USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
HK-500CMT 3D Electric Helicopter Kit incl. GF blades and extras (DE Warehouse)
The highest SPEC HK Heli, the CMT is all metal, all carbon and allll good! You cant upgrade this bad boy, its already upgraded to the maximum! Much bigger than its smaller 450 brother, the 500CMT is an exciting helicopter to see in action and even more exciting to fly. Its 2024 alloy head ensures hard core 3D pilots wont be dissapointed in the performance and the beautifully painted cowl and Titanium anodized components make this a visually stunning helicopter with performance to back it up! Carbon Fiber main frame, CF horizontal & vertical fins also full metal tail unit makes this heli perfect for Pros! All parts are 100% compatible with T-Rex 500 Included are main and tail blades & Carbon Fiber boom supports. Click here for parts and upgrades.
We guarantee you wont find a better priced heli of this quality anywhere!
Features. Light weight design provides awesome flight performance and extreme 3D capability. Rotor head/tail with thrust bearings. Direct-to-swash CCPM linkage. Center of gravity of battery tray designed close to the rotor head. High efficiency belt driven metal tail. Fully driven tail auto rotation system. Tail servo boom mount. Carbon Fibre Main Frame and boom support rods.
Specification. Length: 840mm Height: 310mm Main rotor diameter: 970mm Tail rotor diameter: 200mm Motor pinion gear: 13T Main drive gear: 162T Tail drive gear: 31T Drive gear ratio: 1:12.46:4.68 Weight(without power system): 1370g Flying weight: Approx 1700g
Required items. Brushless Outrunner Motor Servos : See linked items below. Radio Gear : Gyro/Rx ESC : 80A or greater. Battery: 2 x 2200mAh 3S 20C or greater.
Click here to view more products in the DE warehouse.
Item also available from our (International) warehouse view now.
We cannot ship to German Packstation addresses.
Wichtige Hinweise zum Umweltschutz
All products sold within Germany are CE Certified and comply fully with European/German environmental regulations!
Hallo Ich wü*rde mir gerne den HK500 zu legen und eig auch den HK550 und den HK600 die frage ist jetzt nur was besser ust Riemenantrieb oder Starrantrieb?
Kö*nnte mir da jemand einen Tip geben?
Danke schonmal im vorraus.
Hi,
I see flybarless helis only with torque tube , not a single one is belt driven. Is there a reason only helis wit a flybar have belt driven tail rotors?
Is there a recomended set for accessories? Motor, Servos, Lipo, Esc, .....? It does say: see linked items below ... next to servos, but I don`t see any.
Johannes, google for hk heli forum. You will find all your questions answered there, many tested setups and tips, nice and helpful people. I'll try to post the link, might work: hk-helisDOTforum-aktivDOTcom/forum
Hi,
I´*m totally new to helis, also I fly my tri copter, here`s my question.
The HK500 CMT is stabilized by a flybar. Can a Vstab be added to such a system later, or would I need a totaly different system? Vstab does have some advantages, for example auto level.
Flybar is super stable for beginner... i know..
Elektronik a little bit expensive. If you had money
buy beastx or so .. and test it first only as
the heck gyro stabi mode...later you will buy autmatic flight control for the best hk 500ttFBL..
Version B- best ... besser geht nicht mehr...leider
Recebi o meu HK500 CMT comecei a montagem do mesmo e dei logo com um erro a correia do rotor de cauda é* mais curta nã*o se consegue instalar terei que aquirir uma original pelos vistos quanto ao resto está* aceitá*vel pelo preç*o
Hi Tiago, I would like you are here in my city! I overflow your videos and they are really really very good. Best in that NET! So I will check my heli that evening and try all first without Flymentor. I must adjust everything. But now I have a Fly Sky 9Thx with a $pektrum DSM2 DM9 Modul. And I must find my adjustings i that TX. My problem is that I have no tools forr adjusting for blades and the other part. But I must see how far I can go with that. Thank You first of all. Greetings Michael
Hi Michael, I'm glad you liked this videos, but they are not mine... I was just trying to help you and other beginners like you and me to setup their first 500 helicopter.
I've seen a few videos about your receiver and it looks very good. A little hard to sincronize with the receiver but easy to configurate according with the user.
With ajusting the blades I think I can help you out, watch this video:
I'm thinking in installing one of these flymentor in my heli when it arrives, are you happy with it.
Open the image "Revo curve"... In my previous post. If you still can figure it out try to leave your question in your Tx page so other user with the same remote control can help you.
Was machen die Schrauben in den Lö*chern der Flybar/ oder da wo die Paddle reinkommen. Normalerweise muss dort doch die Welle durchgehen? Bei mir sind Schrauben drin? Wieso habe ich Schrauben da, wo die Stange durch muss?
Die Schrauben dienen nur dem Transport (Die Einheit wü*rde ja sonst auseinanderfallen) - also Madenschrauben lockern, Schrauben raus und Flybar durchstecken.
Can I use this ESC for that Heli???? Is it enough? Hobbyking SS Series 90-100A ESC (yellow Series). Must I use so big ESC for That Motor: Turnigy 500 H3126 Brushless outrunner 1600KV? Or is it better to use: Turnigy dlux 100A SBEC Brushless Speed Controller for that Motor?
HK SS Series is reliable, and power is enough for 500 class(fly it best with 6S), but: no slow spin up function, no BEC (you need extra UBEC). ESC with BEC is better, you need BEC of best 5,5-6V and min 4A. Turnigy H3126 is very good any economic motor, even the 1300KV is enough (with 17T pinion good for 2400 head rpm) Spend better a bit more for ESC like for Turnigy Super Brain 80A Brushless ESC, it is a very good one with all you need even data logger(this feature is not just a toy!! Especial
I am beginner: Please let me know all settings in the Turnigy9TX. What Program, where must I connect the 4 Servos and gyro and ESC. On what Channel? Who can answer? I have Gyro Hobby King 401B AVCS Digital Head Lock Gyro, 3x Turnigy MG930 Digital Metal Gear Servo 3.6kg, 1 Servo HK15158A Digital BB/Coreless Mini Servo 25g / 2.8kg / 0.07s, Turnigy 5A (8-40v) SBEC for Lipo, 1x #HK15158A/18216 HK15158A Digital BB/Coreless Mini Servo 25g / 2.8kg, 1x #TR31264-1600/14729 Turnigy 500 H3126 Brushless outrunner 1600KV, esc 70A current
You need 3 servos for the swash plate and one more for the tail. I suggest 3x MG930 for swash plate and a bigger one for tail Mi Digital High Voltage Metal Gear Servo 8.40kg / 0.03 / 61g. (you need mounting bracket from HK600 for it, but its the work worth. Gyro Hobbyking 401b is inexpensive and works fine, ESC best turnigy super brain
Can anyone list all parts needed to get this running. Planning to give it as present to someone and want the full kit so it dont miss any parts like remote control.
You need to buy:
1x Turnigy Brushless ESC 85A w/ 5A SBEC
1x Turnigy Typhoon 500H Heli Motor 1800kv
3x Turnigy MG930 Digital Metal Gear Servo 3.6kg
1x Power HD 3688HB Digital Servo 25g/2.8kg/.07sec
1x HobbyKing GA-250 MINI-MEMS Gyro
1x or more Turnigy 3000mAh 6S 35C Lipo Pack
1x HXT 4mm Gold Connector w/ Protector
and your remote control...
Motor: 1600kv brushless outrunner* Battery: 3000mAh 6s 25C-30C or greater* Charger: for the battery* Cyclic servos(M. rotor): 3x 3,6kg/0,14sec* Tail servo: 2,22kg/0,09 sec (buy a quality servo)* Gyro: A good one depending on budget* ESC: >= 85A* Program Card For ESC: Battery connector* 2,4Ghz Transmiter(mode 2 in my opinion) and receiver*
Hallo, Am Mischhebel zur Taumelscheibe ist ein zu langer!!!! Kugelkopf montier.Mit diesem schleift das lange Pitchgestaenge am der Padellbrücke und blockiert oder verbiegt den Mischhebel.Unbedingt den Kugelkopf gegen eine einfache Kugel austauschen.Alle Lager waren ungefettet.
Die Drucklager waren nicht ganz passend und
die Rotorwelle etwas aus der toleranz..hab
mir dann eine Titanwelle gegö*nnt.. Fett egal..
lä*uft und lä*uft flieg..
Also der CMT ist ne Ecke besser als der GT, alein wegen dem CFK Chassi, und den Mischhebeln aus Alu.
Nicht zu vergessen das spielfreie Heck aus Alu!
Ich fliege den CMT und bin wirklich begeistert, besser als der GT, den ich ein paar wochen davor gekauft habe. Mir dient der GT als Ersatzteilspender!
also nach bestimmt über 200 fluegen moechte ich mal sagen absolut 1a der heli,ich habe auch das orginal, also bis 2400 umdrehungen (anfänger z.B ich ) sehr zu empfehlen , was mir aufgefallen ist es gibt sogar ein teil am heli was besser ausgefuert ist als am orginal und zwar die heckrotorsteuerbruecke ist beim HK kugelgelagert und absolut spielfrei,
Dear hiluxsurf4x4: They are waiting for one large shipment from other warehouse to Europe warehouse.
Then they can ship it to you.
Customer Reviews
Overall Rating
CRISTIANO
8 likes
Value
Quality
1 thumbs up!
ne ho acquistati 2 pezzi e mi sono accorto che essendo un clone manca un piccolo pezzo nella testa del rotore che stabilizza l'allineamento delle pale l'articolo corrispondente originale è Feathering Shaft Sleeve Set H50083 ,una piccola spinetta in plastica che serve a spessorare l'alberino che tiene le due manine porta pale del rotore principale , infatti avevo continuamente problemi di allineamento delle pale ,per il resto tutto bene ,si sono persi in un bichier d'acqua ,tra le altre cose a catalogo HobbyKing questa spinetta non esiste come pezzo di ricambio.!!!!!
Tolle Qualität sehr viele Aluteile. Bei meinem Bausatz scheinen alle Teile in Ordnung zu sein. Das Heckrohr habe ich um 3mm gekürzt (sonst ist der Riemen zu stark gespannt). Die Schrauben sollten alle kontrolliert werden und teilweise mit Schraubensicherung versehen werden. Haube OK (keine Risse) der Heli kam schnell und gut verpackt.
No comments. Reply..
Overall Rating
bigwill34
4 likes
Value
Quality
Like it?
alors là,si il avait dix étoiles,je les mettrai!!
que ceux qui cassent du HK dans les forums achètent cet helico et ils changeront d'avis!tout est bien usiné,beau,précis, et ça vole à merveille!
regardez mes vidéos sur youtube de mon HK500 dans un fuselage de bell429,ma chaine est willswings.
seul problème rencontré ,mon gyro (un HK401B )faisait n'importe quoi,j'ai relié un cable torsadé (genre cable de frein de vélo)à une vis du support moteur ,et ,en le faisant courir le long de la queue,fait en sorte qu'il frotte contre l'axe de rotor d'anticouple sans le freiner,juste en le calant dessus l'axe et faire en sorte qu'il dépasse du boitier d'anticouple d'un cm en le faisant passer sous le pontet qui relie les flancs du boitier d'AC le plus eloigné de la queue.(celui à gauche quand on voit son helico par le flanc droit ,la canopy étant à droite.
du coup plus d'electricité statique ,tout est relié , mon gyro est plus que précis et la queue de mon appareil est super stable.
merci HK !!! et à quand une FRENCHWAREHOUSE??????on en veut une!!!!
2 comments. Reply..
Overall Rating
Andreas
4 likes
Value
Quality
Like it?
Super Schneller Versandt. Die Qualität ist gut, biss auf die Kabinenhaube, die ist etwas Wabelig. Kann den Heli empfehlen.
No comments. Reply..
Overall Rating
flyzyx
7 likes
Value
Quality
Like it?
got it fast only 3days everything looked ok- but cannot say it is good and cheap have spent twice as much on this compared to a orginal- it is filled up with errors and errors- EWERRYTHING is swarp with align parts except the carbons sides and tailrotorholders and canopy. dont buy this crap, I bought this to see how theap i was appel to build it-so it only cost twice as the orginal.....hmmmmm-crap. If you need a challange -buy it :)
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
.jpg&width=48)
.jpg&width=48)
.jpg&width=48)
.jpg&width=48)
.jpg){kind=small}
