Please confirm your location:



USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Sale/Liquidation > Liquidation Items
> Electric Motors > All Car Motors
> Cars & Parts > Electric Motors > 1:10th (540 Type)

  RATED:

HobbyKing X-Car 8.5 Turn Sensored Brushless Motor (4000Kv)

HobbyKing X-Car 8.5 Turn Sensored Brushless Motor (4000Kv)
HobbyKing X-Car 8.5 Turn Sensored Brushless Motor (4000Kv)

The HobbyKing X-Car Sensored Brushless Motors offer outstanding performance at an incredible price. Featuring a quality anodized CNC finish these motors look as good as they go! The adjustable timing allows for fine tuning the performance of your ride while the sensor ensures smooth star tups and acceleration. The HobbyKing X-Car Brushless motors make a great upgrade for 1/10th Short Course Trucks, Buggies or Touring cars or anything else that uses 540 size motors.

Specs:
Can Size: 540
Turns: 8.5
RPM/v: 4000kv
Sensored: Yes (Standard 6 pin harness)
Pole: 2
Max voltage: 7.4~11.1v (2S/3S)
Max Current: 32A
Max Watts: 500w
Resistance: 0.0142ohm
No Load Current: 1.3Amp
Shaft Size: 3.175mm
Weight: 163g



PRODUCT ID: S2030-6001


Weight: 235g
Quantity: 
International Warehouse
stock
0
Price  $31.27

acc.
  • Alloy Motor Heastsink for 36 Size Motor

    Combo Price: $2.69   IN STOCK

  • Alloy Motor Heatsink w/Fan Mount for 36 Size Motor

    Combo Price: $3.99   IN STOCK



Further discounts available for registered & logged-in customers.
STOCK ARRIVAL ALERT

Enter your email address to get an email the second new stock arrives.
Estimated factory delivery date;
 Customer rated
519
crowns
  
 
Total of 40 discussions.
Ben  4 points - 12/12/2013
 
If the sensor cable isnt hooked up properly what would happen. cause im having a small problem and i was wondering if this is whys.
 Rustler8 37 points
I used to run mine without the sensor cable, but it really depends on the esc you are using.
Ben  4 points - 12/10/2013
 
I was wondering if someone could help me. i have this motor in my 4x4 short course truck and i was what i good gear ratio is good to use and if anyone knew of any on this site.
 Rustler8 37 points
what kind of truck is it?
Vexatus  5 points - 10/21/2013
 
Will the X-Car 60A ESC work fine for this motor or do I need the 120A version? BTW, I'm not sure if the electrical figures are correct. 32A at 12,6V (max voltage for LiPo without load!) gives arround 400W...
 Terry 3 points
i would suggest a esc no less then 45 amp to run this motor. i'm using this motor an a 60 amp esc in my Axial Wraith. They work great together for me
 Rustler8 37 points
A while a go I had this on my good old rustler. I had it pared with the Hking x-car 100A esc. worked well, had a few issues but had great speed.
Ming  5 points - 7/19/2013
 
Hi, just got this motor & installed on 2wd buggy...... Does this motor run safe on dusty loose dirt track? unlike most others, this motor has a lot open holes that the dirt might get in to the motor & damage it.
 Terry 3 points
i would recommend blowing the motor out with air to keep it clean, plus a drop of oil on the bearings .. It should last you along time . If this little manitance is keeped up after each run at the end of the day.
Andrzej  12 points - 7/1/2013
 
Hi! I know that sensored motors has smoother start, but does anyone know if they has lower minimal rotation speed that sensorless, like brushed motors? On very low voltage sensorless motors suffer "cogging", am I right that sensored ones doesn't have these issues?
 Terry 3 points
Your correct , censored motor dont cog that much. Unless the voltage is to low..
Customer Reviews
Overall Rating
__Harw
31 likes
ValueUNRATED
QualityUNRATED
Like it?
I bought this motor right away. Tested it quickly today. Seems to be good product. Tested it in X-fatory X6 sq 2wd buggy with Speed Passion Cirtix short course master -sensored esc with 2s Lipo. In cold weather it didn't even got warm. It came with a good quality sensor cable! Will be testing more this weekend indoor racing... back for results.


8 comments. Reply..

Create an account
Overall Rating
davidpc2
206 likes
ValueUNRATED
QualityUNRATED
Like it?
Waiting for this beauty, because on the photo it seems so, well buit and with good space for soldering wires. Hope it works as it seems


7 comments. Reply..

Overall Rating
William
7 likes
Value
Quality
Like it?
Cant get any better!I ran it the other day and the power is perfect!And of course the price.Will buy more!!!


No comments. Reply..

Overall Rating
alfonsoirwin
23 likes
Value
Quality
Like it?
I have this motor in a hpi cyber 10b with a Turnigy 60a esc and works very well, temperature is reasonable for a 4wd modified buggy. Compared to a novak 8.5, this one feels with more torque.


1 comment. Reply..

Overall Rating
Anthony
9 likes
Value
Quality
Like it?
Ordered this motor the other week, when it arrived it looked awesome. Put it in a Tamiya tt01e Porsche with a Hobby King 60a sensored ESC. Heaps of torque and a top end speed of 40kmh (gps) with standard gearing and NIMH batts! Awesome motor for the price can not fault it so far. Cant wait to re-gear the car and see what it can really do.


No comments. Reply..

.....click here to see all reviews
Aff. Link