Please confirm your location:


USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Tools > Hand Tools > Soldering

  RATED:

Soldering Station with Adjustable Heat Range (US Warehouse)

Soldering Station with Adjustable Heat Range  (US Warehouse)

Soldering Station with Adjustable Heat Range

Specs Power Supply:
Power Consumption: 60W
Input Voltage: 110v
Output Voltage: 24v AC
Dimensions: 170mmx93mmx20mm
Temperature Range: 200c~480c/392F~896F

Specs Soldering Iron:
Power Consumption: 24v Ac-50w
Heating Element: Ceramic
Cord Length: 1.2m



PRODUCT ID: Sold-ST-USA


Weight: 1918g
Quantity: 
USA West Warehouse
stock
10+
International Warehouse In Stock View Item
Price $17.80

Related Products
Customer Also Bought
Further discounts available for registered & logged-in customers.
 Customer rated
557
crowns
  
 
Total of 102 discussions.
Tryin2fly  285 points - 10/7/2014
 
Well I received the new one and have been using it ever since (a week or so) doing GREAT
Tryin2fly  285 points - 9/24/2014
 
If you do a search on ebay for heating element for a Hakkoo - Yihua 936 or a 888 (I can't remember for sure?) it should come up you can also go to the Hakkoo site but I didn't have much luck on there site- I think on ebay the part # that came up was a A1321? I couldn't find anyone in the States that carries it plus I don't even know if that is the trouble so I went the warranty claim -Hope this is of some help to you - Mine stopped heating up the 4th time I used it but it was under warranty so HK sent a replacement unit -should here in a few days-I was really PLEASED HOW FAST they took care of my issues (see Below)
 alna1957 31 points
Thanks Tryin2fly, your suggestion worked and I found a couple of ceramic replacements, on ebay, for $8 and a slightly different model for $12... gotta figure out which one I need now, will check the old one before ordering. Thanks for the help!
alna1957  31 points - 9/24/2014
 
Where can one get a replacement cord-element? The white ceramic coated heater core inside the hand held part broke into small chard's so I am hooped unless I can get a new one. Currently it only gets luke warm so I can't solder anything - I really need it asap. Any help???
Tryin2fly  285 points - 9/21/2014
 
Follow up on my post (see below) Anticipating a long drawn out warranty clam and jumping thru hoops (After reading other peoples experience ) for a warranty clam I contacted Customer Service about the next step in fixing or replacing the Item I HAVE to SAY it was a VERY easy process and Catharine in customer Service was FANTASTIC and responded quickly to resolve my issue!! So I do not know why the other people had such a bad time w/Service I for one believe that HK stands behind there PRODUCTS as well as the CUSTOMERS even AFTER the SALE I know it was only $17 Item and I could have just let it go but I really like this Soldiering Station ,You hear about ALL the BAD but not much about the GOOD so I wanted to share the GOOD 100% satisfied with HKS Customer service Thumbs Up!!!!!
raytor  4 points - 9/8/2014
 
You can get spare tips from ebay. Just type in Yihua 936, solder tips and follow the links. I got mine from mainland China in 1 week (even though they said it might take 2 or 3 weeks). I got 10 tips for less than $12.00 USD....and that included shipping charges. The tips are top notch and I am very happy with this set up.
Customer Reviews
Overall Rating
Bigshou4u
113 likes
Value
Quality
2 thumbs up!
This is the same station that i have but i paid WAY more for it as i didn't know of HK at the time. It is made my Hakko (discontinued now) but i have to say that this will be the last soldering iron/station you will ever need. Heats up to your set temp in under 60 seconds and you can even lock it there via a grub crew. There are also some very cool sticker kits (skins) for it (just search for "Hakko 936 skins") I have mine with blue flames and just looks AWESOME!! Makes me want to find something to solder every time i look at it. LOL This is one purchase that will pay for itself the first time used. WARNING: DO NOT DROP IRON ON SOMETHING HARD OR PUSH HARD (you should be anyways) The Ceramic element WILL break.


5 comments. Reply..

Overall Rating
Idyllwildwild
11 likes
Value
Quality
2 thumbs up!
I have been soldering for 50 years professionally, and have just purchased the Yihua 936 soldering station from HK. The Yihua 936 is a good Hakko 936 copy/clone (the Hakko 936 has been a great soldering station that has been in commercial service for over 15 years). I have both the Hakko 936 and the Yihua 936, they are almost identical physically, however there are some differences, different color, the connectors for the soldering iron to the control station are opposite in gender, and are not interchangeable. The soldering iron holder w/sponge for the Hakko is made of metal; the Yihua appears to be a high temperature plastic. For either the Hakko or the Yihua 936, soldering iron assembly’s and tips are very low cost and available on e-bay. You can buy an iron assy. for under $6.00 and tips for $1.00 ea. When purchasing an Iron assy on e-baY, contact the seller prior to purchase and ask if the for sale iron is compatible with your Yihua 936 station, and that it is 50 watt, as there are several variations of the 936 iron, when searching for the replacement, search for "936 handle". I have tested the Yihua 936 station for temperature accuracy and stability, it under idling conditions holds /- 10DegC of set point, which is good for this type of station. The Yihua 936 appears to be a good solid soldering station and a real bargain.


No comments. Reply..

Overall Rating
Gemini
38 likes
Value
Quality
1 thumbs up!
Love thus iron but my tip is pitying and eating away? Used it a dozen times with good solder and medium heat. Where can I buy replacement tips, links please and brand, part #. Thank you


7 comments. Reply..

Overall Rating
bigmikesc10
9 likes
Value
Quality
1 thumbs up!
Wow , what can i say . The soldering station came packed in two heavy duty boxes and everything was fine,no damage .From Cal. US warehouse to TN. in just three working days . I plugged it in to make sure it worked . Heats up very very fast and fills very natural in your hand . Came as pic , base station ,three to four foot cord from iron to base and a cooling stand with spunge .Also came with directions in english and chines . You can find tips and heater elements online aka e-ay . This is a clone , but very nice . Should have gotten two at this price . Looked around and even e-ay , and this cheaper and just as nice as any of the others . Thanks hk you did it again .


No comments. Reply..

Overall Rating
trickster
14 likes
Value
Quality
1 thumbs up!
This is one of the nicest stations I have used. heats up super fast, and with the small tip it comes with you can solder the small stuff with ease. It also works great with the bigger jobs you will run across. I have used mine every day for the last three weeks without problems, if you have the money, buy two and keep one for a spare just in case, or sell it to your buddys for a profit, thay will be glad you did. Keep the good stuff coming HK.


1 comment. Reply..

.....click here to see all reviews
Aff. Link