USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
When it comes to putting rounds down range, no one wants to compromise on fire power! thats why the legendary Turnigy nano-tech batteries are now available for Airsoft combat. Higher motor RPM, less voltage sag and extended operating times equal better performance from your weapon of choice.
The nano-tech Airsoft series also feature 5C charge ratings putting you back on the front line faster!
Get an unfair advantage and make sure your opponents know that they have been taken out by nano-tech!
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives.
1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Advantages over traditional Lipo batteries: -Power density reaches 7.5 kw/kg. -Less Voltage sag during high rate discharge, giving more power under load. -Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly. -Greater thermal control, pack usually doesnt exceed 60degC -Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load. -Higher capacity during heavy discharge. More than 90% at 100% C rate. -Fast charge capable, up to 15C on some batteries. -Longer Cycle Life, almost double that of standard lipoly technology
PRODUCT ID: NG1800A.2S.25
Capacity(mAh)
1800
Config(s)
2
Discharge(c)
25
Weight(g)
100
Max Charge Rate (C)
5
Length-A(mm)
103
Height-B(mm)
13
Width-C(mm)
35
Update/Add my own data Customer Data
150g
10+
$9.00
acc.
Male Mini Tamiya/AR Drone/Airsoft to Female XT60 (3pcs/bag)
I need to know how to judge if a nano-tech battery is the equivalent to a 9.6v airsoft battery. I don't want to overpower and wreck the gearbox, but still have a great rof. What does the discharge do and what what does the voltage do? =)
This has a nominal voltage of 7.4V (average). Fully charged, each cell is 4.2V, and fully discharged, 3V. This has two cells in series, so you have twice the voltage, for 8.4V fully charged to 6V fully discharged. For motors, a higher voltage means it will spin faster. The discharge on the battery is the maximum current the device can draw. For this battery, it has a capacity of 1.8Ah (1800mAh), and a discharge of 25C (25*capacity). 1.8*25=45A continuous discharge. This is the maximum current the battery can provide, and I believe you'd need a mother of an airsoft gun to pull more then that.
Now how does it compare to a 9.6V NiMH? Well, that's a hard one, really. I'm not sure how much voltage drop one of those batteries will have under load. My SWAG (scientific wild-ass guess) says that it would provide less power then a fully charged 9.6V NiMH battery, but run longer and with less voltage drop, and might work better then a partially discharged NiMH pack.
It's one of those hard things for many of us here to probably answer, a lot of what they guys here used never used 9.6V packs like that, those were used by the $40 "R/C models" you find at RadioShack/Walmart, not the several hundred dollar models many of us use. (We use batteries in the $30-60 price range!)
Warning: LiPos are damaged by over-discharge, on the R/C side we use speed controllers that cut power before the pack is damaged, but an airsoft gun doesn't have that. If you decide to try this, you may want to get a low-voltage monitor from here as well, so it'll beep at you when you need to stop using it before you damage it. Good www.link
Thanks Jonathan! I think I'll just buy 3 different 2S Turnigy Airsoft batteries and I should be able to tell if they are safe by the rof. I have a smart charger so there should be no problem with overcharging.
you better changing to Dean connector or XT60 is more better.
these battery come with tamiya because some airsoft gun use tamiya connector from the origin.
i resel these at my airsoft field these units will hold up fine with most factory airsoft guns unless you are using high power springs and high end aftermarket motors. most stock guns have a 10 amp fuse in them and the guns wont draw more than that. so if you are not good at soldering don't worry about it they work fine i run deans on all of my guns cause i like the connector.
would this be an good combo for my rc car: this battery, S2445-3890 Brushless Inrunner (3890kv), HobbyKing Brushless Car ESC 30A w/ Reverse, and this Hobby King Programming Card for Car ESC
yes they fit but the 1800mah 65c nano tech batterys fit and will give you alot more punch and barely get warm
Customer Reviews
Overall Rating
Karl
1 likes
Value
Quality
Like it?
Where do i start? I have been nothing but impressed with both this particular battery and another configuration i have purchased from hobbyking. With these batteries coming at nearly the same size as a NIMH mini type airsoft battery. I charge at a slow rate and i have never experienced the battery getting even warm. I have used one of these batts in an upgraded King Arms FAL for an entire days airsofting (3000 rounds) at an ambiant temperature of 0 degrees celcius and it had only lost half its charge. Excellent battery and highly recommended.
No comments. Reply..
Overall Rating
Gregor
1 likes
Value
Quality
Like it?
Very happy with this product. For those who are wondering it is somewhat smaller than listed. And it fits TM SIG552 bat compartment if you remove plastic holder for mini bat (4screws on the bottom). A real winner. Shame that 2 days after getting it HK decided to drop the price...not much but still leaves a strange aftertaste :/.
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
