Please confirm your location:


USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Electric Motors > All Outrunner Motors
> Electric Motors > TURNIGY
> Electric Motors > Outrunners by size > Micro (Below 22mm)

  RATED:

Turnigy 1811 Brushless Indoor Motor 1500kv

Turnigy 1811 Brushless Indoor Motor 1500kv

Turnigy 1811 Brushless Indoor Motor 1500kv
Dimension: 22mm x 18mm, 30mm(with shaft)
Weight: 11.4g  (kv1500) (not including connectors)
Diameter of shaft: 2mm
Length of front shaft: 8mm
Lamination thickness: .2mm
Magnet type: 45SH


PRODUCT ID: T1811-1500

This product available from a warehouse near you!

Kv(rpm/v) 1500
Weight (g) 11.4
Max Current(A) 5
Resistance(mh) 0
Max Voltage(V) 7
Power(W) 0
Shaft A (mm) 2
Length B (mm) 20
Diameter C (mm) 18
Can Length (mm) 7
Total Length E (mm) 30
Update/Add my own data
Customer Data

Weight: 43g
Quantity: 
International Warehouse
stock
10+
USA West Warehouse In Stock View Item
Price $11.75

Related Products
Customer Also Bought
Further discounts available for registered & logged-in customers.
 Customer rated
512
crowns
  
 
Total of 13 discussions.
Denim  6 points - 7/23/2014
 
What is a good esc for this motor?
Elizabeth  1 points - 5/31/2014
 
What is a good prop to use with this motor? I'm building a small tricopter...
Rajat  4 points - 3/4/2014
 
any idea about the thrust guys?
Mista Crash  29 points - 5/15/2013
 
Good for flite test swapables?
 Cacomistle 300 points
good for the 3 most entry-level ones. too small for the bigger ones like the spitfire
BEST ANSWER CREDIT AWARDED
Matador70  1 points - 5/12/2013
 
What would be a good plane for this motor? Also, where could I get plans?
Customer Reviews
Create an account
Overall Rating
rtf-heli.com
123 likes
ValueUNRATED
QualityUNRATED
4 thumbs up!
These motors are perfect for running my tail motor on my electric heli. Working as a DD, the heli flys like a dream. Will buy more soon.
Thanks to the Turnigy Brand.


No comments. Reply..

Overall Rating
Ernesto Kortright
16 likes
ValueUNRATED
QualityUNRATED
3 thumbs up!
This little gem substitutes one of my gws IPS-a motors and what weight savings! The prop saver works with my gws 8043 prop and gives about 4 ounces of thrust. I used it with the turnigy plush 10 amp controller and it's smooth as silk. This little motor never got hot. FYI, the bullet connectors are short 2mm. Only issue: you need a super tiny hex key to tighten the prop saverI used a tiny screwdriver. Also you need screws for the mount. Great little motor at great price! Thanks HCity!


3 comments. Reply..

Overall Rating
Ernesto Kortright
16 likes
ValueUNRATED
QualityUNRATED
Like it?
This little gem substitutes one of my gws IPS-a motors and what weight savings! The prop saver works with my gws 8043 prop and gives about 4 ounces of thrust. I used it with the turnigy plush 10 amp controller and it's smooth as silk. This little motor never got hot. FYI, the bullet connectors are short 2mm. Only issue: you need a super tiny hex key to tighten the prop saverI used a tiny screwdriver. Also you need screws for the mount. Great little motor at great price! Thanks HCity!


1 comment. Reply..

Create an account
Overall Rating
francis3333
70 likes
ValueUNRATED
QualityUNRATED
Like it?
for 2 cell lipo , enough torque for small 200grm foamies , easy assembly


2 comments. Reply..

Create an account
Overall Rating
dacalap
42 likes
ValueUNRATED
QualityUNRATED
Like it?
tres bon moteur en 2s avec une helice 6*3 gws


3 comments. Reply..

.....click here to see all reviews
Aff. Link