The Turnigy 1/16th Mini Rally Extreme is packed with features. Fully adjustable suspension such as front toe in and out, adjustable shock absorber locations and preloading, adjustable chamber settings, adjustable drop height, sway bars as standard and the list goes on! The Mini Rally Extreme has all the tunability of a car twice is size and double its price allowing you to truly customize the feel and performance of your ride.
The full time 4WD transmission is delivered blistering power from the 2040-4800kv Brushless motor and 25Amp Esc combination fitted as standard, no old school brushed junk to have to "upgrade" from here!
Aggressive styling, hot out of the box performance and real tunability are set to make this one of the hottest 1/16th cars to hit the streets in 2012!
Features: Oil filled adjustable Shock absorbers Anti roll sway bars as standard Fully ball raced Light weight glass fibre chassis Tunable suspension geometry Strong 15g Steering servo Brushless power train as standard Spare Parts Available Aluminium upgrades coming soon!
Spec. Motor: Brushless Inrunner 2040-4800kv ESC: 25A Brushless 2~3S (with Reverse) Battery: 2S LiPo (103x33x27mm MAX SIZE) w/ XT-60 connector (Required) Servo: 15g Micro Drive Train: Full Time 4WD, Twin Diff with Center Shaft Slipper Clutch Suspension: Adjustable Oil Filled Length: 325mm Width: 180mm Height: 122mm (With Body Shell)
Required. 2S 1700mAh LiPo (or larger) Radio System (Rx/Tx)
Hi all, im very new to R/C car and would like to get this as my very 1st one. But i have some question before jumping to buy this.
1) What kind of battery should i use? How many do i need? If LiPO, do i need the bag?
2) Kindly recommend a good/reasonable charger?
3) Can i use this Hobby King GT-2 2.4Ghz 2Ch Tx & Rx on this car? If not, which one?
Hope to hear from the expert soon. Thanks in advance. Cheers.
1)In the beginning, you should use 2S lipo, then it's better to control. Its standing under the car ( 1700mah 2s lipo ). 2 Batteries are enough. Bag is recommend for security.
2)this one is good : Turnigy Accucel-6 50W 6A Balancer/Charger w/ accessories
3) yes it works perfectly.
any ideas of why or just luck of the draw it is as strong or stronger then the stock one i just dont get how it ****ped out already and all of the reviews that i have read on here about it were good so i just need some advice thanks
When I reverse the car turns slightly to left, forward drive is ok, how to solve this? This is my first rc car & there's so less in the manual. Any tips & suggestions for pre-drive checks & settings are welcome :)
Eu nunca comprei por aqui,mas pelo que eu sei o valor mostrado é* em dolares e é* debitado automaticamente em reais no seu cartã*o de credito.Quanto ao envio ele é* feito pelo sistema que vc escolheu na hora da compra e so quando chega no brasil é* finalizado pelos correios.Lembrando que vc corre o risco de ser taxado e ter que pagar essa taxa pra retirar o produto.
hey i have the solve to the front sway bar back plate not fitting all you need is a good hobby knife the back plate and about 5 min of time use the plate to get you outline and then just carve away till it fits flush then mount it to the fr diff with two screws one on top and the other on the opposing side on the bottom then put the ***per on and put the other 2 screws in and you done i have posted 2 pics in my al*** of what mine looks like done. give it a try its better then not using it at all ya know
hey i have another tidbit of info i use this car for off road racing and i was thinking that the sway bars that are on it were more for driving it on road so i went ahead and pulled them off and gave it a shot off road and the results were just jaw dropping its like a different car its full independent suspension now and it's performance i well worth the few min's of time that it takes to remove them give it a try and let me know what you all think thanks
i hear you there on the toddler my little girl thinks its the best thing in the world. i also found that if you get the drift wheels that gives you what you need to use 1/10 wheels and there are great buys on ebay it slowed mine down a bit but it also robbed my of torque and i built a rally co**** and me and my friends race on it and i can see the power loss so i would like to find something that would help get it back
one more thing that i would do that's real easy is take a soda bottle and cut it to fit under the diffs here is a pic of that it keeps dirt and stuff out and gives you the chance to lube it up just when you go to put it on a thin layer of rtv will seal it up well check my pics i cant get it to upload here
any of the traxxas bodys for the rally car they have will fit if you look at my pics i have the boss mustang body on mine all that you need to do to make it fit is drill new body mount holes that's all
one very important thing that i forgot to tell you was that you have to switch the rear bearing holder from side to side right to left , left to right if not then the wheel base will be to short and the rear tires will rub the body
i don't know where my message went but if you look on ebay search for E-flight park 400 heat sink i bought 2 and you also need Thermal Grease Paste i was able to pick up 2 tubes for $2.00 and thats more then i will ever use but it brought my motor temp down to the point of being able to touch it after a hard 10 min run and as far as the esc i just bought a 20mm 5v computer fan and wired it to its own on/off switch and i use a 1200mHa lipo to power it and i have not had any problems with over heating using a 3c batt give that stuff a look and see what you think i spent about $15.00 on everything
thanks thats a good idea i will have to try that i have an open port when i am not using it to power my light kit that i use when i drift with it but that's only when i have the mustang body on but good idea thanks
para comprar esse produto tem como pagar e depois que o produto chegar e que a empressa recebe,e como e os meios de pagamento a vista,tem como ser por boleto,ou so comprar por cartã*o,tenho duvidas,abraç*ã*o fique com deus!!!
hola podria hk tener en stock , cuerpos, carcazas para este hermoso auto ya que tiene muchos rayones y reparaciones el mio o decir donde se pueden comprar gracias
Wow it looks awesome! One day and out of stock! I purchase this one and battery Rhino 2s2150mah, after receiven try to drift mod.
2 comments. Reply..
Just got mine today, really impressed with all around design . It has an awesome manual in box with a decal sheet.
Shock are prefilled, servo saver, etc
chaeck out the quick video
12 comments. Reply..
Ich dürfte heute das Auto vom Zoll Abholen...es ist ein Traum..sehr gut Verabeitet. Hab nochmal alle Schrauben angeschaut und getestet...alles fest wie es sein soll.
Leider liegt viel Schnee rum das ich draussen fahren konnte nur leider etwas im Floor. Top Teil zum sehr guten Preis. Kaufempfehlung meinerseits.
1 comment. Reply..
This is a nice little car! Very good quality. The motor runs very well on 2S. Im using ZIPPY Flightmax 2200mAh 2S1P 20C. 3S is overkill.
The drivetrain and the driveshafts looks really sturdy. The shocks are also pretty good.
Buy some extra suspension arms and rear bearing holders. Alot of items are backordered lets hope HK fills up the stock soon.
Perfect for indoor areas where you can make rally/drift tracks and i cant wait to try it outdoor when all snow is gone.
3 comments. Reply..
Looks very good. Never had this cheap car and this good. I ordered 2. One came with BROKEN body. I am trying to contact HK support but no luck. Anyway wheelbase is 207mm. Tire diameter is 59mm.
GOOD product !!!