USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery. For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots!
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!
Suited to the following models: MIKADO LOGO600/600SE, MA Furion 6
* The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. 1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly. Advantages over traditional Lipo batteries; -Power density reaches 7.5 kw/kg. -Less Voltage sag during high rate discharge, giving more power under load. -Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly. -Greater thermal control, pack usually doesnt exceed 60degC -Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load. -Higher capacity during heavy discharge. More than 90% at 100% C rate. -Fast charge capable, up to 15C on some batteries. -Longer Cycle Life, almost double that of standard lipoly technology.
The thing is, i don't want to put 2 packs together, i'd buy a 12S Stick if available. Then i don't have the problems with to short wires and another heatshrink around. Thats my point!
I am disappointed in these Lipo's. The are rated at 10C charge rate, I always charged at 1 - 1.5C, and never discharged below 80-80%, still, after about 30 charge discharge cycles (10 minutes flights with a Logo 600SE, nothing special, just gently flying around) 2 of the packs are puffed. They never become flat again and after each flight they are round as a balloon. Also they don't deliver in flight, a stall turn just drops RPM considerably. The packs don't deliver enough amps. Just stock Logo SE, Kontronic ESC and all stock. It is a big dissapointment for me and I won't buy them again. HobbyKing is not to blame off course, but hey, I've tried and came to the conclusion that it is *NOT* "More than just a fancy name." as they advertise. It sounds nice "Nano Tech" but it simply does not keep up expectations.
sono molto deluso delle nano-tech dopo aver acquistato 1 10s da 5000mah e 2 10s da 4000mah,
la 5000 mah dopo 3 voli si e' gonfiata
incredibilmente tanto da doverla abbandonare.
le due 4000 mah dopo circa 20 voli no rendevano piu' come prima ed ho continuato a volare fino a fare 52 voli per pacco alla fine alcune celle in volo mi hanno abbandonato abbassando il voltaggio a 0.00 per cella. Non acquisterò* piu nano-tech.
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
.jpg&width=48)
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
