Please confirm your location:

Arkansas warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the Arkansas warehouse even better value!
  Item found in the following categories;
> Batteries & Accessories > Li-Poly (All brands)
> Batteries & Accessories > 30C Discharge
> Batteries & Accessories > Turnigy Lipoly
> Batteries & Accessories > Car Hardcase Packs


Turnigy 4500mAh 4S 30C hardcase pack

Turnigy 4500mAh 4S 30C hardcase pack
Turnigy 4500mAh 4S 30C hardcase pack

The new number one in performance and price!
The new Turnigy Lipoly packs deliver full capacity at the said C rate.
You wont find a better deal in Lithium Polymer batteries anywhere!

Minimum Capacity: 4500mAh
Configuration: 4S1P / 14.8v / 4Cell
Constant Discharge: 30C
Peak Discharge (10sec): 40C
Pack Weight: 519g
Pack Size: 138 x 45 x 44mm
Charge Plug: JST-XH
Discharge plug: 4mm Bullet-connector


Capacity(mAh) 4500
Config (s) 4
Discharge (c) 30
Weight (g) 519
Max Charge Rate (C) 2
Length-A(mm) 138
Height-B(mm) 45
Width-C(mm) 44
Update/Add my own data
Customer Data

This product is no-longer available. CLICK HERE TO SEE A WIDE RANGE OF SIMILAR ITEMS

Related Products
Customer Also Bought
Further discounts available for registered & logged-in customers.
 Customer rated
Total of 12 discussions.
Luis Maria  1 points - 10/13/2011
are the mesurments stated above correct?
 fred0000 109 points
my micrometer reads: A:138.28mm B:45.61mm C:43.66mm the measurements supplied in the ad are fairly accurate.
 Luis Maria 1 points
thank you
 Leslie 11 points
Yes they are correct.
Joachim  5 points - 2/16/2011
Hi everybody,
can anybody tell me if the hardcase is easily removable from the battery ? And if so, what thickness does the case have at each side and what weight ?
I only need the battery with its specifications, but the hardcase is too big and too heavy for my application....

And sorry for setting my question as an answer to another question below. I just clicked the wrong button. :-(
 abletowinginc 216 points
the case comes off very easy. its only a mm or 2 thick though
 GeniolocoSinCura 116 points
i am not recommended, if do you damage your pack, lost a this batterie.
and this work by may very harmfull for you.

if you open or broken the cover sealed of alu paper of this batterie, the oxigen from air will touch to lito, in this moment your pack will put in flame

If you not sure, do not open the batterie.
 Sawdust 1910 points
There is quite a range of non hardcase batteries available here, it would be better to use one designed that way as they have at least some protection for the cells and conections.
 Joachim 5 points
Hi everybody,

first of all I thank you very much for your support.
I know well about the danger of treating LiPo cells, that's the reason why I asked if the case is removable EASILY and of course without damaging the cells.I would have shrink-wrapped the cells anyway because I wanted to join two packs together to an 8s pack.
Unfortunately there didnot seem to be many alternatives of non-cased batteries which could match my demand, but as I saw now, some dimensions given to some batteries seem to be simply wrong ! If I had known about the correct dimensions of other batteries (especially the 4,5Ah nano-tech) I would not even have thought about removing the hardcase from that pack above.
I hope HC learns how to take dimensions and specifiy them correctly just to avoid strange thoughts like mine. Now as I know about the correct dimensions of the according nano-tech battery my problem is solved.
 Chris 7 points
Just buy the softcase version???
 Joachim 5 points
Yes Chris ! So please show me the softcase version of this battery !!! Turnigy 4,5Ah, 30C ! Thanks in advance for the link !
 Shannon 7 points
You can order basically the same battery without the hardcase. This will keep you from having to take it off and risk damaging the lipo cells inside>
 Timofonica 23 points
Perfect fit for a LRP spec V2.0 Starter Box, perfect size and power, almost hole week starting engines.
 Karol 5 points
super Lipo !!!!
 Arkwright 6 points
The case is easy to remove since its only "snap" that retain it.
 valeur 1 points
quelel temps je doigt attendre sachant que ma commande aété validé le 18 juin 2011 bizare il vous manque des donéne que sepase t'il,
pouvez m'appellé au 0677098180 pour me prévenir quand est ce que ej vais pouvoir recevoir ces colis
en vous remerciant d'avance!
Racemaxx69  131 points - 2/10/2011
Will this fit in a rc8be buggy? thanks
 WRX _STI 16 points
yes it fits very well and performs great!
 jbcoos 41 points
lenght is 5 1/2" x like 1 3/4" x 1 5/8" also is you esc capable of a 4 cell lipoly and do you have a brushed or brushless motor. if you have a esc built for 3-4 cell lipoly it will work. as long as you have enough room in buggy for the battery.
 ian 28 points
It's possible that it would fit. The RC8Be battery tray is 140mm long, this battery is 138mm. The height may or may not be an issue.
 francisco jose 1 points
if and going very well, I have 6
 Michael 5 points
i got the same package in my asso sc8e. fits very nice.
 Chris 7 points
Yes it should do. I have 2 of these batts and they fit in my BL lightning
 Miguel 10 points
I have just tested it on a RC8Be. Just perfect!! no problem at all :-)
 Ivan 5 points
i think so
 Belt Drive 14 points
This battery will fit allmost any 1/8 conversion including your AE
 STYLIANOS 24 points
i use this battery in my kyosho inferno us sports 1/8 buggy and it fits provides great speed and punch.
 Daniel 5 points
Yes, it will fit great
 Shannon 7 points
Yes, no problem.
 Grzegorz 201 points
Though I am not having rc8be I can say that it fits ofna hyper 9e ideally. It does not bounce around or anything, it's like hyper 9e was designed for this pack, hehehe *-)
 jdwebmaster 5 points
Fits perfect!
 TTRS3 32 points
If these are now ROAR approved when will they show up on the ROAR list so we can use them at a sanctioned event? Till then they cant be used.
 Arkwright 6 points
Yes it will fit, I'm using this kit on a Mugen MBX6-ECO buggy. The ESC is really big, so I need to fit it perfectly. I guess it will be the same on a RC8b. this kit is amazing in a buggy!
 valeur 1 points
quand est ce que je vais recvoir svp mon colis
a bientot!
Customer Reviews
Create an account
Overall Rating
6 thumbs up!
Great battery for my electric conversion of a Revo 3.3 The run time is about 20 minutes, and I have 2 of these to put in parallell which gives me of up to 40min of bashing fun!

No comments. Reply..

Overall Rating
5 thumbs up!
looks good and it should fit my truck. I'll be ordering it after my current order arrives.
weird how both reviews are almost the same and where posted so fast....

1 comment. Reply..

Create an account
Overall Rating
3 thumbs up!
these new batteries are sick! i use it in my 1/8th scale buggy and they have tons of bunch and last a long time and holds a great charge

4 comments. Reply..

Overall Rating
Get Real
2 thumbs up!
I purchased 3 of these,powers good but unfortunately one of them took a dive(landed hard from small jump on concrete and one of the packs failed.. probally a solder joint inside(the cells can move around a little inside the case). I'll open it up and find out when i can,i contacted hobbyking live and they would warranty it. We'll see how the other two packs hold up after more use. Video of the turnigy pack in my rc8te.

No comments. Reply..

Overall Rating
big greg
2 thumbs up!
nice packs, awesome fit in the Ve8, pay attention though as my cells were loose in the case, i had to pop apart the case to secure them

No comments. Reply.. here to see all reviews
Aff. Link