Please confirm your location:

USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Speed Controllers > All Speed Controllers
> Speed Controllers > TURNIGY ESC
> Speed Controllers > 20 to 39 Amp
> Multi-Rotors & Parts > Speed Controller > Turnigy Plush


TURNIGY Plush 30amp Speed Controller

TURNIGY Plush 30amp Speed Controller

Plush 30 Brushless Speed Controller
The Plush series ESC are a very good quality controller. They have a broad range of programming features and a smooth throttle response compared to other BESCs in the same price range.
All our BESCs come with a full warranty.

Cont Current: 30A
Burst Current: 40A
BEC Mode: Linear
BEC : 5v / 2A
Lipo Cells: 2-4
NiMH : 5-12
Weight: 25g
Size: 45x24x11mm
User Programmable, both via controller and optional programming card. The programming card is an excellent item as it instantly tells the user the current settings and with a few simple clicks of the buttons, the user can change the settings and have graphical reassurance of those changes.
The programming card is an excellent Item and simple to use!


This product available from a warehouse near you!

Weight: 55g
International Warehouse
USA West Warehouse Out Of Stock
USA East Warehouse In Transit View Item
Price  $13.15

Related Products
Customer Also Bought
Further discounts available for registered & logged-in customers.
 Customer rated
Total of 536 discussions.
BulletRHLI  7 points - 4/5/2015
ockert  1 points - 4/5/2015
ro_HV_20A_MultiRotor_ESC_High_Voltage_3_8s.html Buy
one of the esc's as per the link above it will do the job.
JAMAL  2 points - 4/4/2015
can i use this esc for 17A motor with 6s?
 Ral fRotten 2175 points
No, upto 4s only
 ockert 1 points one of the ESC's as per the link
WillF  2 points - 3/31/2015
Would this work for a 4100kv edf running on a 3cell? Thanks in advance
 Kimmerek 330 points
The question is how many amps this 4100kv setup draw? Link here the ID of motor and propeller.
 WillF 2 points
EDF55-C20. HK claims it pulls 18Amp. I think a 30A Esc will be better suited.
 Kimmerek 330 points
There is always nice to have a 20% stronger ESC than max motor current. This 30A ESC or similar 25A ESC will work fine. Using 18A is too risky.
 WillF 2 points
For a 3gram weight increase I think 30A, but dose this ESC support high speed EFDs?
 Kimmerek 330 points
Yes, it is.
Kristinn  7 points - 3/28/2015
Does this have any connections on it?
 Kimmerek 330 points
No, you have to buy and solder connectors for battery (like XT60) and motor (like 3.5mm bullet connector). The only available plug is standard servo plug (JR), which is already soldered. 398 points
you buy the ones with the connectors sometimes the connections aren't good. if you solder yourself, you tend to solder better having a peace of mind. that was my thinking. this has been the best esc i ever had for multirotor and planes.
Customer Reviews
Create an account
Overall Rating
31 thumbs up!
Nice Speed controller,Good for KK Board quad setup .No sync issues ,smooth throttle response,Perfect!! Thanks HK

2 comments. Reply..

Overall Rating
Martin Dicks
29 thumbs up!
I bought this speed controller for my 450-class helicopter. It seems to be perfectly suited for similar helicopters (t-rex 450, zoom 400, sjm 400, ...). It weight and price is much lower than the 40 -A-version. It has 40 A peak current, which is far enough (the average consumption of the helis above is usually less than 15 A). The speed controller works perfect and has a smooth throttle curve, would buy it again (and probably will).

3 comments. Reply..

Overall Rating
Merrill Chia
13 thumbs up!
These are HobbyWing Speed controller which are absolutely fantabulous!
I love them and have almost their whole range of esc's. Use them on all my planes and have show good efficiency and reliability through the years!
If you have used hobby wing ESC's you know what i am talking about. Get a programming card as well, its super easy to use and will be worth every cent.

ONE FLAW is that the governor mode hardly works well with helicopters. Using the 40A version but without governor mode as it won't hold the headspeed up well. Using a throttle curve is safer. Either that, get a jeti or CC for heli. Its perfect if you are not doing 3D though!

2 comments. Reply..

Overall Rating
Patrick Langley
8 thumbs up!
Nice ESC, a bit of a pain to program with your transmitter, but do-able. If you do get this ESC, get the programing card, it'll make things a lot easier.

3 comments. Reply..

Overall Rating
8 thumbs up!
Excellent variateur, compatible avec la carte de prog Xpower au prix United.plusplusplusplusplusplusplusplusplusplusplusp

No comments. Reply.. here to see all reviews
Aff. Link