FPV Fiberglass Pan-Tilt Camera Mount

 Petr Hejl 1 points

****

 firatp 150 points

You don't need to have a separate Tx/Rx. Just put 2 servos for pan and tilt, then connect those servos to spare channel on your Receiver at the plane.Assign 2 knob controller on the TX to operate the pan and tilt.

 Petr Hejl 1 points

You can also control your pan/tilt with a head tracker on your goggles, this usually hooks up to the trainer port in your transmitter and two channels are assigned to this port. The servos then connect to the appropriate slots on your receiver.

 Laxmikant 533 points

Like Fatshark cameras

 Mar11 1961 points

no they dont.. too small ! did you try or just sayin ?

 Laxmikant 533 points

i tried

 Mar11 1961 points

can u specify which camera.. post link !

 Laxmikant 533 points

PRODUCT ID: Cam003

 v_max 379 points

I'd suggest to use "Micro 3D Single Axis Thrust Vectoring Motor Mount" Item ID: 9095000018

 Laxmikant 533 points

this is for small cameras like fat shark camera's on Hk. on pan tilt camera is held by screws and for mounting the whole thing u have u ave to fit the pan tilt frame on the plane with some arrangements according to ur plane

 Mar11 1961 points

Yeah I know I have everything... this is my question I have the arrangement but can't see how it will fit on the plane ...unless I attach the servo

 alex.khoroshko 325 points

That's how it works. Just fit the bottom servo into the plane.

 alex.khoroshko 325 points

forgot to mention. The camera on the video is L-size, whereas this camera is small, like for the fat shark camera. They have equal design, only the size is different

 Laxmikant 533 points

U can put it any free channel but put on the channel which has regulator on it so that you can hold ur camera at any direction.

 Mar11 1961 points

i cant believe i used to ask such questions..

 Laxmikant 533 points

i guess ur using the sony cameras this one is for small cameras like fatshark cam

 Thorax78 231 points

Yes, I'm using this with camera in the link and it's a perfect fit. You can see an example under "file" tab.

 krekrek 19 points

O suporte me ofereceu $1 de desconto na pró*xima compra. Isso nã*o está* correto. Sem a peç*a o produto nao funciona. Poderiam me enviar a peç*a que faltou. Ou outro produto. Gostaria de comprar a peç*a faltosa, incluindo o envio, pelo valor que me ofereceram. The support offered me $ 1 discount on the next purchase. This is not correct. Without the part the product does not work. Can you send me the piece that was missing. Or other product. I would buy the faulty part, including shipping, for the amount they offered me.

 RonRC 1993 points

fiberglass or carbon fiber are not healthy to inhale or get into your eyes. If you're going to be cutting this stuff, spit on it or use something that will keep the dust down wear a respiratory mask and safety goggles. DON'T USE a Dremel tool on this stuff either.

 genrlst 19 points

they should have coated the edges of the fiberglass board to avoid the dust from coming off

 RonRC 1993 points

genrlst, it is a good idea to rinse these types of materials before working with them. Anything to keep the dust down. This is why I don't install insulation! Ha ha! Nasty stuff and no matter how much I try to protect myself when I do work with it, I still get some stuck in me somewhere and need an electron microscope to get it out. Take care and happy flying!

 RC Fun 371 points

I have used these for small camera but they would be to small for the GOPRO

 NumnutChriS 472 points

Gopro is too heavy for this, with or without the protective case its just too big.

 Kirill 72 points

No. This tilt mount is not suitable for gopro. However this one: www.link will suit gopro

 RonRC 1993 points

I bought two of these not to use as advertised but to make a hanging gimbal with two servos and a Hobby king quad control board.

 RonRC 1993 points

So, is this for if you want to purchase this item? Not that familiar with how the buddy system works. Thanks and Happy flying!

 PerlCoder 47 points

That nice but I get "Access Denied" with that link.

 mslootweg 10 points

Login on the forums first and then click the link. You won't get "Access Denied" that way.

 MikeyFlys 66 points

Removing answered question.

 Soren 34 points

Nice manual, Troels. Best to use HXT500 servos, but Works with HXT900 as well.(j-u-s-t enough room). - Soren

 WesleyChuen 1 points

It's not easy to get that link working. The search couldn't find it night. Finally, I had to login, open up and read any of the post. And then replace the TID to 14088 and I could finally see the manual post.

 mslootweg 10 points

Ah yeh, the link broke. The new working one is: www.link have to be logged in for it to work, so login first, then click the link.

 wolfes1126 3344 points

Hi Perlcoder,
i have mounted mine with the bevelled edge (bigger Diameter Lip) to the Inside.
that way it has more support against the swiveling Plate that you mount your Camera and Servo on, and leaves less play for possible Vibrations.

If this helped you please click the Button below.
Thank you

 Blind Vision 437 points

I made a Manual, already here www.link search the forum "FPV Fiberglass Pan-Tilt Camera Mount (MANUAL)" Ikea style, lots of pictures, really helpfull -Troels

 MikeyFlys 66 points

Removing answered question.

 PsyCopter 9 points

LOOONGERRR SCREWS!!! GOD DAMN! I am about to EXPLODE!!!! MAKE THE BLACK SCREWS LONGER!!! GOD DAMN!!!!

 pd5dj 37 points

The servo is mounted with some foam tape, and there are precut fiber pressnuts wich click in place.

 MyDSi 114 points

all you need to build this one and to mount servos is some glue :)

 jollybandit 54 points

if you wrap your servo body first in some electrical or f/g tape first prior to glue (i just use just standard silicon) then if ever necessary to recover/ replace the servo you just cut the tape and peal it off without any residue, then you can work away at removing the tape and silicon, and because the tape is flexible it comes away much more easily, rather than trying to separate the flat servo area with a screwdriver. all my plane servos are glued in this way for easy replacement even on foam

 joseimpo 159 points

The tilt servo is glue

 randall 12 points

I used epoxy to glue mine but you can use double sided tape, silicone or just about anything.

 victor 16 points

Do not use glue, use double-sided adhesive tape

 tarro 24 points

use CA it's strong and easy to remove

 Roel-CP 15 points

This unit is used for FPV flying
It is very small and the most mini securitycamera's doesnt fit.
Kind regards Roel Fly Wild The Netherlands

 Oleg 5 points

It fits any board camera that is not bigger then 4cm*4cm

 JULIO 5 points

sencillo y facil de montar, funciona muy bien

 GTiDon 7 points

Are the screws included? Mine arrived with no screws.. I cannot get these parts locally.. Thats why I ordered it online.. and now I still dont have the parts

 H-KING_SCOTT 5156 points

We have a pan/tilt system arriving soon.

 psychosaffa 37 points

cheers Jason, will it be before, or after you get stock of eagle eyes ground station? lol

 Zebra 12 points

Hi! Just on the off chance: you do know that there is a larger version available? www.link

 psychosaffa 37 points

big enough to mount a patch antenna, to use as a tracker, on the HK website? got a link?

 Zebra 12 points

I tried to add the link but this board chops them. Just put 'pan-tilt' in the search bar. You should get both camera mounts - mind you, neither are available right now. Whether it is big enough you have to work out for yourself :) Regards,

 psychosaffa 37 points

are you having a giraffe? do you know what an antenna tracker is? these will never work for that purpose!!

 -Ace- 19 points

well then dont put tha kind of comment in "FPV Fiberglass Pan-Tilt Camera Mount" and if u are smart enough you can make it by ur self using popsicle sticks and servos... just use ur brain and invent.

 Roel-CP 15 points

Come on dude
You know that kind of stuff isn't suitible for an antenna tracker.
It need to be ver accurate.
go to servocity for good tracker parts.
Kind regards Roel Fly Wild The Netherlands

 psychosaffa 37 points

please note that this is the discussion section regarding the item, IE the place to discuss things regarding the item, thats why i asked a question, i didn't make a statement, i asked for it to be ENLARGED, please read posts properly before wasting other peoples time, i know this item cant be used for AT, but if it was ENLARGED it could. thank you

 mkucuksari 3 points

I can not register into the forum, always have a problem with it. So could someone can upload MANUAL from www.link "

 Zebra 12 points

Hi! Google does it! Here is a link to the same page translated with Google tinyurl****/5wqexm5 (if the link get chopped: tinyurl[dot]com/5wqexm5) Regards,

 Zebra 12 points

Hi! This is the short link to a Google translation of that page: tinyurl[dot]com/5wqexm5 Regards,

 PerlCoder 47 points

Use Google Chrome browser, it translates for you.

 Larm08 152 points

too small than I hope

 Sam I Am 149 points

They are in stock now.

 tommo2 336 points

there in 309 in stock woohoo

 NutSpirit 8 points

Hi ! The KX-132 can be glued on this pan/tilt And I think that it's the biggest cam which can bu used with it.

 TOULOUSE 14 points

my rcv922 monted very nice on this pan tilt !!! y glue with hk glue nice prod

 KMart 44 points

try one of the HDPE plastic cases on your cx-161. with a little trimming (don't worry, its easy to trim the soft plastic case) it fits well. I believe they are at ****cctvohio****

 Miles-away 510 points

Make sure to sign into email alert. Best way to get notified when stck arrives.

 PerlCoder 47 points

How to I get to read that page? It says I have insufficient permissions.

 KMart 44 points

With a 180 servo for pan! Please?

 Eric1180 2278 points

Do they have to give a reason? No one knows

 H-KING_SCOTT 5156 points

We're human. Please accept our apologies.

 KMart 44 points

Jason, no problem. Even the $7 price was good, I was just curious why it had changed (ie- CF instead of Fiberglass, changed hardware, etc.)

Now, how about some 180 servos to match? 180 rotation on pan is the best way to go. :)

 pidjones 97 points

Human? I doubt it. You are actually all robots scheming to place your spare parts throughout the world in our hobby closets by selling them to us at ridiculously low prices. Then, when you begin your assault - you will have repair parts everywhere! I'm on to you, model# 5001 son of model JA!