Please confirm your location:

USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Radios & Receivers > Complete systems
> Radios & Receivers > Futaba
> Radios & Receivers > FrSky > Modules


FrSky DF 2.4Ghz Combo Pack for Futaba w/ Module & RX

FrSky DF 2.4Ghz Combo Pack for Futaba w/ Module & RX
FrSky DF 2.4Ghz Combo Pack for Futaba w/ Module & RX

FrSKY ACCST technology is proven, approved by many model associations, tested and reviewed as the leading Chinese 2.4Ghz R/C Technology. If you think DSM2 or FASST is the best, think again!

New FrSKY ACCST (Advanced Continuous Channel Shifting Technology) gives you secure radio communicatios in 2.4Ghz band. ACCST 2.4GHz system shifts 80 channels around hundred times per second in the 2.4GHz band. This means that the system is completely resistant to interference in that band.

The Two-way Radio System developed by FrSky provides an additional return link that would be used for monitoring the Rx’s voltage, temperature, location, speed and so on.

Advanced Continuous Channel Shifting Technology (ACCST is our advanced tecnology it shifts channel hundred times per second and there is no signal conflicts and interruptions) robust frequency agility.
Easy to bind and very fast link-up.
Excellent reboot time.
True Diversity with two antennas.
All channels can be programmed with Failsafe, quickly and easily.
Quick and extremely stable in performance.
Precise and smooth servo response.
Extended range (1.5km-2.5km).

Futaba: 3PM, 3PK, 7U, 8U, 9C, 10C, 9Z, FN-Series, T10C, FC-18, FC-28.
Hitec: Optic 6, Eclipse 7, Prism 7 
Receiver Specification:
Operating voltage: 3.5~10.0V
Power consumption: 100mA
Resolution: 3072
Latency: 22ms
Analog voltage: 0~3.3V
Number of channels: 8
Range: 1.5km-2.5km
Dimensions: 55 x 25 x 14 mm
Weight: 12.4g
Version: 2.0
Module specification:
Operating voltage: 6.0V-13.0V (can handle 3S!)
Power consumption: 50mA
Output Power:: 60mW
Resolution: 3072 (11bit)
Dimensions: 58.5x37.5x22mm
Version: 2.0


1 x 8-channel transmitter module DFT
1 x Transmitter Antenna
1 x 8-channel receiver D8R-II PLUS


Weight: 175g
International Warehouse
Price  $47.99

  • 2.4Ghz 7DB Antenna for FrSky Modules (And compatible Radios/Modules)

    Combo Price: $5.51   IN STOCK

  • FrSky USB Cable

    Combo Price: $8.31   BACKORDER

Further discounts available for registered & logged-in customers.
 Customer rated
Total of 233 discussions.
Mehmet  1 points - 5/18/2015
Dear Sirs, To be quı*te sure,I want to learn if this product can be used with my transmitter Hitec Prism 7. Your soonest comfirmation will highly be appreciated. Rgds Mehmet Yuksel
Phillip  2 points - 5/10/2015
A follow-up question. I have in my hand an old Futaba Gold box TX FP-T7FG/K which does have a module in the back contrary to the comment below. Will the unit work in this Tx??
ccameselle  7 points - 4/28/2015
Hello everyone! I own one of this modules and I was wondering if it is compatible with the fly sky model fs-r6b. Some people tell me that yes they are but I can't get them to bind for the life of me Thank you in advance for all your help
 ElectricAussie 4296 points
Hi ccameselle, I'm almost certain it won't bind to your FlySky module because of the FrSky ACCST format of the transmission signal. Your FlySky Rx is probably designed to read a different format signal. The formatting is like an electronic handshake that allows a Rx to recognize/bind only the Tx brand it was designed to work with. This is one of the reasons that 2.4GHx systems are interference-proof from other Txs at the flying field. The Rx can only "see" the Tx it was paired/bound with. Cheers, EA!
Michael  2 points - 4/20/2015
 ElectricAussie 4296 points
Hi Michael, The FUTABA 7FGK isn't fitted with a transmitter module on the back side, so this kit won't work with it. You can use the FrSky hack kit (PRODUCT ID: FRTEL) if you have some basic wiring/soldering skills. I've used both systems to convert my old transmitters over to 2.4GHz and they have been bullet-proof. The hack kit in my old HiTec Flash5 has been going strong for 5 years of constant use without a glitch. Cheers, EA!
 Phillip 2 points
A follow-up question. I have in my hand an old Futaba Gold box TX FP-T7FG/K which does have a module in the back contrary to the comment above. Will the unit work in this Tx??
Buzz-liteyear  17 points - 4/19/2015
this module says Version 2 and the other one doesnt, what the diff ?
Customer Reviews
Review Blogs for this item
FrSky Telemetry Module in the Hitec Aurora 9
please help
Overall Rating
4 thumbs up!
I purchase this Unit to put then in my Hitec Aurora 9 (doing some modification obviously) and it is working perfect, to get this install I did not even need to open the Aurora it was so simple that I could not believed. I been using the JR FrSky (normal w/o telemetry) on my Turnigy 9X also and is been reliable also. Very happy with this module. Highly recommended.

6 comments. Reply..

Create an account
Overall Rating
1 thumbs up!
excellent achat de tres bonne manufacture.. vraiment facile d'utilisation bien que sans notice papier! premier achat en 2,4Ghz et vraiment satisfait

2 comments. Reply..

Overall Rating
1 thumbs up!
Everything seems to work perfectly in my Hitec Optic. Remounting the antenna making it point upwards was a simple task.

Rumours said that the beta version of FrSky couldn't handle cold weather (had problems at -1C/30,2F, but this one works fine in -19C/-2.2F

Works with both telemetry and non-telemetry receivers, but you will have to change some tiny fragile switches on the module each time. It's better to go all telemetry or non-telemetry.

5 comments. Reply..

Overall Rating
1 thumbs up!
hi what an i doing wrong ,cant get it to bind,read the instruction 10 times still wont bind,after switching receiver back on it only has red light on not green,do you plug battery into ch 8,no battery id on case ,this is v2

1 comment. Reply..

Overall Rating
1 thumbs up!
Frsky telemetry 8ch distance on ground test, on futaba 9c
The tx was cca 40m above rx points.
At 5.37 km distance the bind was working 100pcnt

4 comments. Reply.. here to see all reviews
Aff. Link