USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
HK-500GT 3D Electric Helicopter Kit (incl. blades and extras) DE Warehouse
The high performance HK-500GT is 3D flight ready. 99% of parts are compatible with the Align T-rex 500
Much bigger than its smaller 450 brother, the 500GT is an exciting helicopter to see in action and even more exciting to fly. Its 2024 alloy head ensures hard core 3D pilots wont be dissapointed in the performance and the beautifully painted cowl and Titanium anodized components make this a visually stunning helicopter with performance to back it up! You wont find unecissary or poorly fitting bling alloy components on this heli. Alot of thought has been put into the production of this machine as seen by the FRN* tail which uses alloy only where its needed; in the arms and partially hidden belt pulley making it lighter with no sacrifice in strength; proving the helis no-bling all-performance attitude.
All parts are 100% compatible with T-Rex 500 Included are main and tail blades & Carbon Fiber boom supports.
We guarantee you wont find a better priced heli of this quality anywhere!
Features. Light weight design provides awesome flight performance and extreme 3D capability. Rotor head/tail with thrust bearings. Direct-to-swash CCPM linkage. Center of gravity of battery tray designed close to the rotor head. High efficiency belt driven tail.
Fully driven tail auto rotation system. Tail servo boom mount. Carbon Fibre boom support rods. High rigidity 2024 alloy main frame.
Specification:
Length: 840mm
Height: 310mm
Main rotor diameter: 970mm
Tail rotor diameter: 200mm
Motor pinion gear: 13T
Main drive gear: 162T
Tail drive gear: 31T
Drive gear ratio: 1:12.46:4.68
Weight(without power system): 1370g
Flying weight: Approx 1700g
Required items. Brushless Outrunner Motor Servos : See linked items below. Radio Gear : Gyro/Rx ESC : 80A or greater. Battery: 2 x 2200mAh 3S 20C or greater.
*FRN Fibre Reinforced Nylon 25% lighter than billet alloy and composed of 30% Carbon and Aramid fibers mixed with Nylon. This provides strength (modulus of elasticity) where standard plastics and 2017 alloys would bend.
Click here to view more products in the DE warehouse.
Item also available from our (International) warehouse view now.
We cannot ship to German Packstation addresses.
Wichtige Hinweise zum Umweltschutz
All products sold within Germany are CE Certified and comply fully with European/German environmental regulations!
can i run one 6s 30c 5000mah zippy battery or will it not fit. i herd some people say it can fit and some other say it will not fit. some one plz reply.
many thanks
Steuerung fü*r Heli? Rechte Hand oben /unten = Vorwä*rts Rü*ckwä*rts? Rechte Hand links rechts = um die eigene Achse links rechts oder schrä*g nach und schrä*g nach rechts? Bin Anfä*nger und mö*chte den Simulator einstellen. Linke Hand oben und unten Gas,OK. Linke Hand links rechts=??? Was ist mit dem Gyro im billigen FMS Simulator?
There is the blade holder and extra screws mostly. rotor head assembly is assemble and housing tail roter not like Ali?? Heles have to put everything together.just dont forget to loc tite everything and you ll be fine
Hi,
As above however in case you dont know, the thing with loctite is you only need to loc tite metal-to-metal stuff. For example plastically moulded items in the rotor head assembly you do not need to.
ONLY METAL-TO-METAL
Naja der GT hat ein plastik Heck, meins hat leichtes Spiel gehabt. Beim CMT und dessen Aluheck war dies nicht festzustellen! Preislich bist du beim CMT besser bedient allein wegen dem Carbon Chassi, das man bei der Akkurutsche leicht tieferlegen kann als beim Metall vom GT.
Alu-Chassis sind optimale Motorkuehlkoerper und funktechnisch viel besser als Carbon. Bei meinem HK-500 GT habe ich nach 15 Minuten Flugzeit einen nur handwarmen Motor mit meinem 4S 5000 mAh Setup. Mt einem Torque Tube Umbaukit GT500PRO-T wird man auch das Plastik-Heckgehaeuse los und bekommt zudem einen leichter laufenden Heckantrieb. Der naechste 500er wird wieder ein GT Starrantrieb :-)
The CMT version is all carbon fiber, aluminum and metal unlike the HK500GT which has a metal and plastic rotor head assembly. Also the main frames are metal. These are the differences
No you have to buy it seperately and would recommend that you buy a couple of different teeth and select the best teeth as per your requirement. Thanks
yeah. I buyed the electronics at the same time in Hong Kong, They were delivered today. But I still whait and whait for that helicopter...! thats not good...
PS: Nice Profilephoto Joakim :D
Yeah, I really want my chopper right now aswell. Tired of waiting, but I'm gonna be giddy like a little kid on xmas when it comes =)
That photo is something special indeed, too bad I don't know the girl
It is my very first order from hobbyking =)
But I can wait, since I haven't flown an rc heli before I will practice on the sim for a couple of months first anyhow. But you should probably ordered from the international store instead of the german one.
Yes, this is one kind of setup:
MG930 servos
Plush 80A ESC
500H heli motor
metal tail upgrade
Zippy 3000mAh/20C
*Futaba s9650 tail servo
*Futaba GY410 gyro
got lots of others but this would run good I think =)
I am also waiting for the HK600 to come up in EU-warehouse.
Customer Reviews
Overall Rating
Wilhermine
27 likes
Value
UNRATED
Quality
UNRATED
Like it?
schnes Ding, leider ist meine Canopy mit einem Riss angekommen. Bei dem Preis ist allerdings locker eine neue mit drin. Ansonsten solider Heli, 100pcnt T-Rex500 kompatibel. Ohne Anleitung, lediglich eine Explosionszeichung ist dabei. Reicht aber vllig aus! Jedoch sollte der vormontierte Heli kompl. Zerlegt werden um auch wiklich jede einzelne Schraube mit einer Schraubensicherung zu verkleben (blau).
5 comments. Reply..
Overall Rating
Customer
10 likes
Value
UNRATED
Quality
UNRATED
Like it?
Magnifico heli, gran acabado, muy facil de ajustar y una vez ajustado se pueden sacar las manos de la emisora
excellent condition on the hely, but the canopy il slightly broken...
No comments. Reply..
Overall Rating
DerClown
28 likes
Value
UNRATED
Quality
UNRATED
Like it?
Well I bought this one as a donor to repair my crashed HK-500CMT. All in all looks great for the price you pay, and you get GF blades. After serious crash its better to buy whole hely than parts, since they usually not in stock. I received the item from Germany to Lithuania after 4 days.
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
.jpg&width=48)
.jpg&width=48)
.jpg&width=48)
.jpg&width=48)
.jpg&width=48)
.jpg&width=48)
.jpg&width=48)
.jpg){kind=small}
.jpg){kind=small}
