Please confirm your location:

Arkansas warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the Arkansas warehouse even better value!
  Item found in the following categories;
> Planes & Parts > Sport, Aerobatic & 3D
> Planes & Parts > Parkfly & Indoor
> Planes & Parts > Almost Ready to Fly (ARF) > Sport, Aerobatic & 3D
> Planes & Parts > Almost Ready to Fly (ARF) > Parkfly & Indoor
> Planes & Parts > All Planes


HobbyKing™ Bonsai EPP Wing 600mm (ARF) (US Warehouse)

HobbyKing™ Bonsai EPP Wing 600mm (ARF)  (US Warehouse)
HobbyKing™ Bonsai EPP Wing 600mm (ARF)  (US Warehouse)

The Bonsai is a fun combat wing made from almost unbreakble EPP foam that is easy and cheap to build and will provide hours of "fly it like you stole" it fun!

Wings of course have a huge flight envelope, it's one of the reasons they are so popular, you can trickle along at walking pace, fly aerobatic or just see exactly how low 'n' fast you can get away with! Get it wrong? No problem, 5 minutes with some cyano & kicker and you are back in the air with a silly grin on your face!

With the reccomended power train, your Bonsai will have plenty of performance and won't cost the earth. You and your flying buddies can have hours of fun ripping up the sky with some high adrenalin combat flying safe in the knowledge that when the inevitable happens, you can fix it in double quick time!

Wingspan: 600mm
Length: 383mm
Flying Weight: 100g~140g

Colour Photo Manual
Fiber Tape
Ply Motor Mount
Instruction Manual

4 Channel TX/RX with delta mixing
2 x 3g~5g Servo
HK 1612 3200kv Brushless Outrunner Motor
5x3 prop
300mAh~600mAh 2s Lipoly Battery


2 1:IC/2:Elec 4 Channel 600mm (23.62in) 383mm (15.08in) 140g (0.308lb)

Weight: 882g
USA West Warehouse
USA East Warehouse In Transit View Item
International Warehouse In Stock View Item
Price  $26.04

  • HobbyKing 10A ESC 1A UBEC

    Combo Price: $6.51   IN STOCK

  • HobbyKing 1612 Brushless Outrunner 3200KV

    Combo Price: $13.61   IN STOCK

  • Turnigy nano-tech 460mah 2S 25~40C Lipo Pack (US Warehouse)

    Combo Price: $4.06   IN STOCK

  • HobbyKing® 3.7g Micro Servo .4kg .10sec/60deg

    Combo Price: $3.85   BACKORDER

  • OrangeRx R410 Spektrum DSM2 Compatible 4Ch 2.4Ghz Receiver

    Combo Price: $9.95   BACKORDER

  • OrangeRx R620 DSM2 Compatible Full Range 6Ch 2.4Ghz Receiver w/Failsafe

    Combo Price: $12.91   BACKORDER

Further discounts available for registered & logged-in customers.

Enter your email address to get an email the second new stock arrives.
Estimated factory delivery date;
 Customer rated
Total of 21 discussions.
Abel  3 points - 4/10/2015
John  3 points - 10/7/2014
Does anyone have a good suggestion for building a very slow and light setup I could easily fly in a park. I just don't have the need for speed anymore and crashing into the neighbors dog at 50 mph just wasn't as fun as I thought it would be :-) Any advice for what to buy and prop would be appreciated. Thanks
 Sam.Cee 89 points
Use a small 18 mm SK3 with a 4.5x4.5 on 2cell 800mah! Exactly what your looking for
electronicx  1 points - 8/17/2014
This little wing flies great and is durable enough for a beginner. I recommend getting some hobby wire and making some Z bend control rods rather than using the glue together factory rods. I get 10 minute flight times on the following setup. 2s 800mah battery 10a ESC Turnigy EasyMatch Park250 2200kv GWS 5x4.3
Charlie  1 points - 1/30/2014 some
gopro footage - setup in description of vid
jb1801  279 points - 12/31/2013
are you using a pusher prop, or are you changing the motor rotation ?????????????
 Isaac 83 points
A "regular" prop should be fine, as long as the numbers are facing the front of the wing. If it is going the wrong way, just switch 2 of the 3 wires on the motor. NEVER switch the prop around, there is only one way the prop can go.
Customer Reviews
Overall Rating
1 thumbs up!
Очень не плохое летающее крыло. Трудно в управлении и настройке.

2 comments. Reply..

Overall Rating
Like it?
WOW!!!, I ordered Three of these wings from the USA warehouse for me and some buddies. the The planes are made with some tough epp foam. I experimented with some power sytems untill I found the right one. AX 1806n 2500kv, with a Hobbyking 8-10a Esc. with a Gws 5030 prop. On 2s 950mah its floats nice with some Acrobatic. On 3s 850mah hold on to your socks cuz it Rocks. Motor barely got warm, Esc was begging for more. good Luck Ps the foam smells like Dead Rats.

8 comments. Reply..

Create an account
Overall Rating
Like it?
Great kit. And for $20 you really can't find cheaper fun. it comes with all of the hardware for the plane, but you have to add all of the electronics. It it a really easy build and it flies decent.

No comments. Reply..

Create an account
Overall Rating
Like it?
My son and I have really enjoyed this plane. Easy to setup. I don't care for the heat shrinked control rods. Made my own. Great flyer and takes a beating!!

No comments. Reply..

Overall Rating
Like it?
Insanely fun plane, insanely cheap and an overall quality wing. I actually sold my techone popwing once this one arrived. The price is half of the techs and the quality is just as good, if not better. My setup is: turnigy plush 10amp, AX 1806N 2500kv motor, and 3s 850mah nanotechs on a gws 5030 and it screams! It will also come to a crawl if you back of the throttle and is stable as can be slow or fast. Easily reinforced with carbon fiber strips or rods if you are going to be doing combat :) A

No comments. Reply.. here to see all reviews
Aff. Link