|
8/13/2010
Panikatak (40%)
Good item tnx hobbyking
|
|
|
 |
|
|
 |
|
7/17/2010
tayothin (50%)
Can it work with Turnigy Accucel-6 50W 6A Balancer/Charger w/ accessories ?
|
|
|
| |
|
Francisco
(63%)
Hello, I just order one my self along with a Turnigy Accucel-6 50W 6A, and i have read before I purchase that it will work just fine but It will only give you 5A charge (the charger can handle up to 6A), but still it will work. It will also work with Imax B6, and HobbyKing ECO 6 chargers. Cheers
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
raul_co76
(-33%)
works perfect evens after hours of charging batteries* i have two of themand recomend it
|
|
|
|
Was this the best answer? YES | NO
|
|
 |
|
|
 |
|
7/16/2010
eder@futuraexpr (54%)
Id like to know the size of charge (length width height), because ill make a case for it. Thanks
|
|
|
| |
|
raul_co76
(-33%)
13 cms * 5.6 cms * 3 cms
|
|
|
|
Was this the best answer? YES | NO
|
|
 |
|
|
 |
|
7/9/2010
meimei (72%)
Can this power supply be used with HobbyKing ECO 6 ? thank's
|
|
|
| |
|
stlin
(67%)
Yes, it works fine with my Eco 6.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
tlrascal
(25%)
Absolutely and many other chargers. It supplies a 12V DC current that is filtered and rectified and has enough current capacity to run the charger at 5 Amps using max charging current and max voltage, a 6S pack at 5 Amps.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
raul_co76
(-33%)
worked fine on my emax b6
|
|
|
|
Was this the best answer? YES | NO
|
|
 |
|
|
 |
|
1/21/2010
gerald (22%)
Can this power supply be used with iCharger 106B-plus?
|
|
|
 |
|
|
 |
|
12/15/2009
Ron (63%)
does it convert the dc into ac so you can plug it into your wall outlet at home?
|
|
|
| |
|
whitesummitnut
(59%)
It converts ac to dc that the charger uses
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
whitesummitnut
(59%)
It converts ac from the wall outlet to dc that the charger uses
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
Niels
(54%)
It converts the AC power in your home into DC for use with chargers etc.
|
|
|
|
Was this the best answer? YES | NO
|
|
 |
|
|
 |
|
12/4/2009
xxgg2 (47%)
Can this Power Supply give enough voltage to fully charge 11.1v LiPo ?
|
|
|
| |
|
rudeboy
(65%)
Yes, it will supply enough voltage. There is a step up unity inside, so you can charge even 6s batteries.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
rudeboy
(65%)
Yes, it will supply enough voltage. There is a step up unity inside the charger, so you can charge even 6s batteries.
|
|
|
|
Was this the best answer? YES | NO
|
|
 |
|
|
 |
|
9/17/2009
Diunior (44%)
Can I use this with Turnigy Accucel-6 50W 5A Balancer/Charger http://www.hobbyking.com/hobbycity/store/uh_viewItem.asp?idproduct=7028 ??? Thanks! Regards!
|
|
|
| |
|
Tequilla
(79%)
Yes you can...
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
Ebiker
(12%)
yeas I'm using it with it.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
Andreas
(80%)
Yes, you can but It will only give you 5A charge (the charger can handle up to 6A), but still it will work.
|
|
|
|
Was this the best answer? YES | NO
|
|
 |
|
|
 |
|
7/22/2009
Hiroshi (63%)
Hello people: I recently bought the Turnigy Accucel-6 50W 5A Balancer/Charger, I would like to know if the plug of the IMAX Power Supply 100~240v 5A will fit the charger? Let me people please! thank you..
|
|
|
| |
|
Ebiker
(12%)
fits right in.
|
|
|
|
Was this the best answer? YES | NO
|
|
 |
|
|
 |
|
7/12/2009
David (63%)
I'm new to R/C and I picked this up to power the Turnigy Accucell-8150. How do you plug it into the Turnigy? With NO instructions with the Turnigy and NO power supply directions in the manual from this site how do I hook this up? The plug on this will not match any of the plugs that came with the Turnigy. Please help!
|
|
|
 |
|
|
 |
|
5/26/2009
SILAR (52%)
I am a beginner. When the spec says "The Turnigy Accucel 6 is an entry level balancing charger and discharger which can handle up to 6 cells and 5A.", this means up to 6 diffrent "batteries" or one battery with 06 cells ("modules") ? I have one "battery" NiMh 2700, 8.4V with 07 "modules" 2700,1.2 V* it can be charged/balanced/cycled/discharged with TURNIGY 6 ? and I can use this Imax power supply ?Thanks in advance
|
|
|
| |
|
Beaufighter
(-31%)
6 cells is 6 cells, not six batteries. Here it is meant 6 LiPo cells. It can charge/discharge/balance up to 15 NiCd/NiMh cells. This powersupply is ok, but it is designed for the Imax chargers, and has a plug for that charger, not the Turnigy. There is another 5A powersupply (searc for "12V 5A Power Supply") for ~1/2 of the cost avail here, that will do the same job:)
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
SILAR
(52%)
Thanks a lot Just to put it very clear to me : you mean a Lipo battery composed of 6 cells * a NiCd/NiMh battery composed up to 15 cells. Is that correct ? In this case, the Turnigy 6 is good for that or I'll need a Turnigy 8 ?
|
|
|
|
Was this the best answer? YES | NO
|
|
 |
|
|
 |
|
4/1/2009
joemanner (80%)
**-Calculation of the Charge current**-
The spec says: Output 15V * 5A, so output power is 75W
The charger has an efficiency of approx 80%, so you can charge max 0.8*75W = 60W into your batteries.
Calculation of the max charge current:
2s battery- 60W / 8.4V = 7.1A 3s battery- 60W / 12.6V = 4.75A 4s battery- 60W / 16.8V = 3.55A 5s battery- 60W / 21.0V = 2.85A 6s battery- 60W / 25.2V = 2.35A
I hope this solves many questions. Regards, Joe
|
|
|
 |
|
|
 |
|
ziad (63%)
would this power supply work with the triton charger & will it charge a 3s 5000 mah. thanks.
|
|
|
 |
|
|
 |
|
ketnet (67%)
does it give the 5Amps it says? i want to charge 6S 5000mah lipos with it! on turnigy charger Accucell 6
|
|
|
| |
|
Beaufighter
(-31%)
Yes, it does give 5A max, but at 12V. But if you are charging at a higher voltage, the supplied current must be higher at 12V... (the charger can supply the higher voltage, at a higher current draw at the input) So to charge a 6S (~25V) battery at 5A with a 12V supply, twice the current is needed, 10A minimum (in addition to heatloss etc in charger...)
For charging more than 3S, I'd recommend a supply with a higher voltage (min 18V) and higher current.
|
|
|
|
Was this the best answer? YES | NO
|
|
 |
|
|
 |
|
Phonic (58%)
Can this power supply work with the Imax B6 charger
|
|
|
| |
|
masciaj
(79%)
Yes it does
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
mitchell
(63%)
can it work with the i max B8
|
|
|
|
Was this the best answer? YES | NO
|
|
 |
|
|
 |
|
eviltiny (67%)
will it work with the Turnigy Accucel-6
|
|
|
| |
|
webber
(97%)
It will work for sure with any charger up to 8 cells.
|
|
|
|
Was this the best answer? YES | NO
|
|
 |
|
|
 |
|
rmartignoni (47%)
Does it supply enought power to GT A-6?
|
|
|
| |
|
webber
(97%)
I have GT A-6 and the power is enough. It was working for almost a year and always barely warm (as any power supply should be).
|
|
|
|
Was this the best answer? YES | NO
|
|
 |
|
|
 |
|
minitel (72%)
Will this work with the new 6s turnigy charger?
|
|
|
| |
|
webber
(97%)
It will work - you will have no problems. This one is a cheap and reliable power supply.
|
|
|
|
Was this the best answer? YES | NO
|
|
 |
|
|
 |
|
Imran (63%)
does item comes with ac cord (240v)?
|
|
|
| |
|
webber
(97%)
Yes, the input is AC100-240v (just checked mine)
|
|
|
|
Was this the best answer? YES | NO
|
|
 |
|
|
 |
|
ANTHONY (39%)
will this work with the iCharger iC6? because it don't come with a power cord/adapter plug, sad to say.
|
|
|
 |
|
|
 |
|
stacey (87%)
does item comes with ac cord (110v)?
|
|
|
| |
|
Jason5001
(5%)
Yeah it does. it comes with a USA plug, but you can easily get a cord to suit it or an adapter plug $5.00 at your hardware or electronic store. It's a non-issue
|
|
|
|
Was this the best answer? YES | NO
|
|
 |
|
|
 |