USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
NTM Prop Drive Series 35-30A 1400kv / 560w (USA Warehouse)
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from design right through to shipping the product to you. The removal of middle-men has meant we can drive better value to the market and retail these motors at factory(our) prices! All performance figures are real and tested on our own motor dynos. Our QC engineer checks and balances each motor before shipping to the HobbyKing.com warehouse.
3s, APC 10x7e sf ,turnigy trust 45amp esc factory settings on the epp fpv. elogger v4 showed peak amps at 75 , peak watts at 900. motor burned up and will not work. what did I do? prop maybe?
You definitely over-propped. Motor is rated for 41amps of max current. With your system drawing 75amps is no wonder it fried. Use APC 10x3.8 and you should be golden. Also make sure your lipo can withstand at least a 45-50amp continuous draw. At least 25c 2200mah.
yes it can u judt need to put a wheel collar on the back of the shaft
Customer Reviews
Overall Rating
John
7 likes
Value
Quality
Like it?
Fist thing is, this motor does not come with a prop adapter or a motor mount. If you want to run this as a pusher you will need purchase a special prop adapter that mount with 3 screws to the motor body itself. Really need a motor mount. It has a strange pattern that will not work with standard X mount. The motor runs smooth and quite. This is what I found on a 3 cell 40c lipo. Each run was 5 seconds long
This is the second NTM 3536 I received. The first did not work and twitched back & forth (bad lead). The second I mounted in my T28 (full size) and it failed after 4 minutes. I promptly received a credit on the first motor (thank you) but the replacement I ordered failed. I am negociating a RMA.
No comments. Reply..
Overall Rating
Frank
1 likes
Value
Quality
Like it?
I am running this motor in my T-27 Tucano. This plane has a 39" wingspan & is balsa & ply construction. My setup is a 2200mah 3cell 40c lipo, Castle Creations Ice 50 ESC & a 10×7 prop. On my data log I pull at full throttle almost 50 amps & just over 600 watts. The motor never has got hot & I don't baby the throttle. Flying time is about 6-8 minutes. Definetly a good buy & tons of power
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
