ZIPPY 50mAh 20C single cell

 Ben Read 19 points

Yes just charge it at 0.1-0.2 amp other wise it won't charge anymore.

 HellyFlyer 1257 points

Yes you may use this in any of your small flyers which use a single cell small lipo battery.

 Thomas 10 points

My scale shows 2.0 grams.

 hudsonvx 60 points

My was 1.9g

 Jurben 1 points

I think that the calculation of hundredths of a gram is not particularly relevant

 helicopke 110 points

Sorry, should be 2 in parallel of course... But 1 of these cells can be charged 2c so 100 mah or 0.1 amp which most HK Lipo balance chargers (check the website) will or should be handle. Happy flying !

 pilotavery 131 points

I have 2 digital scales, and one showed 1.8, and one showed 1.9. I don't think it's that important. I mean, maybe if you are building a super nano with a 2 inch wing span, but than the batteries aerodynamics would screw it up.

 helicopke 110 points

hi, maybe put 2 in series and load at 100 mah ? I guess all you would need is a self made adapter cable and pluggs.

 __Luke 29 points

parallel then. And make sure they have exactly the same voltage before doing that.

 __Luke 29 points

I found a charger that supports these low currents.
(I have no experience with this charger myself, but it should www.link

 __Luke 29 points

add http : // before that...

 Nysom 50 points

ZIPPY50S-20C

 Nysom 50 points

The Blade Celectra (EFLC1006) will charge these at 100ma which is within spec of 2C.

 Nysom 50 points

The Blade Celectra (EFLC1006) will charge these at 100ma which is within spec of 2C.

 patchrules2000 13 points

as you can see in the description they are rated at a charge rate of 2c that means you can charge at 100 mah 1c rate which is 0.1 amp. most if not all variable lipo chargers support 0.1 amp increments in charging. i know my 4 button hobbyking charger will.