USA warehouse now open. Our USA warehouse is now open!
Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
Car cigarette lighter adapter for 12v chargers.
Adapter includes two size 12v plugs and will fit our Turnigy, Imax, Emax and other chargers. Plug 1) Outside diameter: 5.49mm Inside diameter: 2.52mm Plug 2) Outside diameter: 5.49mm Inside diameter: 2.12mm Max current: 12A, 25V A great way to supply power to chargers without lifting the bonet of your car! Or, for those that like charging packs in the car on the way to the field. Do not use more than 50W. (about 3,600mAh 3S @1C charge) NOTE:Please ignore the labels that say 'Futaba' and 'JR'. For some reason the factory believed you can charge your transmitter with a 12V car power supply. The label is helpful in inidcating polarity of the plugs, however. DO NOT CONNECT THIS TO YOUR TRANSMITTER! IT IS TO POWER BATTERY CHARGERS ONLY.
PRODUCT ID: CAR-FU-JR-TX
This product available from a warehouse near you!
Will this work for the turnigy accucell 6? I'm hearing about cutting leads ans wrong polarity
Yes it works for the accucell6 if you use the plug with the positive in the center. It's labeled 'Futaba' in the picture above.
Max. 12A? Refer to *******rc-fpv.pl/viewtopic.php?p=205673 if you want to know what happening when you charge batteries with 4A current...
Definitely not suitable for 12A current. Melted at 12V/5A.
Sorry for the wrong link. Check this out http://rc-fpv.pl/viewtopic.php?t=14407 - charging current is only 4A.
Will this work with the $5 Turnigy 2s-3s balancer and charger?
it will work perfectily with that yes i ordered for one yesterday with the charger
I wish the note at the bottom to not plug in to your TX was there before i bought this. The label was a addition after the fact, im guessing someone destroyed there tx but lucky all that happened to my 400 dollar spektrum was the fuse in the charger (this item) blew. Still a great idea for your chargers. I know i will need this some time lol.
Create an account
Overall Rating trashbug
17 thumbs up!
NEVER, NEVER, NEVER, PLUG INTO A TRANSMITTER!!!!
Cut the JR connector lead in two, reverse the polarity (black to red and red to black) solder ends back together and insulate. You can now use Car Cigarette Lighter Adapter to connect to: TR-5011 Turnigy-3S Turnigy-420 U-ACC6 Turnigy Accucel-6 And probably many more. If your 12v input charger connector uses a negative shell and fits the charger it will work
Overall Rating Son of Paleface
7 thumbs up!
CUT THE JR LEAD OFF , BECAUSE ITS THE WRONG POLARITY FOR THE CHARGERS
Overall Rating elytoros
5 thumbs up!
E un prodotto molto buono e utile,o provato a usarlo in macchina per caricare la radio,e per il carica batteria,bisogna stare attenti alla polarita
Overall Rating Abukhalid
3 thumbs up!
I ordered two, they both came with a 3A fuse. :(
So when charge with 5A, the fuse was cut. then i replaced them with a higher rating fuse 13A, but then, the adapters have melted. This "Car Cigarette Lighter Adapter for charger" Must be rated 3A max. NOT 12A.
Very good for the Turnigy 6-Cell charger. Little loose, but it works.
.....click here to see all reviews