USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
NTM Prop Drive Series 35-36A 910Kv / 350W (AUS Warehouse)
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings, tool-steel shafts plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from design right through to shipping the product to you. The removal of middle-men has meant we can drive better value to the market and retail these motors at factory(our) prices! All performance figures are real and tested on our own motor dynos.
Our QC engineer checks and balances each motor before shipping to the HobbyKing.com warehouse.
Model: NTM Prop Drive 35-36A 910 Kv: 910rpm/v Turns: 10T Max current: 38A Rated Power: 350w Shaft: 4mm Weight: 117g Bolt holes: 18.9mm & 25mm Bolt thread: M3 ESC: 30A Cell count: 3S Lipoly Suggested Prop: 10x4 Efficiency: 83% A great plane motor up to .30 size.
No it is definitely a 4mm shaft. Just bought 2 of these and the 4mm adapter fits perfectly... I the accessory kit the 6mm shaft bolts onto the rear of the motor not the shaft itself.
yes they will work fine .the Low KV will be good Load carrying and Very very dangerous with its ability. ,when Making A quad with Large Motors Like this ,will also require Large Battery s and A good prop protection can be a bonus ,as learning to fly Quad in Large scale such as the size motor hear ,i also found difficult with breaking props ,and the idear of prop savers to the 35 class ,is not a good idear as the exceeding power will need very strong Mount and all through prop system ,so The 3536 can be overkill with Quads But at the moment im building Y6 Scorpion with slightly smaller class motor .it will also take them is Y3 easy .
I'm using 6 of these on my hex that I'm building at the moment. Running 12x4.5 SF props, 30A plush ESC, Autopilot UAV GPS controller, and 2 x 4500mah 45C batts in parralel (9000mah). All up it weighs nearly 4kg including camera gimbal and carries another 1kg if my calcs are correct. Can't wait until its done.
Customer Reviews
Overall Rating
5/19/2013 __gree
19 likes
Value
Quality
Like it?
Tis is a good motor. I run a 13 x 6.5 folding prop with a 40 amp Turnigy Plush ESC. it pulls 35 amps on a fresh 3S battery on the ground and about 29-30 amps in the air. I have it in my FPV Easy Glider which weighs 1.25 kg and it can climb almost vertical.
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
