HobbyKing Online R/C Hobby Store : Micro Linear Servo 2.1g (Right)

View all comments | (8 threads)

Ask a question

5/19/2010
maxic62 (72%)
It is compatible with Blade MCX ?

2/24/2010
Ednac (77%)
What is the travel of this servo? From the photo, it looks like a bit more than the width of a servo connector - ? 10mm ?

2/3/2010
Martin. (39%)
Hi guys,

Do you know how much it weighs in total, so including the electronics and wires?

Thanks,
Martin

magnusEl (82%)
The servo with wire is 2,73g...
Wire with connector is 0,82g.
Shrinktube over electronic is 0,19g.
Electronic is 0,52g.

No way near the claimed 1,5g, but I did not expect that.

But I do belive it could be under 2g with some mods, first is to change the wire and connector.

This customer was awarded a credit for their answer.

1/30/2010
wim verleyen (50%)
Hi guys,

Can someone tell me if this works with a normal FM-receiver?

As I'm been told the Spektrum ones do...

Regards.

magnusEl (82%)
The spektrum linear servo do work with any reciver, BUT they can only withstand 1 LiPo cell, Max 4,2 volts. I think this one to have the 4,2 v max limit.
Many recivers do work with one cell, but you have to test it yourself to bee sure your does.

Magnus

wim verleyen (50%)
Yes I knew, thanks.
Has anyone tested this one with an fm receiver?

magnusEl (82%)
Ill do that as soon as I get them. Im 99,9% sure they do work with FM reciver.
It is a Assan produkt:
****rcgroups****/forums/showpost.php?p=14066492&postcount=4663

magnusEl (82%)
They do work.

Eric1180 (10%)
They will.

1/29/2010
drrk24 (75%)

Specs:
how much force - 30g (as V-tail version)?
LOL: "stanadard Rx / 1S-LiPo"
(contradiction by itself ! )
Would be better to know, whether operation is still released for a 5V-limit.

Why not introduced together w/ "Left" version ?!

drrk24 (75%)
correction: Left is here but not posted as new !!!

1/29/2010
po_au (81%)
So, this is (RIGHT), where is (LEFT)?

raptor_flyer (76%)
Look in the micro servo's section and you'll find the left ones

LAzyZero (65%)
What is the diverence between Left and right Version?

Eric1180 (10%)
Well ... one is .. JK the electronics seem to be on opposite sides.. so if you were to attach a rod it has to exit to the right side for right servo.. if you wanted rod to exit on left side of right servo you would have to rotate the servo which might cause the wires to get in the way.

flightclub2 (5%)
They are both in stock now. Get'em while there hot!

1/29/2010
ishady (68%)
I think somebody ask for a micro servo and HK granted it as you wish...greatt jobb Jason.
Now I wish for HK compatible micro receiver please...

Trance183 (90%)
I remember asking for this somewhere on the 4th page of the forum sticky. Thank you Jason and HK. I shed great joy for this one. :D

rcmodelreviews. (90%)
There are other RC systems out there with much lighter receivers. FD and Assan have some *very* small postage-stamp sized receivers and FrSky has one that weighs 2.8g *with* the plastic.

Ballemann (85%)
Well... I wouldn't say they granted our wish, these servos are never, and probably never Will be in stock..

1/29/2010
MegaTesla (84%)
Still the heavy wire and plug. But at least its here and the price is right!!

Trance183 (90%)
Yeah I'm thinking about removing the JR housing and soldering directly to Rx. Only problem I have now is that I still use the HK Module which has a 5g Rx w/o the Plastic Casing. Maybe HK can release a Micro Rx?

ishady (68%)
Yeah, same here Trance
Waiting mode ON for HK micro rx
Btw, I also use HK standard rx but with case (7gram) still a good choice for my mini* better than esky/guanli rx which weight +- 10gram without plastik housing.

Schorhr (48%)
Can anyone tell me what dimensions the motor itself has? :-) Thank you.

Click here to see all comments