HobbyKing Online R/C Hobby Store : Corona 2.4Ghz JR Module & Rx (V2 DSSS)

View all comments | (61 threads)

7/25/2010
Rollon (0%)
i live in california. has anyone else experienced HK sending the item to them through zurich? it takes more time it has to cost more money it results in the items getting more wear and tear i have spent a lot of $$$ with HK. if this happens again, it will be the last order i place!!!!!

protheus (50%)
LiPo's are banned from airmailing thru the chinese postal service, so the only sollution for them is the Swiss post service. If you don't orded LiPo's, it will arrive sooner and directly from HK

Rollon (0%)
thanks for the reply. yes i have read that regarding batteries **but here is the thing** HK has send NUMEROUS orders that had no batteries through Zurich!!!!!!

7/22/2010
planemad (100%)
are the modules fitted with a "CE" label to show EU approval? In case of an accident, some uk insurers apparently can slip out of a claim if the radio is not CE approved.

6/29/2010
rubeuhh (15%)
does it fit in a graupner mx-12?

6/16/2010
FERNANDO (60%)
I BOUGHT THE LAST WEEK A CORONA 2.4 AND I DONT LIKE THE ITEM BECAUSE I NEED TO LINK EVERY TIME WHEN I PUT OFF AND PUT ON THE TRANSMITER AND THE RECIVER* IS DIFERENT TO SPCTRUM BECAUSE THE SPCTRUM YOU MADE THE LINK AND YOU DON'T NEED ANY MORE TO DO A NEW LINK* SOMEBODY CAN TELL SOMTING ABOUT ?

5/9/2010
bruno (25%)
any body try it with mc16/20 ? or with another module ? please help!!!

epo flyer (17%)
it works

Goose (77%)
It works with the mc 16

5/3/2010
Reinhard (85%)
Which channel of the reciver belongs to which servo or gyro?
I mean for example channel 1 of the reciver belongs to the gyro.
Sorry for bad English

Reinhard (85%)
I found it out now:
channel 1 belongs to servo I
channel 2 belongs to servo II
channel 3 belongs to Brushless Controller
channel 4 belongs to gyro
channel 5 belongs to gyro signal
channel 6 belongs to servo III
channel 7 and 8 are aux-channels

hubben (55%)
This is dependant of the radio you put it in. Normally channel 4-5 is rudder gyro gain, but that varies from radio to radio.

Goose (77%)
my radio must be the same as "hubben's"

4/7/2010
Rizza83 (75%)
hi can anyone tell me if this module will work on a Hitec optic 6?
thanks

epo flyer (17%)
if it is a modular based radio

hotzenplotz (46%)
Bullschitt!!!!!!!!!1 Hi EPO FLYER in Hitec optic6 only works the Corona Futaba Modul

3/30/2010
kjb84 (55%)
I have the Turnigy 9X 9Ch transmitter and paired it with this reicever. A red light in the reciever is on when the transmitter is on.So I guess that means that its paired. But the servos is not responding in any port. Anyone familiar with this problem? Is it settings in the menu? Its on ppm.

epo flyer (17%)
try rebinding it

Rollon (0%)
did you move the throttle all the way up and then back down to arm the ESC????

3/25/2010
jerry (79%)
Does anyone know if it will work with with JR XF622, and which receiver will work with it. Seems like alot of confusing info.

3/9/2010
CAYESA (79%)
Can I use the reciver Hobby King HK-8R 2.4Ghz Receiver 8Ch with this transmitter?

Runny (49%)
Nope.
Only v2 corona receivers will do.

2/20/2010
slumberjer (90%)
Can I change mode to mode 1 with this mode 2 model?

1/30/2010
Flhyr (0%)
Does anyone know how the reported latency of 22ms compares to the big boys? It seems to me that 22 ms is an eternity, but maybe not...

12/15/2009
Thomas Pachler (33%)
HelloDoes it work with JR MX 24s

12/10/2009
Kosmakov (34%)
Does it work with "Turnigy 9X 9Ch " ?

SoMoney (49%)
CONFIRMED, Turnigy 9X Works great with Corona 2.4Ghz DSSS (Switch to PPM mode)! I can fly over 500m without glitch

10/7/2009
Josh (34%)
Will this work on the JR XP6102 TX?

rcmonger (43%)
will this work in a hitec aurora 9 transmitter?

9/24/2009
miko_mission (25%)
Hello, can anybody tell me if the transmitter module has low output 10mw(10dbm) or the normal output 100mw (20dbm. i am just wondering because i can read on serveral sides that it has only 10mw low output.

Thank you in advance
Wilfried

Nobby (-44%)
its the same as a spectrum DX6i Tx

9/19/2009
Colliefreund (25%)
Hello,

if somebody has already obstructed Corona System in a cockpit sx, perhaps, with instructions.

Greeting
Franz-Josef

9/17/2009
VinCopter (70%)
The spec stated "Voltage : 4.8 V - 6V"
Do I need to change the TX battery?

9/16/2009
Tiziano (40%)
Sorry guys what's does it mean FHSS and DSSS? and what's the difference. sorry but i am a novice in it
Alitiziano

FockeWulfTa183 (73%)
FHSS stands for Frequency Hopping Spread Spectrum. DSSS stands for Direct Sequence Spread Spectrum.

9/1/2009
Felipe (17%)
Does it works with walkera?! w-1001?
it's same jr specifications, cause i usually use jr stuff with this and works PERFECTLY!
thanks!

8/4/2009
johnkim100530 (83%)
Does this JR module antenna stay inside the TX handle?

8/4/2009
rcmaster (25%)
does this works with turginy9x??
I have to choose JR or futaba??

johnkim100530 (83%)
It works with Turnigy 9X.

Chris kyung-hyun (17%)
You have to choose Jr version not Futaba. I ordered Jr version since I ordered turginy9x. I read someone mentioning this.

7/20/2009
jeandrep (25%)
Does anyone know id this module will work on a jr 2610. The 2610 does not have that removable module at the back.

Thank you in advance

!Stephan! (64%)
try ***********rcgroups****/forums/showthread.php?t=1098611
All you will have to do is a little re-soldering.

6/22/2009
udo.w1 (25%)
does it work on mc15? maybe without its case?

6/14/2009
Guy (25%)
does this work on JR x3810? How good is it?

6/7/2009
Ranwan (45%)
I just bought this set and it is version2 .Using it with the turnigy 9x transmitter. It did bind on the first try.
1. Hold button down on module then turn on transmitter. the led should flash from red to green which means its sending signal to the reciver.
2.now hold button down on the reciever and apply power. I used a reciever batter and it will work on any channel just pay attention to polarity. the reciever light will blink twice , now unhook the battery from the reciever and turn off the transmitter.
3. turn power on transmitter and reciever and it should connect and led will stay on on reciever.

6/6/2009
SantiagoBG (25%)
Pictures shows module and receiver v1 or v2 DSSS?

Thanks.

6/5/2009
megane (20%)
Hi.Anybody know how to connect the receiver? e.g which channel is for battery which is for throtle....? I have received this module today with turnigy 9x transmitter and i have connect tha module with transmitter and nothing happende and the light of the module is off.Pls help

Kiteboard101 (59%)
I am having the same problem with the same set up: HELP PLEASE
Turnigy 9x controler and CT8J system
- I have the control on set to PPM, turned OFF
- Installed the Module and powered on the controler and nothing on the module, LED is not Red or Green just DEAD
- Turned off control and held PROG button on the module
- powered on control and released PROG button = NOTHING
- Held LINK button on receiver and powered on servos twitch but no LED response
- Turned off receiver and then the controller
- Powered on the controller and then the receiver = NOTHING
I am not getting any LED response: what is broken the module or the 9x controller? How can I diagnose the problem? How can it be fixed?

Kiteboard101 (59%)
WOW just another Broken piece of garbage

kjb84 (55%)
I have the Turnigy 9X 9Ch transmitter and paired it with this reicever. A red light in the reciever is on when the transmitter is on.So I guess that means that its paired. But the servos is not responding in any port. Anyone familiar with this problem? Is it settings in the menu? Its on ppm.

6/3/2009
zennith (54%)
Hi Does anyone try this V2 module JR DSSS on a V1 corona DSSS receiver (older version). Can it be bind and fully function properly after binding?
Can the new V2 Dsss Receiver bind with the older module V1 Dsss JR. Thanks

hotzenplotz (46%)
Only V1 with V1 or V2 with V2

5/30/2009
Ben Johnson (83%)
can this work with PCM???

jerrykl720 (92%)
PPM only

5/27/2009
WingFlyer (67%)
If you are using MODE 2 like usualy

Throttle Channel is 3

Beaufighter (25%)
MODE has nothing to do with channel setup. Mode is stick setup. A mode 1 and a mode 2 (or 3 or 4 for that matter) transmitter from same manufacturer has same channel setup. JR/Graupner usually use ch 1 for throttle, Futaba/Hitec use ch 3. It has become a somewhat standard that throttle is either 1 or 3, however.

5/24/2009
RAMSEY (43%)
What channels are batt. an throttle? please help <********-1st timer

rcmodelreviews. (90%)
This is determined by your transmitter.

On Futaba/Hitec, the throttle is channel 3. On JR it is channel 1

I'm not sure about other systems but it's likely to be either 3 or 1 because they've become the defacto standards within the industry.

RAMSEY (43%)
I have a turnigy 9x with corona module (ct8j) Thanx for the input !!!!!!!

Beaufighter (25%)
If you have the TGY 9x then throttle is ch 3. Batt is any avail, they are all connected.

5/14/2009
Olaf (40%)
Hello

Does anyone know if this module works with Futaba T10C (The name is FF-10C in Germany)? Thanks a lot for your help.
Olaf

rcmodelreviews. (90%)
This particular module won't ** it's a JR-type. It is physically incompatible.

5/2/2009
janc (25%)
Do you know if it's compatible with a Graupner X-3810 ??
Thanks JanC

4/25/2009
Schorhr (48%)
Adriano (and others) :-) , did you find out if it works with the MC-12?

4/22/2009
jbcoos (25%)
can the v1 except the v2 receiver. i want to by the v1 but i like the 2 wire receiver

ROb (84%)

Does anyone know if this will This work on an old JR X347 system ?

kwakasiki (40%)
Does this system have a C tick for operation to AUSTRALIAN standards requirements

BulletMaster (79%)
nope.. only V2 has been certified for AUS (MAAA). See the MOP.

BulletMaster (79%)
sorry... meant the V2 Assan system. This one has not had MAAA approval.

Gerald (25%)
can somebody help me? i have an old Graupner MC 16/20 with 35Mhz Modul, and i can also join from PCM to PPM.
My question is: can i also give the Corona 2.4Ghz JR Module & Rx (V1 DSSS)into my system?

hotzenplotz (46%)
Yes you can

stuk_at_work (55%)
Anyone (hobbycity!) know when the CT8J (DSSS V2 for JR) will be available from HobbyCity? It doesn't seem to make sense to buy the V1 transmitter/RX combo if you cannot buy additional receivers for it.

Click here to see all comments