USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.
In short, less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.
Unfortunately with other big brands, numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives.
1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Advantages over traditional Lipo batteries: -Power density reaches 7.5 kw/kg. -Less Voltage sag during high rate discharge, giving more power under load. -Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly. -Greater thermal control, pack usually doesnt exceed 60degC -Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load. -Higher capacity during heavy discharge. More than 90% at 100% C rate. -Fast charge capable, up to 15C on some batteries. -Longer Cycle Life, almost double that of standard lipoly technology.
Great battery life, size and weight similar batteries 5A with more autonomy and discharge capacity and can discharge up to 174A or 348A for 60s (safety margin for peak consumption)
Its removable cables allow for a wide range of use and easy replacement of cables since they can be used 4mm plug's easily found in any store modeling.
For use in series can use a shorter cable for connecting a battery to another adapter and serving as original cable for connecting the electric system, thus facilitating adjustment and reducing weight and cost.
I recommend at least 6A charger for charging at 1C lower than this will become very slow ...
Ó*tima bateria, tamanho e peso similar as baterias de 5A com mais autonomia e capacidade de descarga, podendo descarregar até* 174A ou 348A durante 60s (margem de seguranç*a para picos de consumo)
Seus cabos removí*veis permitem uma ampla gama de utilizaç*ã*o e fá*cil substituiç*ã*o dos cabos uma vez que podem ser usados plug’*s de 4mm, facilmente encontrados em qualquer loja de modelismo.
Para uso em serie pode-se utilizar um cabo menor para ligar uma bateria a outra servindo como adaptador e um cabo original para ligar ao sistema elé*trico, facilitando a adaptaç*ã*o e reduzindo peso e custo.
Recomendo carregador de no minimo 6A para uma carga em 1C menores que isso se tornarao muito lentos...
Just ordered 2. I read the lipo shootout on Big Squid Rc. By far these are the best for your money.
They came in 2nd place and here are the comments:
Turnigy 2S 30C 5800 –* Next on the podium comes the Turnigy. The Turnigy Nano packs have quite a reputation for being solid performers and our test sample performed admirably. The Turnigy didn’*t put out the most voltage on discharge tests, nor was it the fastest on track, but it was by far the least expensive and was right in the hunt in all the test categories. On track the Turnigy provided good rip, launching our test truck out of corners and down the straights with authority. The Turnigy was a solid all around performer at the cheapest price point, arguably making it the best bang for the buck in the field, and it came close to winning the shootout.
No only covers to protect tinned ends from touching & shorting. 12 Gauge wire is used so get like 10gauge so it can slide over easily, not just the wire, but the solder after connection. PUT SHRINK WRAP ON BEFORE SLDERING & do one wire at a time
na maioria dos carros da traxxas eles vem com compartimento para guarda a bateria entao essa lipo hard case nao ira da cerno,pois os fios saem por cima da bateria.
Hi jukka, I'm trying to reply to same post but it just keeps telling me to sign in. Anyway is there any type of adapter I could use to avoid having to cut box? I've read on some other post about a 90* adapter to make it fit easier. Also savage uses deans connector, what would I need to convert it to deans?
Thanks
Yes you can :-)
This battery fits without any problems to the firestorm. You only need appropriate connectors (4mm to deans if you'r esc has a factory/default deans connector)
Does anyone knows if this battery fits in to my car? Which battery charger you propose to this battery? I have actual T-plug on my car, it is possible buy cable with T plug to this battery?
Hi,
To run these on my Stampede, do I need these connectors(the females) as well? http://www.hobbyking.com/hobbyking/store/uh_viewitem .asp?idproduct=9762
And then I need to solder them onto the battery, correct?
Thanks!
hi every one, this battery I ordered 2pcs but the problem is how to balance them it is 2s2p means it has 4 pcs cell (3.7v) inside that connect in parallel n series,, the question what plug or connector that can detect all 4cell so it can balance all? I see the connector for a spec, does it fit with this?
Don't be confused,you can simply charge them like any other LiPo,just use the power cable(2X10AWG-4mm bullet/3X22AWG-3pin balance lead)that came along with your battery pack.
You have to charge the battery as "2 cell lipo" without any worries.
Normally the parallel connected cells will have no "cell-drift" and balance themselves while loading. The cells connected as series are checked by the charger, if it has a balancing-function.
What does mean exactly "2P" in "2S2P" ? Does it mean that for a quantity of 1 we have 2 packs with, for each, the properties shown in description ? Or does it mean that the properties shown in description is for the complete item (so we have, for example, 2 packs with, for each, a capacity of 2900mAH and a length of 69mm) ? Thanks in advance for your answers and excuse me if I do not speak english very well.
2s means 2 cells in serie for example 3.7volt 3.7volts = 7,4 volts
2p means 2 cells parralel for example 2900mah 2900mah = 5800mah.
together it means 7,4volts and 5800mah
It acts and performs almost exactly the same as a 1p, but there is 4 cells of 1450mah inside instead of 2 cells of 2900mah. My 2s2p packs are fantastic. It's just a way of making more power without having to buy super expensive packs.
I am running this battery in a Losi SCT with the castle mamba 4600kv combo. The fit is perfect, and you will be very happy with the performance. The run time on race day for me is anywhere between 15-17 minutes full out. Bashing I can run for 30-40 min!
excellent battery fits any sct.
i run them with a Blitz, mamba pro esc 3900kv 8.5 sensord.
a xxx sct,HK 120a esc HK10.5 sensord 3200kv.
sc10, track star 100a esc mamba 4600kv.
Slash, sc sidewinder esc 3800kv.
Ultima orion 8.5 sistem.
and a losi 1/10 truck.
god run time, god punch and very god perform-enc overall.
they will work great with the stock scte and when or if you upgrade later i just recently steped up to the rx8 esc and the batts still work great and gotta say it is faster
These batteries have the female bullets on top so as to allow the use of straight or 90 deg bullets. you then, as a consumer have the choice. they have much more room allowable than the turnigy hardcase standard lipos for instance.
try measuring the battery box of your flux. You can also check the dimensions of the battery under the ad of this battery.
Customer Reviews
Overall Rating
Fondled
19 likes
Value
Quality
Like it?
hello all, i recieved these batteries yesterday and the punch of these things are amazing, when compared to my 5200mah standard lipoly the difference is out of sight. the hardcase on these batteries offer the protection needed when racing offroad. the batteries are well worth the money guys.
No comments. Reply..
Overall Rating
WilboS
21 likes
Value
Quality
Like it?
Finaly they arrived, two packs of these batteries.
3.82V each cell (we know they are 2P, but is what I can read)
Now I will see how can they fit into a e-Revo battery tray. I will say how.
Very good lipo, plenty of punch, even after 30 charges.
No comments. Reply..
Overall Rating
jvgjvg
70 likes
Value
Quality
Like it?
very good batteries! bought 2 of these drive one today in my rc10 goldpan with turnigy system in it motor 3300 kv it pull wheelies. with my other lipos the turnigy 5.0 and the zippy 4000 this was not happening. great packs for the price temps on the batterie was lower then on my other batteries. when you are racing 1/10 offroad this is the batterie to run. Greatings, Offroadrc
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
.jpg)
.jpg&width=48)
