Please confirm your location:

Arkansas warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the Arkansas warehouse even better value!
  Item found in the following categories;
> Electric Motors > TURNIGY SK3 > 35mm
> Electric Motors > Outrunners by size > 35 to 44mm


Turnigy Aerodrive SK3 - 3542-1185kv Brushless Outrunner Motor (EU Warehouse)

Turnigy Aerodrive SK3 - 3542-1185kv Brushless Outrunner Motor (EU Warehouse)
Turnigy Aerodrive SK3 - 3542-1185kv Brushless Outrunner Motor (EU Warehouse)

Turnigy SK3 Motors are the next leap forward in motor quality and design. We instructed the engineers to source the best quality magnets, bearings and materials available to them and develop a motor that would not only rival, but surpass the quality of many leading motor manufactures on the market today.

The result is an efficient, high caliber motor using quality double shielded bearings, sintered Neodymium magnets and a string wound stator ensuring an accurate and consistent winding each and every time.

The Turnigy SK3 motors are suited to modelers who are seeking a quality brushless motor without compromise.

Turns: 10T
Voltage: 3~4S Lipoly
RPM/V: 1185kv
Internal resistance: 0.024Ohm
Max Loading: 49A
Max Power: 730W
Shaft Dia: 5.0mm
Bolt holes: 25mm
Bolt thread: M3
Weight: 141g
Motor Plug: 3.5mm Bullet Connector

PRODUCT ID: SK3-3542-1185

Kv(rpm/v) 1185
Weight (g) 141
Max Current(A) 49
Resistance(mh) 24
Max Voltage(V) 15
Power(W) 730
Shaft A (mm) 5
Length B (mm) 43
Diameter C (mm) 37
Can Length (mm) 22
Total Length E (mm) 64
Update/Add my own data
Customer Data

Shipped from:
European Warehouse



  • Turnigy Aerodrive SK3 Motor Accessories 3536/3542/3548 (EU Warehouse)

    Combo Price: $5.08   IN STOCK
    Add to Cart

Further discounts available for registered & logged-in customers.
 Customer rated 0 crown   
Total of 2 discussions.
andriy  1 points - 2/9/2014
Does anybody know max thrust g? Can compose 3S 30C 12*6 or 12*7 with this motor? Max prop?
 FranzB 23 points
I fly this motor in an EDGE 540 (flying weight approx 1250g) with a 12 * 6 prop and 4000mAh 3s Lipo. The power is with this config about 500W at siner current consumption of about 48A. The EDGE increases so infinitely vertically.
RCFox  27 points - 5/6/2013
Wich motor should i use for that motor?
 Schrumpfmuffe 11 points
you should take the motor... :-)
Customer Reviews
There are currently no reviews for this product.
Be the first to review it by clicking the link above!
Aff. Link