USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Electric Motors > TURNIGY
> Electric Motors > Outrunners by size > 28 to 34mm

  RATED:

Turnigy 2209 28turn 1050kv 15A Outrunner

Turnigy 2209 28turn 1050kv 15A Outrunner


Spec.
Kv: 1050rpm/v
Operating Current: 4A ~ 12A
Peak Current: 15A
Suggested prop: 9x4.7
Suggested Battery: 1300~1700mAh 3S1P
Weight: 46g
Dimensions: 27.6 x 28mm
Shaft Size: 3.175mm

Kit includes full accessories, including gold bullet connectors, prop saver, mount, spare rubber rings, shrink tube and screws.


PRODUCT ID: TR2209/28

Kv (rpm/v) 1050
Weight (g) 46
Max Current (A) 15
Resistance (mh) 0
Max Voltage (V) 11
Power(W) 0
Shaft A (mm) -
Length B (mm) 28
Diameter C (mm) 28
Can Length D (mm) 13
Total Length E (mm) 43
Update/Add my own data
Customer Data

Weight: 91g Quantity: 
stock
-4
Price$11.93


Related Products
Customer Also Bought
Further discounts available for registered & logged-in customers.
STOCK ARRIVAL ALERT

Enter your email address to get an email the second new stock arrives.
Estimated factory delivery date;
Stock usually arrives every 10-25 days.
 Customer rated
587
crowns
  
 
Total of 30 discussions.
Samee  38 points - 12/14/2013
 
wanted to use it on my trainer which waits about 1.5kg how much trust this motor it will create
 teo 57 points
i believe that this motor would be a little small for your plane. As is rated 15A it is less than 160W so more or less 600gr thrust which is .....almost at the min power to keep your plane on the air.It might can flight your model but i would suggest for a trainer with 1.5kg weight a DT 900KV Ot a DT 1000kv in order to have some more power for some dramatic moments like an emergency abort landing.
BEST ANSWER CREDIT AWARDED
Brussless  25 points - 9/25/2013
 
How would you connect this motor with 3 black wires/kabels ??????
 teepee54 14 points
Anyway you like. There is no polarity. If the motor runs backward just swap any two wires and it will run the other way.
BEST ANSWER CREDIT AWARDED
Brian  36 points - 5/27/2013
 
What is the mounting bolt hole spacing of this motor? I am looking at it for a Hyperion Yak 55 Profile I picked up and will need to use a stick mount in order to use this motor. I need to know the hole pattern size before I can pull the trigger.
Andrea  1 points - 5/19/2013
 
Hi, how muny grams of thrust can we gain from this motor?
 Pacifik 16 points
Prop Thrust(g)/Temp(C)/Amps/Volts/Watts 10X4.7APC 900 42,3 18,38 10,96 206,4 10x3.5GP 880 41,3 17,95 11,8 201,3 9x4.5GP 800 38,2 15,94 11,09 179 9x3.8APC 760 39,3 13,51 11,04 152,3 8x6GP 620 35,5 10,51 11,26 119,6 8x3.8APC 620 39,2 14,1 11,08 158,2 7x4APC 440 35,4 7,18 11,39 82,2
siderat  4 points - 4/30/2013
 
Hello, I have model wingsan 96sm, weight about 550gr. 3S 950 mAh. How many approximately there will be flight time?
 Pacifik 16 points
About 4 minutes...
Customer Reviews
Overall Rating
Edney Halaginski
likes
ValueUNRATED
QualityUNRATED
45 thumbs up!
I've done a battery of test with some different props size.
For this motor I got these results:
Prop Thrust(g)/Temp(C)/Amps/Watts
10X4.7APC 900 42,3 18,38 10,96 206,4 10x3.5GP 880 41,3 17,95 11,8 201,3
9x4.5GP 800 38,2 15,94 11,09 179
9x3.8APC 760 39,3 13,51 11,04 152,3
8x6GP 620 35,5 10,51 11,26 119,6
8x3.8APC 620 39,2 14,1 11,08 158,2
7x4APC 440 35,4 7,18 11,39 82,2


No comments. Reply..

Overall Rating
Orestes Guidali
likes
ValueUNRATED
QualityUNRATED
15 thumbs up!
Excelent motor, I put in the model with weigth=800g, propeller APC9X6E,2200 mA-3S-20C Hextronics battery the current is 13A, the fly speed is 80 Km/h, meassured by radar pistol.


1 comment. Reply..

Overall Rating
AndreasL
25 likes
ValueUNRATED
QualityUNRATED
6 thumbs up!
This is a great little motor!
I use two of them with a APC style 9x6 prop and a plush 18A speed controller each in my MPX twinstar II for FPV. The performance is very good and - together with the ZIPPY Flightmax 2200mAh 3S1P 15C Lipo which you can also buy here at Hobbycity - I get flightimes of over 10 Minutes.
I highly recomend that motor!


No comments. Reply..

Overall Rating
Scott
likes
ValueUNRATED
QualityUNRATED
5 thumbs up!
Nice motor, nice machining. Mine weighed in at 49g with supplied connectors soldered on.

Pulled 13.8A with 3S 1000Mah Lipo and 10x4.7SF APC prop. About 125watt from memory, Gets hot on the bench static. Maybe no enough airflow on bench or bit too much prop. Will fly on weeked and see how it goes on my PA Electric Shock.


1 comment. Reply..

Create an account
Overall Rating
__cata
63 likes
ValueUNRATED
QualityUNRATED
4 thumbs up!
good motor for my alha models. 5 stars


No comments. Reply..

.....click here to see all reviews
Aff. Link