Please confirm your location:


USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Electric Motors > Outrunners by size > 35 to 44mm

  RATED:

HobbyKing 3542 Brushless Outrunner 830KV

HobbyKing 3542 Brushless Outrunner 830KV
HobbyKing 3542 Brushless Outrunner 830KV

HobbyKing 3542 Brushless Outrunner 830KV
Specs.
RPM/V: 830Kv
Cell Count: 3~4s Lipoly
Max.efficiency: 78.0%
Current at Max.eff: 36A 
Max.current: 70A
No Load Current: 1.1A/10V
Intemal Resistance: 55mOhm
Dimensions(Dia.xL): Φ35mm×42mm
Shaft: 5mm
Weight: 136g

PRODUCT ID: HK3542-830

Kv(rpm/v) 830
Weight (g) 136
Max Current(A) 70
Resistance(mh) 55
Max Voltage(V) 15
Power(W) 1035
Shaft A (mm) 5
Length B (mm) 42
Diameter C (mm) 35
Can Length (mm) 24
Total Length E (mm) 58
Update/Add my own data
Customer Data

Weight: 188g Quantity: 
stock
BK
Price$29.25


Related Products
Customer Also Bought
Further discounts available for registered & logged-in customers.
STOCK ARRIVAL ALERT

Enter your email address to get an email the second new stock arrives.
Estimated factory delivery date;
Stock updated frequently.
goods will be available within 30 days
 Customer rated
56
crowns
  
 
Total of 14 discussions.
CrashAndLearn  14 points - 5/12/2014
 
I damaged the threads on the prop adapter. Anyone know of a suitable substitute? This prop adapter has three (3) hex screws about 8mm from each other.
Chrisjon  95 points - 3/13/2014
 
How does the prop adaptor screw onto the motor, I can't see any holes in the adaptor ?
 jrestrepo777 39 points
The adaptor does not screw in the motor shaft, it fits and when you adjust the nut on the propeller side, it will tight lock on the shaft. It works similar to a drill chuck.
jamirofly  21 points - 10/22/2013
 
When is it possible to get this outrunner?
Daglas  2 points - 7/19/2013
 
Hi, the correct replacement shaft should be this one here: http://hobbyking.com/hobbyking/store/__20530_
_Turnigy_Aerodrive_SK3_3536_Series_Replacement_Shaft
_Set.html
Daglas  2 points - 7/15/2013
 
C'mon guys, I am the third one asking this - Which replacement shaft fits this motor!?!?!
Customer Reviews
Overall Rating
NoMoreGlow
35 likes
Value
Quality
Like it?
Got the motor this week and have it mounted on a very non-aerodynamic plane. Using a 11x5.5E APC prop and a 4S 4000mah pack. The planes flies very well. The motor is quiet and performs without any issues. I have not seen any overheating with the motor pulling about 500w at full throtle. From my bench tests, it appears that the motor can handle more power but I have limited it to 600w based on the size and winding wire used. I don't know if it can make the 1KW as stated and I'm not willing to trash a motor to find out. I plan on getting more of these as they seem perfect for a 4S setup and planes about 4-5 lbs. in weight.


No comments. Reply..

Overall Rating
Arne
5 likes
Value
Quality
Like it?
Nutze den Motor in Multplex Funcub mit 13x4 und Mystery 40A Regler. Macht einen soliden hochwertigen Eindruck.


No comments. Reply..

Overall Rating
gorillas
26 likes
Value
Quality
Like it?
Used with a Master Airscrew propeller 12x8 on a Multiplex FunCub. It draws around 41 amps. The motor has great power!!!


1 comment. Reply..

Overall Rating
halcon
1375 likes
Value
Quality
Like it?
14.03.2011
This is a very good motor for planes up to 5 lbs.
Here some results tested with my watts up:
Zippy 3S 2200 20C, (old lipo - 11,8V), -APC 14x7E, 29,9A, 303W
Zippy 4S 2800 30C (new lipo - 16,6V), -APC 12x8E, 46,3A, 692W
Zippy 4S 2800 30C (new lipo - 16,4V), -APC 11x8,5E, 36,6A, 556W
Zippy 4S 2800 30C (new lipo - 16,2V), -APC 13x6,5E, 49,8A, 727W
I use it in my ASW 28 - 2,7m, 1,8 kg


No comments. Reply..

Overall Rating
Fedor
12 likes
Value
Quality
Like it?
The Quality of the assembly good. And even balanced. 4 stars for minus 30kv only, the general turn 800kv.


No comments. Reply..

.....click here to see all reviews
Aff. Link