USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
Are these available in a counter rotating form? I find that the counter clockwise motors loosen the nuts even with lock-tight blue on them, the accelerating/decelerating motors work the screws loose.
Weight ~28.7g. Depth of hole in collet back ~13.9mm. Distance from collet back to back of prop ~16.0mm Length of collet and threat back to tip ~46.1mm Length of shaft and threat from prop back to tip of threat ~30.1mm.
Does this one fit the Turnigy D3548/6 with the Turnigy Ultralight Wood Propeller 10x6?
http://www.hobbyking.com/hobbyking/store/__18 236__Turnigy_D3548_6_790KV_Brushless_Outrunner_Motor .html?strSearch=turnigy%20D3548
http://www.hobbykin g.com/hobbyking/store/__26520__Turnigy_Ultra_light_w ood_propeller_10x6_DE_Warehouse_.html
why are these 5mm so much more expensive than the rest of the collet types? and what ever happen to the days when you could buy a bag full of these for under 5 bucks
INDEED 8MM. APC-E PROPELLERS MUST BE DRILLED SINCE INITIAL HOLE IS TOO SMALL
Customer Reviews
Overall Rating
Skandinavian
likes
Value
UNRATED
Quality
UNRATED
5 thumbs up!
Fits perfectly to APC-E propellers, cant complain about it. It must be newer revision of item.
1 comment. Reply..
Overall Rating
Paul Hinson
likes
Value
UNRATED
Quality
UNRATED
3 thumbs up!
What otherwise is a great adaptor the shaft is even too short to fit a 10" apc prop and the supplied spinner. Likewise the fitting of a back mounted plastic spinner is doubtful.
Another 10mm longer shaft would get 5 stars. If too long one can always cut if off but .........
1 comment. Reply..
Overall Rating
Jon Deece
likes
Value
UNRATED
Quality
UNRATED
2 thumbs up!
Great adapter used on a Power 15 Outrunner. I really like the idea of a nut holding on the prop instead of the Spinner. It even looks good on the front of the Plane.
No comments. Reply..
Overall Rating
RAS
likes
Value
UNRATED
Quality
UNRATED
2 thumbs up!
it doesn't fit APC-E & JM prop! these prop hole must be enlarged to fit this shaft adapter. more details on dimension/size and weight very much appreciated.
No comments. Reply..
Overall Rating
cmartin
182 likes
Value
UNRATED
Quality
UNRATED
2 thumbs up!
This shaft adapter is working OK on my motor, just take care not to overtight the nut as it is made of steel while the rest of the adapter is made of aluminum, therefore you can strip off the threads if not careful enough.
Mechanisation and surface finish are very good, people ask you where you bought it.
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
.jpg){kind=small}
.jpg){kind=small}
