 thumbs up!
Very nice batteries. The weight is OK. I use 2 of them on electric plane and it runs great...
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
.jpg)
