Please confirm your location:


Arkansas warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the Arkansas warehouse even better value!
  Item found in the following categories;
> Electric Motors > TURNIGY
> Electric Motors > Inrunners by size > 36 - 38mm Inrunner Motors

  RATED:

Turnigy B36-40-09 2250kv Inrunner

Turnigy B36-40-09 2250kv Inrunner

TURNIGY brushless Inrunner

Spec.
Kv: 2250rpm/v
Power: 350W
Turns: 9
Resistance: 35
Idle Current: 2.3
Esc: 45
Battery Config: 3-4S
Length: 42mm
Width: 36mm
Shaft: 5mm
Weight: 170g



PRODUCT ID: B36-40-09-2250

Kv(rpm/v) 2250
Weight (g) 170
Max Current(A) 0
Resistance(mh) 35
Max Voltage(V) 15
Power(W) 350
Shaft A (mm) 5
Length B (mm) 42
Diameter C (mm) 36
Can Length (mm) 40
Total Length E (mm) 54
Update/Add my own data
Customer Data


This product is no-longer available. CLICK HERE TO SEE A WIDE RANGE OF SIMILAR ITEMS


Related Products
Customer Also Bought
Further discounts available for registered & logged-in customers.
 Customer rated
48
crowns
  
 
Total of 3 discussions.
lapo92  57 points - 3/17/2010
 
Hello, I would mount the motor on the Pushy Cat X-models with APC 6X5,5 and 4 cell 2450...it's ok or the motor warm? It's possible to mount the -07 with 2900 kv?
Thanks
bedeaux  16 points - 9/3/2009
 
a la premiere utilisation l'aimant a eclate resultat inutilisable !
Customer Reviews
Overall Rating
John Thiele
likes
ValueUNRATED
QualityUNRATED
11 thumbs up!
More tests with a 3s lipoly 3700mah.
Graupner Watts Amps
5.5*5.5 360 32
6.5*6.5 480 43
7*4 475 45
M/airscrew Watts Amps
6*4 280 25
7*3 360 32
Close too the watts range advertised


No comments. Reply..

Overall Rating
Niko Strobel
likes
ValueUNRATED
QualityUNRATED
9 thumbs up!
I tested the motor using a 3 cell LiPo with 4300mAh from X-Cell.
With a 7x7 APC Sport propeller it is at 50A @ 11V, so about 550W input power. Motor is up at about 15,000-16,000 RPM and is getting quite warm without airflow.
I'm aiming at using a 7x10 APC Sport propeller für high-speed flights.
Current flow should drop during flight, because the motor will spin faster (approx. 20,000 RPM).
4 Stars only, because there are no mounting parts, etc. included and there is no manual or detailed informations about max. current or best efficiency.


No comments. Reply..

Overall Rating
Customer
226 likes
ValueUNRATED
QualityUNRATED
1 thumbs up!
Great Motors - I use 2 of them in an Agitator Raceboat Catamaran (90cm hull). 100km/h plus no problem with the right propellers for these motors.
But you have to give them a fan and a good water cooling !!!


No comments. Reply..

Overall Rating
trbdsl96
9 likes
ValueUNRATED
QualityUNRATED
1 thumbs up!
Using this motor on a G.W. Kwik-E. With a 9x5 folding prop it pulls 52amps 530watts on 11v. On a fresh pack it pulls a little more. The Kwik-E has large cooling holes in the design so heat isn't really a problem. You do have to make a new firewall though. The bolt pattern is different.


No comments. Reply..

Create an account
Overall Rating
kp647
10 likes
ValueUNRATED
QualityUNRATED
1 thumbs up!
These 36mm turnigy inrunners have great apllications for 90mm edf use , this one is good for 4s use on a 90mm edf


No comments. Reply..

.....click here to see all reviews
Aff. Link