USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Electric Motors > KDA Outrunners

  RATED:

KD 36-12M Brushless Outrunner 1370Kv

KD 36-12M Brushless Outrunner 1370Kv
KD 36-12M Brushless Outrunner 1370Kv

SpecificationsRPM / V (Kv)BatteryOperating Current (Amps)Peak Amps (15sec)Prop
KA36-16M10503 Lipo223311?~5
KA36-12M13703 Lipo25359?~4.5

 

  KDA36-M
   Shaft Size: ƒ³5.0mm?~20mm
   Motor Dimensions: ƒ³37.4mm?~36mm    
   Weight: 116g


PRODUCT ID: KDA36-12M

Kv (rpm/v) 1370
Weight (g) 116
Max Current (A) 35
Resistance (mh) 0
Max Voltage (V) 11
Power(W) 0
Shaft A (mm) 5
Length B (mm) 36
Diameter C (mm) 38
Can Length D (mm) 17
Total Length E (mm) 56
Update/Add my own data
Customer Data

Weight: 160g Quantity: 
stock
0
Price$18.36


Related Products
Customer Also Bought
Further discounts available for registered & logged-in customers.
STOCK ARRIVAL ALERT

Enter your email address to get an email the second new stock arrives.
Estimated factory delivery date;
Stock usually arrives every 10-25 days.
 Customer rated
526
crowns
  
 
Total of 9 discussions.
Deividas  5 points - 8/26/2013
 
with two 2.2mah and with glider i flyed 1hour, powerfull motor....
Deividas  5 points - 8/26/2013
 
with two 2.2mah and with glider i flyed 1hour, powerfull motor....
camgl  7 points - 4/16/2013
 
what is the watt rating on this motor
Bsd Racing  159 points - 10/9/2012
 
Can any one tell me how far apart the mounting holes are. thanks would any one know how long it will go for on 3300mah lipo.
 Gary 3742 points
Have struggled to find the exact measurement but think it is 25mm which is standard for this size motor,should get around 12/13mins run time.
stanicaf  12 points - 9/22/2012
 
I want to know what is distance between mounting holes on the front of the engine, 19 mm or 25 mm?Thanks.
Customer Reviews
Overall Rating
Robert Fishkin
likes
ValueUNRATED
QualityUNRATED
9 thumbs up!
Great motor for my purposes..Used it on a 1800 gram home built with a Jeti 40 amp esc, an 8x6 3 blade prop on a 2250 20C 3 cell. Pulled a max of 34 amps. Flew it in too much wind for the plane but still gave me good headway. Plenty of power am ordering another.


No comments. Reply..

Overall Rating
Daniel Berroya
likes
ValueUNRATED
QualityUNRATED
7 thumbs up!
Excellent motor for the Yak 54, paired with 35 A ESC, 10x5 eprop. Goes ballistic vertical, hovers at 50pcnt throttle, 3D with authority until you turn blue in the face with excitement.

Great product, fantastic price, fast delivery and excellent customer service HC!


1 comment. Reply..

Overall Rating
Alex Puente Secanella
likes
ValueUNRATED
QualityUNRATED
5 thumbs up!
Gran motor, con muchisima fuerza.
Lo estoy utilizando para un Acormaster y va genial. 100pcntrecomendado


No comments. Reply..

Overall Rating
ROGER G
likes
ValueUNRATED
QualityUNRATED
3 thumbs up!
I USED THESE IN THE SHARK COROPLAST WING AND IT REALLY ZOOMS. USED A 9X6 AERONAUT PROP WITH THE HXT 36A ESC. RUNS FAST WITH A 2100mah 11.1V 15C 3S


No comments. Reply..

Overall Rating
Bodoegutt
15 likes
ValueUNRATED
QualityUNRATED
3 thumbs up!
Awesome motor for a great prize! Installed it on my Mini Ultra Stick, using a 35a Esc,2200mah 11.1v 20c batt. The model was airborne in 3 feet an accelerated vertically like a rocket!! WOW....
However, with a 35a Esc, and a 10x5 prop, i started to get control problems at full power. Not sure how many amp's the motor pulled, but it was more than the Esc could handle. Using a turnigy 60a esc on it now, with no control problems.


No comments. Reply..

.....click here to see all reviews
Aff. Link