NTM Prop Drive Series 35-36A 1800Kv / 875w (AUS Warehouse)

Location: UNITED STATES

TOTAL $0.00 QTY 0

Planes & Parts

Helicopters & Parts

Multi-Rotors & Parts

Cars & Parts

Boats & Parts

Bikes & Parts

Scale R/C Tanks

FPV & Telemetry

Batteries & Accessories

Chargers & Accessories

Electric Motors

Speed Controllers

Robotics & DIY

Servos & Parts

Radios & Receivers

Gas/Glow Engines & parts

UBEC & Regulator

Power Systems

Hardware & accessories.

Tools

Clothing, Gift & Acc.

Sale/Liquidation


Language
Currency

	USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!

Item found in the following categories;
> Electric Motors > Outrunners by size > .15 - .40
> Electric Motors > NTM Series > 35mm

RATED:


	NTM Prop Drive Series 35-36A 1800Kv / 875w (AUS Warehouse)

NTM Prop Drive Series 35-36A 1800Kv / 875w (AUS Warehouse)

NTM Prop Drive motors are rock solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.

Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from design right through to shipping the product to you. The removal of middle-men has meant we can drive better value to the market and retail these motors at factory(our) prices! All performance figures are real and tested on our own motor dynos.

Our QC engineers check and balance each motor before shipping to the HobbyKing.com warehouse.

Specs:
Model: NTM Prop Drive 35-36A 1800
Kv: 1800rpm/v
Max current: 65A
Max Power: 700W @ 12v (3S) / 875W @ 15v (4S)
Shaft: 4mm
Weight: 120g
ESC: 70A
Cell count: 3s~4s Lipoly
Bolt holes: 18.9mm & 25mm
Bolt thread: M3
Connection: 3.5mm Bullet-connector
Suggested Prop: Prop test data coming soon!

A great plane motor up to .30 size.

PRODUCT ID: NTM3536A-1800

This product available from a warehouse near you!

Kv (rpm/v)	910
Weight (g)	117
Max Current (A)	35
Resistance (mh)	0
Max Voltage (V)	11
Power(W)	720
Shaft A (mm)	4
Length B (mm)	38
Diameter C (mm)	35
Can Length D (mm)	23
Total Length E (mm)	58

Update/Add my own data
Customer Data

147g

$18.79

acc.

NTM Prop Drive 3536A Series Replacement Shaft (AUS Warehouse)
Combo Price: $1.32 IN STOCK
NTM 35 Motor Mount Spacer/Stand Off 10mm (4pc) (AUS Warehouse)
Combo Price: $0.83 IN STOCK
NTM Prop Drive 35 Series Accessory Pack (AUS Warehouse)
Combo Price: $2.05 IN STOCK

Further discounts available for registered & logged-in customers.

STOCK ARRIVAL ALERT

Enter your email address to get an email the second new stock arrives.
Estimated factory delivery date;

Customer rated

4 crowns

Total of 2 discussions.

Harry05

16 points - 9/19/2012

Are there any suggested prop sizes for this motor, any ideas?

KaosKane

1428 points

video is out there showing test with 7x6 apc sport at 61A on 4cell

Ral fRotten

1073 points

A few people have used 8x4 3blade with 3s battery's on these in the Hobbyking fpv 168 with no problems, I have the same set up on my fpv 168 but it's not finished yet so I can't give you figures,

BEST ANSWER CREDIT AWARDED

Ral fRotten

1073 points

The product config table is for a 910kv motor not the 1800kv motor

KaosKane

1428 points - 9/12/2012

max amps 65 in specs and 35A on product table and still no prop data

Ral fRotten

1073 points

watts / volts = amps 700w/11.1v = 63.06amps 875w/15v = 58.3amps (NOT 35amps)

BEST ANSWER CREDIT AWARDED

Ral fRotten

1073 points

The product config table is for a 910kv motor not the 1800kv motor

Customer Reviews

Overall Rating		3/14/2013 Harry05 15 likes
Value
Quality

Like it?

Well so far so good, i have mounted this motor in the 1000mm SBach 342 from this site. running a 2200Mah 3s, Been spinning 11*6 prop and was an absolute missile but only get 4.5mins flight.. (havent got specific data) Going to try an 8*8 apc prop (around 600w @60A), see how that goes. Have also ordered a 5000mah 3s battery to trial, hoping to get more flight time..

1 comment. Reply..

.....click here to see all reviews

Aff. Link

Home Account News Careers Sponsorship Map RSS Contact

NTM Prop Drive Series 35-36A 1800Kv / 875w (AUS Warehouse)

NTM Prop Drive 3536A Series Replacement Shaft (AUS Warehouse)

NTM 35 Motor Mount Spacer/Stand Off 10mm (4pc) (AUS Warehouse)

NTM Prop Drive 35 Series Accessory Pack (AUS Warehouse)