The AXN Floater jet is a perfect model for beginners. Its stable flight characteristics and forgiving handling make it the perfect platform for learning to fly. Unlike some models in its class the AXN Floater-jet comes with ailerons right out of the box. This is a critical control surface that all budding pilots should master.
Constructed from strong EPO foam with a high gloss finish the AXN Floater-Jet is capable of achieving high speeds in a small amount of space or gliding around gracefully on the breeze only needing throttle to gain altitude.
The predictable flight characteristics, low wing loading and pusher prop also make the AXN Floater-Jet an ideal platform for FPV. Using a smaller battery such as a 1600mAh to 1800mAh 3S1P will allow for additional payload in the front of the aircraft and make finding the correct CG without having to add additional tail weight easy.
The suggested motor and 5x5 propeller offer both performance and flight time based on your flying style. You will require a 2100kv Brushless outrunner, 4 x 9gram servos, a 1600mAh~2200mAh 3S1p Lipoly battery (depending on payload requirements) a 20Amp ESC and your own transmitter and receiver (Tx/Rx) to complete this model.
Proven time and time again the AXN Floater-Jet ticks all the right boxes for anyone looking to get in to the hobby as a beginner or intermediate pilots looking to get in to the exciting world of FPV flying.
Specifications:
Wingspan: 1290mm
Fuse Length: 860mm
Motor: 2100Kv Outrunner (not included)
Propeller: 5x5inch x (2pc included)
ESC: 20A (not included)
Servos: 4 x 9g servo (not included) for Rudder, Elevator, 2x Aileron
Required:
Your own RX/TX
20A Brushless ESC
4 X 9g Servo
1600~2200mAh 3s Lipoly
2100kv Outrunne
PRODUCT ID: AXN-C-KIT
| 
.jpg)
.jpg&width=48)
.jpg&width=48)
.jpg&width=48)
.jpg&width=48)
.jpg&width=48)
.jpg&width=48)
.jpg){kind=small}
