Please confirm your location:

Arkansas warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the Arkansas warehouse even better value!
  Item found in the following categories;
> Planes & Parts > Scale
> Planes & Parts > All Planes


DHC-2 Beaver EP/GP .46 Size (Kenmore Air) 1620mm (ARF) (US Warehouse)

DHC-2 Beaver EP/GP .46 Size (Kenmore Air) 1620mm (ARF) (US Warehouse)
DHC-2 Beaver EP/GP .46 Size (Kenmore Air) 1620mm (ARF) (US Warehouse)

The DH Beaver is without doubt one of the most widely know STOL "bush planes" and has become an aviation classic, good looking, powerful, tough and very capable, the Beaver was ideally suited to operating in the most hostile of conditions. As it could also be fitted with floats or skis, the Beaver became a hugely popular workhorse with both Civilian and Military Operators, despite a slow start, the Beaver became a huge sales success and ranks as one of Canada's most successful exports.

This Beaver is modeled in the "Kenmore Air" scheme and has a superb, high detail scale finish. The airframe is nicely constructed and the covering expertly applied. This model features printed rivets and panel lines on the covering providing an ultra-realistic finish. This gives you a truly fantastic looking scale model that any pilot would be proud to own. With a 1620mm wingspan, the Beaver is a great size and has tons of presence both on the ground and in the air.

This model can be finished in both electric or glow configuration. The windshield doubles as a removable magnetic battery hatch allowing for easy access to the inside of the model - perfect for accessing your flight battery when used in an electric configuration.

The Beaver of course was famous for its superb STOL characteristics and this model is no exception. Landings are a breeze thanks to the large wing area and stable slow-flight characteristics. This fantastic looking DH Beaver is such a pleasure to fly and is very practical, the perfect every day model for even the most demanding RC scale pilots!

• High Level of Scale Detail
• Beautifully Printed Scale Rivets and Panel Lines
• Functional Cockpit Door
• Nicely Finished Glass Fiber Cowl
• Tough Under-Carriage and Steerable Tailwheel

Wingspan: 1620mm
Length: 1115mm
Flying Weight: 2700~2800g

All Hardware

Your Own 5~6 Channel TX/RX
.46 Equivelent Brushless Outrunner Motor
4~5 x Standard Size Servo
3300~4000mAh 4s Lipoly Battery
11x6~12x6 Propeller

PRODUCT ID: 341000003

1 1:IC/2:Elec 4 Channel 1620mm (63.78in) 1115mm (43.90in) 2800g (6.16lb)

Weight: 4920g
USA West Warehouse
USA East Warehouse In Stock View Item
International Warehouse In Stock View Item
Price  $147.62

  • Turnigy nano-tech 1450mAh 2S1P 20~40C LiFePo4 Receiver Pack (US Warehouse)

    Combo Price: $9.03   IN STOCK

  • Turnigy nano-tech 1500mAh 2S1P 20~40C Lipo Receiver Pack (US Warehouse)

    Combo Price: $8.91   IN STOCK

  • HobbyKing™ HK15138 Standard Analog Servo 4.3kg / 0.17sec / 38g (US Warehouse)

    Combo Price: $3.21   IN STOCK

Further discounts available for registered & logged-in customers.

Enter your email address to get an email the second new stock arrives.
Estimated factory delivery date;
 Customer rated 4 crowns   
Total of 13 discussions.
Tim  1 points - 5/28/2014
does this plane have flaps?
 crashman68 46 points
no it does not
YellowCanopy  5 points - 11/22/2013
flaps ready?
 larryoakley 47 points
no Flaps
Jeremy  4 points - 10/27/2013
will a O.S 40 be ok for this plane?
 larryoakley 47 points
I think a 40 will be under power, at least a 46 is the best option
vieuxdruide  25 points - 10/3/2013
hi yes you have just the motor the servos and the propeller to buy.. regards
imperadorio  14 points - 5/17/2013
Does plane come with pushrods? Is there any extra hardware should I buy? Regard folks.
 larryoakley 47 points
it comes with all the hardware (pushrods included) no extra hardware needed
 artimus55 29 points
Always up grade the hardware on any HK plane its is cheap and weak and will break on hard maneuvers . Had it happen on 3 planes. I was lucky to save the planes. Use dubro hinges and control horns you will be much happier.
Customer Reviews
Overall Rating
Like it?
I ordered this plane and received it in great condition. It is a really nice plane, nicely finished. Have not flown it as yet. I did however order a set of 60 size floats from Hobby King for it. The floats came with no damage to the shipping cartons. However, one float has a 1 1/2 inch crack on it. I contacted Hobby King about it, and after sending 22 pictures of the cartons and the floats, Hobby King decided to give me a $5.00 store credit!!! It cost me $49.00 for the floats, and $53.00 to ship to the U.S.A..... And they want me to take a $5.00 store credit???? Be careful of products from this supplier! They obviously have NO Quality Control procedures set up. The float was SHIPPED to me damaged BEFORE it ever went into the cartons!!! F.Y.I.....

10 comments. Reply.. here to see all reviews
Aff. Link