|
7/27/2010
edkhan (100%)
Does Turingy makes an equivalent Motor?
I am planning to use it in the fun jet. Any ideas. Its in the mail. And I am wondering if I can mount this motor on the existing mount on the fun jet, for extra push:) Fun jet seems to be a promising plane for upgradationg. Any responce would be welcome...
|
|
|
 |
|
|
 |
|
9/14/2009
a_pilot (70%)
Mine came with a prop saver, but I can't see how to mount it. Can a prop saver be used on this motor?
|
|
|
| |
|
nemo4all
(60%)
Yes you can surely use a prop saver on this motor...
The only thing you will have to do is reverse the motor shaft...
Then the shaft will be extra from the other side instead of what it is now...
Then you can put the prop saver on it...:)
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
8/23/2009
Javierete (67%)
Hi! Csn this motors be powered with 4S lipo ?? I'm planning to have in my mikrokopter with 10x47
|
|
|
| |
|
nemo4all
(60%)
No plz do not power it with a 4s lipo...Else you will fry the motor... :(
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
6/10/2009
keyman (97%)
The KV/RPM
|
|
|
| |
|
JRBeaman
(86%)
Rating: 924kv
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
6/10/2009
Gttronics (34%)
Hi, whats the difference between this motor and the 20 20L?
|
|
|
|
|
|
|
|
|
Philip (34%)
I notice that the wires are not color coded. Hiw can I tell the correct hook-up? I notice a shafdt on the frant and back of the motor. Are both of these part of the motor? Do I have the option to remove on for more clearance. I will be using this in an old Oly II Glider.
|
|
|
| |
|
Sterling
(65%)
Not sure about the shaft, but you just hook up the wires and check the rotation. If it's spinning the wrong way swap any 2 wires. That's it.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
a_pilot
(70%)
Are you refering to the picture where you see the prop shafts on front and back? You wouldn't actually do that. I think the picture is just showing you that you can use either side of the motor.
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
alex242 (60%)
Does this motor can be mounted behind firewall? I want to try this on a glider with 9x6 folding prop, but want it inside cabin. It cames with spare shaft?
|
|
|
| |
|
drdiscus
(66%)
I have used one in an eflite ascent it has clearance to run. Yees has a spare shaft. The motor can turn a 9x6 folding with ease on 3 cell lipo. Need a 20 or better yet a 25 amp esc.
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
Eseck90 (94%)
???? is there anybody out there??
|
|
|
| |
|
Beaufighter
(25%)
Probably no one that have tried... See a couple in the reviews that are using 12x6 folding (one on 3S), and a couple using 2S, so if you go 2S and a 12x6 it will probably work out ok! Maybe the SF will be a bit too tough, it may need an E prop. Use a powermeter and test before flying is my advice:)
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
Eseck90 (94%)
This motor wont run a 12x6 prop would a 2 cell be the answer?
|
|
|
| |
|
drdiscus
(66%)
the motor on 2 cell would best turn an 11x5.5. If you have a watts up you can tell better. My opinion is it will turn a 12x6 but it will heat up.
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
Eseck90 (94%)
Can I use this motor on 2 cells? I want to use a 12x6sf prop, is this possible, or will I burn the motor? Thank you for any help!
|
|
|
| |
|
webber
(98%)
My advice is to use this motor with 3S, if you are up to save weight, I can tell you that 10x47 and 15C lipos work fine. This motor is a screamer (in its class, when is used on 3S)
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
JERRY (34%)
HOW DO I CANCEL THIS ITEM
|
|
|
| |
|
Eseck90
(94%)
You dont.
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
