Please confirm your location:



USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Batteries & Accessories > Li-Poly (All brands)
> Batteries & Accessories > 25C Discharge
> Batteries & Accessories > Turnigy nano-tech

  RATED:

Turnigy nano-tech 6000mah 3S 25~50C Lipo Pack (US Warehouse)

Turnigy nano-tech 6000mah 3S 25~50C Lipo Pack  (US Warehouse)

More than just a fancy name. TURNIGY nano-tech Lipoly batteries were designed from the ground up with serious performance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.

For those that love graphs, it means higher voltage under load, straighter discharge curves and excellent performance. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots! 

Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!

Spec.
Capacity: 6000mAh
Voltage: 3S1P / 3 Cell / 11.1V
Discharge: 25C Constant / 50C Burst
Weight: 481g (including wire, plug & case)
Dimensions: 172x48x28mm
Balance Plug: JST-XH
Discharge Plug: 4mm bullet-connector

Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.

The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.

These additives create the ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.



PRODUCT ID: N6000.3S.25

Capacity(mAh) 6000
Config (s) 3
Discharge (c) 25
Weight (g) 481
Max Charge Rate (C) 5
Length-A(mm) 172
Height-B(mm) 48
Width-C(mm) 28
Update/Add my own data
Customer Data

Weight: 583g
Quantity: 
USA West Warehouse
stock
10+
USA East Warehouse In Stock View Item
International Warehouse In Stock View Item
Price  $41.81

Related Products
Customer Also Bought
Further discounts available for registered & logged-in customers.
 Customer rated
510
crowns
  
 
Total of 12 discussions.
lance  2 points - 1/30/2015
 
will this fit in the new savage flux?
quintilio  18 points - 1/25/2014
 
Does it fit well on the Savage Flux HP battery compartment? Can I use 2 in series to get 6S power? Thanks
BananaSP  8 points - 10/20/2013
 
BUDDY CODES 39,76$, code=1632C9CC-164D-48CD-87D6-5C3E32DBDC2F
jason  2 points - 9/10/2013
 
yes you can buy the adapter i dont remember part# though.. if anything else just solder a new connector on it.. which is what i personally do..
LonnieDupont  28 points - 9/9/2013
 
Anyone know if I can change connectors to xt60
 Michael 6 points
Just buy PRODUCT ID: 601Bx5 . You need to solder with a lot of heat though to get a good joint.I recommend at least 75 watts 100 or more is better for a good melt. XT60 connectors handle the heat very well.
Customer Reviews
Overall Rating
Dustin
7 likes
Value
Quality
Like it?
I bought to of these for my traxxas stampeded VXL 4x4. Awesome battery for the price as with the other four 2S lipos I bought for my kids slash. Only problem is I should have double checked the length of my battery tray because it's a few mm to long but I make them work. They do fit however nicely in the Slash. Thanks hobby king For making these great batteries affordable ;). Shipping was fast as well.


No comments. Reply..

Overall Rating
Hogwit
33 likes
Value
Quality
Like it?
I am doing a 36 volt scooter project, and am using these as my power supply. I initially ordered 3 to not only be 100pcnt sure they fit, but also just to see how well they work. I received one dead one, but after contacting support, HobbyKing made it all better. I just ordered 4 more (3 for doubling my former capacity, and one to replace the dead one.)


No comments. Reply..

Overall Rating
Mark
1 likes
Value
Quality
Like it?
This battery is great for the money runs about 1 hr 45 m.I'm going to get another one for my slash 4x4 so I can run even longer.It makes the wheels pull off the ground even at 3/4 throttle.


No comments. Reply..

Overall Rating
Hogwit
33 likes
Value
Quality
Like it?
Bought 6 of these, one was DOA, Hobbyking resolved it quickly, and the replacement works fine. They power an electric scooter that has a 12 mile range with just those...


No comments. Reply..

Create an account
Overall Rating
BobDbc
45 likes
Value
Quality
Like it?
Nice packs. Great price, will work perfect in my FW-190 in series for a 6 cell set up and still have the use of them in other planes as single 3 cell packs.


No comments. Reply..

.....click here to see all reviews
Aff. Link