Please confirm your location:

USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Electric Motors > TURNIGY
> Electric Motors > Outrunners by size > Micro (Below 22mm)


Turnigy 1811 Brushless Indoor Motor 3800kv

Turnigy 1811 Brushless Indoor Motor 3800kv

Turnigy 1811 Brushless Indoor Motor 3800kv
Dimension: 22mm x 18mm, 30mm(with shaft)
Weight: 11g  (kv2300) (not including connectors)
Diameter of shaft:F2mm
Length of front shaft:F8mm
Lamination thickness: .2mm
Magnet type: 45SH

Download data files;

PRODUCT ID: T1811-3800

This product available from a warehouse near you!

Kv(rpm/v) 3800
Weight (g) 11
Max Current(A) 7
Resistance(mh) 0
Max Voltage(V) 7
Power(W) 0
Shaft A (mm) 2
Length B (mm) 21
Diameter C (mm) 18
Can Length (mm) 7
Total Length E (mm) 30
Update/Add my own data
Customer Data

Weight: 43g Quantity: 
International Warehouse
USA West Warehouse In Stock View Item
Price $12.20

Related Products
Customer Also Bought
Further discounts available for registered & logged-in customers.
 Customer rated
Total of 23 discussions.
zachary  21 points - 1/19/2014
does anyone know the diameter of the part that has the grub screws in it?
 Daniel 3 points
The grubs screws are 2.5mm diameter, 2.5-3mm length. I just recently found this out as I had to replace one.
Gal  21 points - 8/10/2013
I created motor mount for this little motor. It is made for my Multiplex Fox. Here is a solidworks part: ******* . I hope it helps.
 Cacomistle 295 points
Hi Gal, could you type the first part of the URL again? it was censored before
 Gal 21 points is no longer available, i will upload the file on other server.
 Cacomistle 295 points
alright! thanks!
 Gal 21 points
Here you go mate, hope it
 Gal 21 points
******* pixli.frogvillage. info/ motor% 20mount .SLDPRT (remove the spaces)
TIAGO  3 points - 7/31/2013
dar para colocar uma bateria 3s nete motor
 Z 82 points
no 3s, only 2s
Paul  1 points - 6/20/2013
Hi, I have one of these motors but I need to attach the base to the motor. I have bought a 1mm hex key and a 0.7mm hex key, none bit the base nut. The 0.7mm one fits the prop shaft hex nut. What size key do i need and where can i get one from? Thanks
 Abhilekh 240 points
You may need a M2 hex screw in that case for the motor mount.
drzhivago  5 points - 6/12/2013
I have put in a MPX Fox 4 ch with 450mah 2S battery, prop 5x3, and 6amp esc for more than 3 years. Flight flawless, high speed, and ascension unstoppable despite the weight. Without any single problem. This is a driver for the 2S only. I think it's the best I've had bought with to 1811 2000KV too. best engine doubt that most of the micromotors. Are the same as hextronics. Highly recomebdables if you works with 7,4 v max.
Customer Reviews
Overall Rating
8 thumbs up!
Powerful Motors for Lama BL conversion. One made some noise until I changed the bearing. Beware of the thin wires, do not bend to often.

1 comment. Reply..

Overall Rating
4 thumbs up!
very good for my fox conversion..i used this motor with a 500 2s zippy and a turnigy 10 A esc and runs around 6 minute with less trottle also 10 min
with 350 3s 15-20 C more light weight more rpm but 4 min.

very nice nut also very delicate.....!

1 comment. Reply..

Overall Rating
3 thumbs up!
Bom motor, muito bem acabado, s aconselho a tomar cuidado para no quebrar os fios do motor que so bem frageis. Eu prefiro a verso com menos KV

No comments. Reply..

Overall Rating
2 thumbs up!
All cables of motor colored in black. How do I connect the motor to ESC ?
ESC cables colored in black, red and yellow.
Help pls.

6 comments. Reply..

Overall Rating
2 thumbs up!
V A W static thrust (gr)
gws4530 8.18 1.10 9.02 50
8.11 1.96 15.91 75
8.08 2.70 21.78 100
8.01 3.92 31.43 125
7.95 5.27 41.88 150 warm/hot
gws4540 about 10pcnt more current draw for same performance

1 comment. Reply.. here to see all reviews
Aff. Link